Sharif Digital Repository

Novel types of highly swelling hydrogels (superabsorbent) were prepared by grafting crosslinked poly acrylic acid-co-2-hydroxyethylmetacrylate (PAA-co-HEMA) chains onto starch through a free radical polymerization method. The effect of grafting variables (i.e., concentration of methylenebisacrylamide (MBA), acrylic acid/2-hydroxy methymetacrylate (AA/HEMA) weight ratio, ammonium persulfate (APS), starch, neutralization percent, were systematically optimized to achieve a hydrogel with a maximum swelling capacity. The superabsorbent (SAP) formation was confirmed by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The controlled-release behavior of... 

Novel ZnO-carbon and ZnO nanofibers were fabricated by electrospinning of polymer precursor followed by subsequent annealing in nitrogen and air, respectively. Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) indicated the smooth and beadless nanofibers with wurtzite crystal structure. X-ray photoelectron spectroscopy (XPS) showed the presence of oxygen vacancies (VO) and chemisorbed O2 on the surface of the samples. Band gap narrowing of the ZnO-carbon nanofibers in comparison to ZnO were measured by diffuse reflectance spectroscopy (DRS). Photo-degradation of azo dye under the UV and visible light was evaluated and ZnO-carbon showed an enhancement in... 

The relatively new applications of superabsorbent polymers (SAPs) in cement based materials call for investigations regarding their behaviors in relation to other constituents in the system. Colloidal silica nanoparticles (CS) are becoming increasingly important for the improvement of strength and durability of cement based materials. In this study, a poly (AA-co-AM) SAP was synthesized by free radical polymerization, and its behaviors in cement based composites incorporating CS were investigated. These included swelling behavior, setting time, mechanical performance in different curing conditions, and rheological properties of fresh pastes. The observation of an unusual reduction in... 

This article reports the first oil-absorbent cross-linked copolymer consisting of modified multiwalled carbon nanotube (MWCNT) and showing high oil absorbency. Also, to investigate and evaluate the effective parameters on oil absorbency, cross-linked dodecyl methacrylate (DDMA)-diphenylacrylamide (DPAA) and DDMA-butyl acrylate (BA) copolymers were synthesized. DDMA was copolymerized with different mol% of DPAA or BA and cross-linked using azobisisobutyronitrile as the initiator and various weight percentages of 1,4-butandiol dimethacrylate, methylene bisacrylamide, or vinyl group-modified MWCNT cross-linkers. The effects of monomer feed composition, cross-linker concentration, and the... 

Rice bran is one of the most important co-products in the rice milling. In this research, antioxidant activity of two Iranian rice bran varieties, Fajr and Tarem, extracted by three different solvents (methanol, ethanol and ethyl acetate) was evaluated. The order of antioxidant activity was evaluated by measurement of total phenolic content, antioxidant activity in linoleic acid system, reducing power and scavenging capacity by DPPH radical. The methanolic extract of Fajr rice bran showed a total phenolic content of 3.31 mg Gallic acid/gr rice bran and a DPPH free radical-scavenging activity of 93.91%, achieved at 50 mg/ml concentration, and a percent inhibition of linoleic acid peroxidation... 

In this research, a series of numerical simulations were conducted utilizing computational fluid dynamics (CFD) software in order to predict the heat transfer performance of queues nanofluids containing clove-treated graphene nanoplatelets (CGNPs) flowing in a horizontal stainless steel heated pipe. The GNPs were covalently functionalized with clove buds using free radical grafting reaction using an eco-friendly process. The advantage of this synthesis method was that it did not use hazardous acids, which are typically used in traditional treatment methods of carbon nanostructures. The thermo-physical properties of the aqueous nanofluids obtained experimentally were used as inputs for the... 

Temperature-sensitive hydrogels based on N-t-butylacrylamide (TBA), acrylamide (AAm), and sodium alginate were prepared by free radical polymerization method. Methylenebisacrylamide (MBA) and amonium persulfate (APS) were applied as water soluble crosslinker and initiator, respectively. The chemical structure of the hydrogels was confirmed by FT-IR spectroscopy and thermogravimetric analysis (TCA) methods. Morphology of the samples was examined by scanning electron microscopy (SEM). By changing the initial TBA/AAm mole ratios, hydrogels with different swelling properties were obtained. The rate parameters were found to be 2.0, 2.4, and 3.5 min for the superabsorbents with AAm/TBA weight... 

