Sharif Digital Repository

In this work we have applied the Dense System Equation of State (DSEOS) to electrolyte solutions. We have found that this equation of state can predict the density of electrolyte solutions very accurately. It has been tested for different electrolytes solutions at different temperatures and compositions. A hypothetical binary model has been applied to find the dependencies of parameters of this equation of state on solution temperature and composition. Using such a simple model the heat capacity of NaCl solution was calculated for which the absolute percent deviation is less than 2 %. The DSEOS is tested for the following electrolytes: Na2SO4, MgCl2, MgSO4, KCl, NaCl, and NaBr. We found that... 

The non-primitive mean spherical approximation (NP-MSA) based models were used to correlate the individual and the mean ionic activity coefficients of the symmetric and asymmetric aqueous electrolyte solutions. The results of the models for the mean ionic activity coefficients were directly used to calculate the osmotic coefficient for the electrolyte solutions studied in this work. In the NP-MSA models, the Ghotbi-Vera and the Boublik-Mansoori-Carnahan-Starling- Leland hard sphere equation of state as the reference system coupled with the non-primitive mean spherical approximation model (NP-GV-MSA and NP-BMCSL-MSA models, respectively). In correlating the mean ionic activity coefficients of... 

A deterministic model based on the discrete population balance equation (PBE) is used to examine the precipitation of barium sulfate nanoparticles in nonionic inverse microemulsion systems. It is shown that coagulation can have a significant effect at low initial reactants concentration. The simulation results show that a bimodal particle size distribution (PSD) observed in experimental analysis reported in the literature cannot be predicted by neglecting the coagulation effect. A coagulation kernel is proposed that takes into account the effect of interparticle forces through the Fuchs' stability ratio. The effect of electrolyte concentration on the surfactant headgroup area is also... 

In past decades, many attempts have been made to use water-soluble polymers as a mobility control agent to improve sweep efficiency of enhanced oil recovery processes. However, sensitivity of the thickening behavior of these polymers to some harsh conditions, such as high salinity, has cast serious doubt on their applicability in reservoir conditions. By expansion of nanotechnology, scientists discovered that nanoparticles can be utilized as thickening and rheology control agents in many polymer solutions. In this study, hydrophilic fumed silica is added to hydrolyzed polyacrylamide and sulfonated polyacrylamide solutions. The effect of the addition of nano silica on the thickening and... 

The formation of the oxide layer with Zr compounds on AZ31 Mg alloy processed by two-step plasma electrolytic oxidation (PEO) has been investigated. After the PEO process first in an alkaline phosphate electrolyte and second in an acid electrolyte containing K2ZrF6, the microstructure, chemical composition, and phase composition of the oxide layers were analyzed via SEM, EDS, and XRD, respectively. The electrochemical reaction and the high temperature caused by the plasma discharges in the electrolyte were the main factors leading to the fabrication of an oxide layer containing Zr compounds on AZ31 Mg alloy. The micro-pores were filled with ZrO2 formed during the PEO process. The results of... 

Sulfur doped and pure micro-nanoporous TiO2 film were synthesized with PEO method to produce a film with a high surface area for photocatalysis applications. The effect of applied voltage and electrolyte concentration on the microstructure and photocatalytic properties of the prepared layer were investigated via SEM, XRD, EIS and DRS studies. Electrochemical Impedance Spectroscopy (EIS) was carried out in order to determine the corrosion and electrochemical properties of the produced layer. It was found that although the barrier layer resistance decreases with the voltage, the layers porosity and consequently the surface area increases. Finally the XRD and DRS spectrums were correlated with... 

The effects of the current density on the microstructure and the corrosion property of the coating on AZ31 Mg alloy processed by the plasma electrolytic oxidation (PEO) were investigated. The present coatings were produced in an acid electrolyte containing K2ZrF6 with three different current densities, i.e., 100, 150, and 200 mA/cm2. From the microstructural observations, as the applied current density was increased, the diameter of micro-pores formed by the plasma discharges with high temperature increased. The coatings on AZ31 Mg alloy were mainly composed of MgO, ZrO 2, MgF2, and Mg2Zr5O12 phases. The results of potentiodynamic polarization clearly showed that the PEO-treated AZ31 Mg... 

