Sharif Digital Repository

An enhancement in heat transfer due to nanofluids is essentially required in various thermal systems. Hybrid nanofluids possess high thermal conductivity and, have ability to embellish and enhance the thermal strength of common fluids. Our concern in this paper is to examine the innovative attributes of hybrid nanofluids like Manganese zinc ferrite (MnZnFe2O4) and Nickel zinc ferrite (NiZnFe2O4) in the bio-convective flow of motile gyrotactic microorganisms subject to Darcy Forchheimer medium. The effect of activation energy has also been taken into account. Mathematical treatment is carried out via MATLAB software. The use of MnZnFe2O4 - NiZnFe2O4/H2O exhibits improved thermal... 

Hydrogen technology through water electrolyzer systems has attracted a great attention to overcome the energy crisis. So, rationally designed non-noble metal based-electrocatalysts with high activity and durability can lead to high performance water electrolyzer systems and high purity hydrogen generation. Herein, a facile two-step method: hydrothermal and electrodeposition, respectively, are developed to decorate highly porous three-dimensional binder-free structure NiFeO/NiO nanosheets array on Ni foam (NiFeO/NiO/NF) with robust adhesion as a high-performance electrode for Hydrogen Evolution Reaction (HER). The electrodeposition process applied after the initial hydrothermal process... 

The structural and dielectric properties of Gadolinium substituted U-type hexaferrites (Sr4Zn2Fe36O60) were investigated. The samples were synthesized via the Sol-gel auto combustion route. In a muffle furnace, these samples were sintered for 5 h at 1250 °C. The pellets of synthesized powder samples were characterized by XRD, PL, Dielectric, FTIR, and Raman spectroscopies. Structural elucidation of Sr4Zn2Fe36-xGdxO60 was done via XRD. The obtained XRD patterns were matched with the prior literature. The impact of Gd3+ substitutions was measured on all the lattice parameters. Lattice constants “a" and “c" were found between 5.871 and 5.900 Å and 111.76–112.23 Å, respectively. The PL spectra... 

The search for cathode materials with fast oxygen reduction reaction (ORR) catalytic activities and high ionic conductivity is the key obstacle to SOFCs commercialization and its operation at low temperatures. In order to search for a cathode with enhanced catalytic functionality, herein we report a single-phase CoFe2O4 (CFO) and CoGd0.2Fe1.80O4 (CGFO), which can be employed as an active cathode to improve electrocatalytic ORR functionalities at low temperature. It is found that CGFO having enriched oxygen vacancies exhibits the least polarization resistance (RP) of 0.42 Ωcm2 compared to the pure CFO which shows polarization resistance of 0.56 Ω cm2 under H2/air conditions. Furthermore,... 

Hybrid nanofluids are new and most fascinating types of fluids that involve superior thermal characteristics. These fluids exhibit better heat-transfer performance as equated to conventional fluids. Our concern, in this paper, is to numerically interpret the kerosene oil-based hybrid nanofluids comprising dissimilar nanoparticles like silver (Ag) and manganese zinc ferrite (MnZnFe2O4). A numerical algorithm, which is mainly based on finite difference discretization, is developed to find the numerical solution of the problem. A numerical comparison appraises the efficiency of this algorithm. The effects of physical parameters are examined via the graphical representations in either case of... 

The productive and straightforward strategy was developed to fabricate graphene based NiFe2O4 doped rare-earth (RE) ions nanocomposites for enhancing the magnetic and structural characteristics of ferrites. RE nanoparticles (NPs) such as Yb3+, Gd3+ and Sm3+ were doped in NiFe2O4 ferrite structure via sol-gel auto-combustion method and hydrothermal method was utilized to fabricate their graphene-based nanocomposites. The weight loss and decomposition of the nanocomposites were determined using temperature-dependent thermo gravimetric analysis (TGA/DTA). The single-phase structure of the NiFe2O4, NiFe2O4/G, Yb doped NiFe2O4/G, Gd doped NiFe2O4/G, and Sm doped NiFe2O4/G nanocomposites was... 