A novel thermosensitive hydrogel was synthesized by block copolymerization of monomethoxy poly(ethylene glycol) macromere (PEG) onto chitosan backbone, using potassium per sulfate as a free radical initiator. This block copolymer exhibits a thermoreversible transition from an injectable solution at low temperature to a gel at body temperature. Synthesized copolymers were characterized using FT-IR, 1H NMR, 13C NMR, and DSC techniques. Solubility test was performed to compare water and organo-solubility of chitosan before and after copolymerization. Sol-gel transition behavior was investigated using the vial inversion method and viscosity measurements. The gelation behavior makes the... 

A magnetic vanadium oxide nanoparticles supported on spinel copper ferrite (CuFe2O4–VOx) are prepared, characterized, and examined for the peroxymonosulfate (PMS) activation to degrade Rhodamine B (RhB) in water solution. Interestingly, the results show that despite the inability of mixture of copper ferrite and vanadium oxides nanoparticles to the effective RhB decomposition, the prepared catalyst exhibits an excellent catalytic ability toward RhB oxidation. The influence of vital parameters, such as temperature, PMS concentration, catalyst loading, and initial pH are discussed comprehensively. The kinetic studies demonstrate that the pseudo-first-order model is well fitted for RhB... 

A high sensitive upper critical solution temperature (UCST) copolymer was synthesized through free radical copolymerization with acrylamide (AAm) and vinyl acetate (VA). The UCST behavior is due to a combination of hydrogen bonds and electrostatic potentials between copolymer chains. Turbidimetry, dynamic light scattering, and rheology studies were used to determine the phase transition and aggregation behavior. It is indicated that copolymer with 80% AAm has a phase transition temperature between 38 and 38.2 °C, which is suitable for releasing fever medicine. Also, the temperature gradient for the complete dissolution of the copolymer is 2 °C. The molecular dynamics simulations at a... 

Mononuclear nonheme iron containing systems are versatile and vital oxidants of substrate hydroxylation reactions in many biosystems, whereby the rate constant of hydroxylation correlates with the strength of the C-H bond that is broken in the process. The thermodynamic reason behind these correlations, however, has never been established. In this work results of a series of density functional theory calculations of substrate hydroxylation by a mononuclear nonheme iron(IV)-oxo oxidant with a 2 His/ 1Asp structural motif analogous to aketoglutarate dependent dioxygenases are presented. The calculations show that these oxidants are very efficient and able to hydroxylate strong C-H bonds,... 

Mn-doped ZnO nanoparticles, Zn1−xMnxO, were synthesised by a polyethylene glycol (PEG) sol–gel method and the physicochemical properties of compounds were characterised by atomic absorption spectroscopy (AAS), energy-dispersive X-ray analysis, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The catalytic degradation of an organic dye, methylene blue (MB), in the presence of Zn1−xMnxO as the catalyst and hydrogen peroxide (H2O2) as the oxidant at room temperature in water has been studied. Effects of oxidant, catalyst amount, catalyst composition, pH value of the solution and an OH-radical... 

Herein, a facile and versatile method for the synthesis of a novel magnetic nanocarrier via surface- initiated reversible addition-fragmentation chain transfer (RAFT) polymerization is introduced. At first, RAFT agent was successfully attached to the surface of Fe 3 O 4 nanoparticles and, then, poly (glycidyl methacrylate) (PGMA) chains were grown and anchored onto the surface of Fe 3 O 4 nanoparticles. At the end, hydrazine (Hy) groups were introduced to the PGMA chains via reaction between epoxy rings and hydrazine molecules. Doxorubicin (DOX) was covalently conjugated to the prepared nanocarrier (Fe 3 O 4 @PGMA@Hy) through a hydrazone linkage. The in vitro drug release of Fe 3 O 4... 

The simultaneous oxidation performance of benzene, toluene, ethylbenzene, and xylene (BTEX) by nanoscale calcium peroxide particles (nCaO2) activated with ferric ions (Fe(III)) and the mechanism of the enhancement of BTEX degradation by L-cysteine (L-cys) were investigated. The batch experimental results showed that the nCaO2/Fe(III)/L-cys process was effective in the destruction of BTEX in both ultrapure water and actual groundwater. A proper amount of L-cys could enhance BTEX degradation due to the promotion of Fe(II)/Fe(III) redox cycles by the participation of L-cys, but an excessive presence of L-cys would cause inhibition. Adding 1.0 mM L-cys to the nCaO2/Fe(III) system, the...