Sharif Digital Repository

In this paper, a novel six-phase outer rotor induction motor equipped with pseudo-concentrated windings is introduced as a robust, reliable, and low-cost solution. Multiple aspects of the proposed motor structure have been investigated such as a design algorithm and an analytical modeling based on the modified winding function considering the skew effect. The effect of using variable number of turns for the coils has been examined on the pseudo-concentrated windings. An appropriate optimization problem has been also defined to maximize the power factor and efficiency and to minimize the output torque ripple. The designed motor has been fabricated to verify the accuracy of the design... 

This work is concerned with the experimental investigation of mass transfer, which occurs during diffusion of hydrocarbon solvents in heavy oil based on constant and concentration-dependent diffusion coefficient. Here, a series of free fall diffusion experiments have been conducted in sealed test tubes at fixed temperatures. Pentane, hexane, and octane were used as solvents and were placed on heavy oil in tubes. The diffusivity of heavy oil into solvents was monitored by a digital camera. The image analysis technique was applied to extract concentration profiles in diffusion zones of solvents by means of calibration curves. Fick's second law was used to obtain both constant and... 

There are many fundamental problems with the injection of nano-zero-valent iron (NZVI) particles to create permeable reactive barrier (PRB) treatment zone. Among them the loss of medium porosity or pore blocking over time can be considered which leads to reduction of permeability and bypass of the flow and contaminant plume up-gradient of the PRB. Present study provides a solution for such problems by confining the target zone for injection to the gate in a funnel-and-gate configuration. A laboratory-scale experimental setup is used in this work. In the designed PRB gate, no additional material from porous media exists. NZVI (d 50 = 52 ± 5 nm) particles are synthesized in water mixed with... 

The present study has been conducted to investigate the effect of inlet flow regimes on vertical velocity and concentration profiles of the turbidity current. Experiments carried out on small scale channel and Kaolin with a density of 2.65 kg/m3 and a mean particle diameter of 4.5 μm, was used to generate the currents. Velocities were obtained at a rate of 10 Hz using an acoustic Doppler velocimeter. Using the siphon sampling approach, the acoustic backscattering intensity was calibrated and concentration was determined using a backscattering analysis. Results showed that the ratio of maximum velocity height to the height of the current was around 0.4-0.5 in sub- and super-critical regimes.... 

The flux behavior during the industrial cross-flow ultrafiltration of apple juice in a batch process was modeled using a combination of the fouling and concentration polarization models. It was observed that the major flux reduction was at the beginning and at the end of operation due to fouling and increasing solute concentration in the feed tank, respectively. The fouling phenomenon was analyzed by classical and empirical models and it was shown that the empirical one has the best correlation within less than 0.3% error for each experiment. The most significant advantage of this model is its ability to predict a steady flux, while other models predict zero flux at infinite time, which is... 

Enzymatic decolorization of the monoazo dye, acid orange 7 (AO7) by the fungal peroxidase from Coprinus cinereus NBRC 30628 is a complex system, which is greatly affected by temperature, pH, enzyme activity and the concentrations of H2O2 and dye concentration. The study of these factors and investigating the combined interactions between them by applying one-factor-at-a-time (OFAT) method and two other statistical methods including 2-factorial method and response surface methodology (RSM) were aimed in this work. Through OFAT analysis the optimized conditions were a temperature of 25 °C, pH 9.0 with H2O2 concentration of about 3.9 mM and AO7 concentration of 40 mg/l. A complete... 

Rheological behavior of agglomerated silver nanoparticles (~ 40 nm) suspended in diethylene glycol over a wide range of volumetric solids concentrations (φ{symbol} = 0.11-4.38%) was studied. The nanoparticle suspensions generally exhibited a yield pseudoplastic behavior. Bingham plastic, Herschel-Bulkley and Casson models were used to evaluate the shear stress-shear rate dependency. Analyzing the effect of silver concentrations on the yield stress and viscosity of the suspensions followed an exponential form, revealing an increase in the degree of interparticle interactions with increasing solid concentrations. Fractal dimension (Df) was estimated from the suspension yield stress and... 