Given the growing need for renewable energy and related technologies, researches have shifted to develop low-cost, stable, high-efficiency electrocatalysts in clean energy generation reactions such as water electrolysis. In the present paper, a three-dimensional Fe2TiO5/nitrogen-doped graphene (3D FTO/NG) nanocomposite is prepared using a simple, cheap and fast method, called chemical bath deposition (CBD). Structural and physical characterizations of the prepared electrocatalysts are performed by different methods such as Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray spectroscopy (EDX), Fourier Transform InfraRed spectra (FT-IR), Dynamic Light Scattering... 

In this work, cycling-induced aging occurring in 18650-type LiFePO4/graphite full cells at different C-rates is studied extensively. The mechanism of performance degradation is investigated using a combination of electrochemical and microstructural analyses. Half-cell studies are carried out after dismantling the full cells, using fresh and cycled LiFePO4 cathode and graphite anode to independently study them. The results show that the capacity of LiFePO4 electrodes is significantly recovered. The rate of capacity fading in the discharge state considered as irreversible capacity in the graphite is higher than LiFePO4 half cells, indicating a greater degradation in the performance of this... 

The controlled and stable crystal structure, reduction in Curie temperature and semiconducting nature of oxide materials are the key factors for magnetoelectrical applications. Therefore, Co0.6Mn0.4GdxFe2-xO4 where x = 0, 0.033, 0.066 and 0.10 were synthesized to analyse the structural, morphological, magnetic, and electrical properties using a sol-gel autocombustion approach. The X-ray diffraction pattern reveals that the cubic crystallite size decreases with increasing smaller content of Gd3+ oxides without any secondary phase. Field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM) study explain the complete morphology,... 

Rare earth oxides with a trivalent nature play a pivotal role in reinforcing the magneto-optical attributes of spinel ferrite nanoparticles by replacing Fe3+ ions. In this study, rare earth Gd oxide doped with CoFe2O4 NPs with a composition of Co1+xGdxFe2-2xO4 (x = 0, 0.05, 0.10, and 0.15) were synthesized using sol-gel auto-combustion. The outcome of Gd cations on the physical, magneto-optical and electrical characteristics of the cobalt ferrite NPs were reported. X-ray diffraction (XRD), and Fourier transform infrared (FTIR) investigations confirmed the single-phase cubic crystalline nature and metal ion stretching in the cobalt ferrite synthesized samples. Decreasing drift in the average... 

A five-coordinated Fe(III) complex with the distorted trigonal bipyramidal configuration was synthesized by reactions of FeCl36H2O and 2-(2′-hydroxyphenyl)oxazoline (Hphox) as a bidentate ON donor oxazoline ligand. Complex [Fe(phox)2Cl] was fully characterized, including by single-crystal X-ray structure analysis. DFT calculations were accompanied with experimental results in order to obtain a deeper insight into the electronic structure and vibrational normal modes of complex. Oxidation of sulfides to sulfoxides in one-step was conducted by this complex as catalyst using urea hydrogen peroxide (UHP) in mixture of CH2Cl 2/CH3OH (1:1) under air at room temperature. The results show that using... 

Nanocrystalline TiO 2-Fe 2O 3 thin films and powders were prepared by a straightforward aqueous particulate sol-gel route at the low temperature of 300 °C. Titanium(IV) isopropoxide and iron(III) chloride were used as precursors, and hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the powder crystallised at the low temperature of 300 °C, containing anatase-TiO 2 and hematite-Fe 2O 3 phases. Furthermore, it was found that Fe 2O 3 retarded the anatase-to-rutile transformation up to 500 °C. The activation energies for crystallite growth of TiO 2... 

The synthesis of a new drug delivery system based on hybrid nanomaterials containing a β-CD core and hyperbranched PG is described. Conjugating PG branches onto β-CD not only increases its water solubility but also affects its host/guest properties deeply. It can form molecular inclusion complexes with small hydrophobic guest molecules such as ferrocene or FITC with reasonable release. In addition, the achievable payloads are significantly higher as for carriers such as hyperbranched PGs. Short-term in vitro cytotoxicity and hemocompatibility tests on L929 cell lines show that the hybrid nanomaterial is highly biocompatible. Due to their outstanding properties, β-CD-g-PG hybrid nanomaterials... 