Alumina-silicate composite coatings were formed on titanium substrate by plasma electrolytic oxidation (PEO) process using a silicate-based electrolyte containing alumina nanoparticles. Microstructure, chemical and phase compositions, and thickness of the coatings were investigated to determine, coating mechanism and probable reactions during the process. The effect of processing time on corrosion resistance of the coatings was investigated using the potentiodynamic polarization test. Barrier layer (TiO2) formation, micro arcs occurrence, and electrolyte ionization were the main stages of PEO coating growth process. Alumina nanoparticles were incorporated into the coating by cataphoretic and... 

Using multi-walled carbon nanotubes (MWCNTs), the present study focuses on their electrochemical hydrogen storage capacities. The results showed that the hydrogen desorption process is composed of two steps with voltages around -0.75 and -0.15 V. Hydrogen adsorption at -0.15 V took place at temperatures above 30 °C, and the amount of energy required for adsorbing hydrogen was 1.68 eV. The hydrogen storage capacity increased with increasing electrolyte temperature from 30 to 60 °C in both steps. The hydrogen storage capacity of the MWCNTs treated at different atmospheres showed that the decrease in the graphitization of MWCNTs led to the increase in hydrogen adsorption. The results also... 

An efficient electrocatalyst for Pt-free I−/I3 − reduction has been synthesized by high temperature treatment of graphene oxide-cobalt phthalocyanine mixtures. The graphitic material was characterized by various techniques and was found to consist of reduced graphene oxide carrying CoN3 entities, obtained by thermal decomposition of cobalt phthalocyanine. This material had an ionization potential equal to 4.9±0.1 eV and thus it was judged appropriate to act as reduction electrocatalyst for the I−/I3 − redox electrolyte. It was subsequently deposited as thin film on FTO electrodes, which were employed as counter electrodes for dye-sensitized solar cells. Its capacity to reduce I−/I3 − redox... 

In dye-sensitized solar cells recombination reactions at the TiO2 photoanode with the electrolyte interface plays a critical role in cell efficiency. Recombination of injected electrons in the TiO2 with acceptors in the electrolyte usually occurs on uncovered areas of TiO2 surfaces. In this work, we report electropolymerization of polymer films on nanoporous TiO2 electrode surfaces using an ionic liquid as the growth medium. The choice of ionic liquid as the growth medium for this study is based on the insolubility of dye N719 in this electrolyte, thus avoiding dye molecule detachment from the TiO2 photoanode surface over the entire potential range investigated during the... 

The presence of impurities in the copper electrolyte increases the energy consumption of an electrorefining process and contaminates the deposited copper on cathode. The concentration of impurities increases over time making it necessary to remove them from the solution. This research introduces a fast, effective, and simple method to refine the industrial electrolyte from arsenic, iron and antimony by solvent displacement crystallisation technique. In this method, when alcohol is added to the electrolyte, the impurities precipitate from the solution as amorphous arsenato antimonite phase. Results show that Fe, Sb, and As are removed from the copper electrolyte by 75.2, 96.9 and 99.8%,... 

The presence of impurities in the copper electrolyte increases the energy consumption of an electrorefining process and contaminates the deposited copper on cathode. The concentration of impurities increases over time making it necessary to remove them from the solution. This research introduces a fast, effective, and simple method to refine the industrial electrolyte from arsenic, iron and antimony by solvent displacement crystallisation technique. In this method, when alcohol is added to the electrolyte, the impurities precipitate from the solution as amorphous arsenato antimonite phase. Results show that Fe, Sb, and As are removed from the copper electrolyte by 75.2, 96.9 and 99.8%,... 

Presence of sulfur components in liquid fuels should be controlled due to environmental issues and process considerations. In order to decrease the level of sulfurous compounds in crude gas-oil with 5750 ppmw sulfur, electrochemical oxidative desulfurization has been investigated over electrodes of copper and stainless steel because of their easy operation and mild process conditions. In this research, the effects of stirring rate, temperature, applied potential, sodium hydroxide addition as electrolyte media and water volume have been examined on the sulfur removal efficiency. The results show that electrical conductivity of gas-oil sharply increases with addition of electrolyte up to 613... 

In this work, cycling-induced aging occurring in 18650-type LiFePO4/graphite full cells at different C-rates is studied extensively. The mechanism of performance degradation is investigated using a combination of electrochemical and microstructural analyses. Half-cell studies are carried out after dismantling the full cells, using fresh and cycled LiFePO4 cathode and graphite anode to independently study them. The results show that the capacity of LiFePO4 electrodes is significantly recovered. The rate of capacity fading in the discharge state considered as irreversible capacity in the graphite is higher than LiFePO4 half cells, indicating a greater degradation in the performance of this...