Four derivatives of hyaluronic acid (HA) bearing thiol (HA-SH), hydrazide (HA-hy), 2-dithiopyridyl (HA-SSPy), and aldehyde groups (HA-al) respectively were synthesized. Thiol and 2-dithiopyridyl as well as hydrazide and aldehyde make up two chemically orthogonal pairs of chemo-selective functionalities that allow in situ formation of interpenetrating (IPN) disulfide and hydrazone networks simultaneously upon the mixing of the above derivatives at once. The formation of IPN was demonstrated by comparing it with the formulations of the same total HA concentration but lacking one of the reactive components. The hydrogel composed of all four components was characterized by a larger elastic... 

An aluminum-magnesium alloy was friction-stir processed in the presence of TiO2 nanoparticles which were pre-placed in a groove on the surface to produce a composite. Field emission-scanning and transmission electron microscopy studies show that solid state chemical reactions occur between the Al-Mg matrix and the ceramic particles upon the severe plastic deformation process. The microstructure of the aluminum alloy consists of a coarse grain structure, large complex (Fe,Mn,Cr)3SiAl12 particles, and small Mg2Si precipitates. After friction stir processing, a deformed grain structure containing rod-like Al-Fe-Mn-Si precipitates is attained, along... 

The MgO-supported Fe-Co-Mn catalysts, prepared using co-precipitation procedure, were tested for production of light olefins via CO hydrogenation reaction. The effect of a range of drying conditions including drying temperature and drying time on the structure and catalytic performance of Fe-Co-Mn/MgO catalyst for Fischer-Tropsch synthesis was investigated in a fixed bed micro-reactor under the same operational conditions of T = 350 °C, P = 1 bar, H2/CO = 2/1, and GHSV = 4500 h-1. It was found that the catalyst dried at 120 °C for 16 h has shown the best catalytic performance for CO hydrogenation. Furthermore, the effect of drying conditions on different surface reaction rates was also... 

This study reports the importance of physicochemical characteristics of the core-shell structured polymer-coated Fe3O4 cluster@SiO2 nanocomposite particles for designing the biocatalysts used for transesterification of soybean oil. To demonstrate this issue, two different types of polymer molecules such as polyethylenimine (PEI) and polyacrylic acid (PAA) each with two different molecular weights are employed. The highest fatty acid methyl esters (FAMEs) synthesis yield values are achieved by the lipases immobilized onto the low- and high-molecular-weight PEI-coated particles as compared to those of the low- and high-molecular-weight PAA-coated particles (i.e., ∼64.8% and ∼73.1% versus... 

Mononuclear nonheme iron containing systems are versatile and vital oxidants of substrate hydroxylation reactions in many biosystems, whereby the rate constant of hydroxylation correlates with the strength of the C-H bond that is broken in the process. The thermodynamic reason behind these correlations, however, has never been established. In this work results of a series of density functional theory calculations of substrate hydroxylation by a mononuclear nonheme iron(IV)-oxo oxidant with a 2 His/ 1Asp structural motif analogous to aketoglutarate dependent dioxygenases are presented. The calculations show that these oxidants are very efficient and able to hydroxylate strong C-H bonds,... 

Effects of Fe particle volume percent (from 0 to 5%) and changing the tool rotation direction in each pass were studied on the microstructure evolution and mechanical properties of the in situ Al/intermetallic composites produced by three passes friction stir processing (FSP) with ∼10 µm Fe particles. Optical and scanning electron microscopes were used for the investigation of the composite homogeneity, formation of Al–Fe intermetallic compounds, and fracture surfaces. Tensile and microhardness tests were also carried out to evaluate the mechanical properties of the composites. Solid-state reactions between the aluminum matrix and Fe particles led to in situ formation of Al3Fe and Al5Fe2... 

Pr doped spinel nanoferrites having following composition Cu Pr x Fe 2-x O 4 (x = 0, 0.25, 0.50, 0.75, 1.00) were synthesized using sol-gel route. Prosademium (Pr) which is a rare earth metal was doped to tailor the properties of the Cu spinel nanoferrites. Characterization tools such as FTIR, XRD, FESEM and VSM were employed to investigate the phase, absorption bands, structure, microstructure and magnetic properties. FTIR was used to see the absorption bands and force constants of the Pr doped Cu spinel nanoferrites. Crystallite size, lattice parameters, cell volume and micro strains were determined from XRD data. Bulk density, X-ray density and porosity of the Pr doped Cu spinel...