High pole number permanent magnet (PM) motors, due to their high torque density, have been receiving considerable attentions in recent years. To achieve an accurate position control in PM machines, resolvers are suggested for industrial applications. Mechanical and electromagnetic considerations in the case of high pole number resolvers lead the machine designers to choose small cores with low slot numbers. This paper proposes two different on-tooth winding configurations to achieve high pole number without increasing the slot numbers, while the accuracy of the detected position is intended to be the maximum value. Variable turn on tooth winding (VTTW) is compared with fractional slot... 

In this work, the potential for the auto-ignition of Iranian heavy oil during in situ combustion (ISC) process conditions was studied. Kinetic studies were carried out using thermal analysis techniques. Effects of oxygen partial pressure, reservoir pressure, and clay on the auto-ignition condition were investigated. Based on the experimental results obtained, a kinetic equation was derived for each of the different oil samples in the presence of different sands. The effect of partial pressure of oxygen in the injected air showed that at atmospheric pressure, low temperature combustion (LTC) was initiated at 275°C. Also, enriching the injected air by oxygen lowers the initial LTC temperature... 

Bactericidal activity of high concentration Ag nanoparticles immobilized on surface of an aqueous sol-gel silica thin film was investigated against Escherichia coli and Staphylococcus aureus bacteria. Size of the surface nanoparticles was estimated in the range of 35-80 nm by using atomic force microscopy. Due to accumulation of the silver nanoparticles at near the surface (at depth of 6 nm and about 40 times greater than the silver concentration in the sol), the synthesized Ag-SiO2 thin film (with area of 10 mm2) presented strong antibacterial activities against E. coli and S. aureus bacteria with relative rate of reduction of the viable bacteria of 1.05 and 0.73 h-1 for initial... 

In this research, an attempt was made to investigate the potential of nanophotocatalysts for treatment of hazardous wastewater streams. Titanium dioxide nanoparticles (as photocatalyst) were immobilized on a porous and low-density support called "perlite" using a very simple and inexpensive method. TiO2-coated perlite granules were used in a "Floating-bed photoreactor" to study the photocatalytic purification process of a typical wastewater polluted by furfural. The effects of initial concentration, catalyst mass/solution volume ratio, oxidant molar flow, residence time, and light intensity on process removal efficiency, and kinetics of the reactions were studied. SEM analyses showed a... 

Application of immobilized horseradish peroxidase (HRP) in porous calcium alginate (ca-alginate) for the purpose of phenol removal is reported. The optimal conditions for immobilization of HRP in ca-alginate were identified. Gelation (encapsulation) was optimized at 1.0% (w/v) sodium alginate in the presence of 5.5% (w/v) of calcium chloride. Upon immobilization, pH profile of enzyme activity changes as it shows higher value at basic and acidic solution. Increasing initial phenol concentration results in a decrease in % conversion. The highest conversion belongs to phenol concentration of 2 mM. Investigation into time course of phenol removal for both encapsulated and free enzymes showed... 

Superparamagnetic iron oxide nanoparticles (SPION) are being increasingly used in various biomedical applications such as hyperthermia, cell and protein separation, enhancing resolution of magnetic resonance imaging, and drug delivery. However, the toxicity data for SPION are limited. In this study, uncoated and single polyvinyl alcohol coated SPION with high chemical reactivity (due to the bigger surface area) were synthesized using a coprecipitation method. Cytotoxicity of these magnetic nanoparticles and their ability to cause arrest in cell life-cycles was investigated. Interaction of these nanoparticles with adhesive mouse fibroblast cell line (L929) was probed using MTT assay. High... 

A novel full-polysaccharide hydrogel was prepared by crosslinking of chitosan with periodate-oxidized sucrose. A tetraaldehyde molecule is synthesized via periodate oxidation of sucrose and then applied as a crosslinking agent to form a new hydrogel network. A mechanism for the superabsorbent hydrogel formation via reductive N-alkylation was also suggested. The structure of the hydrogel was confirmed by FTIR spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). It is shown that crosslinking of chitosan can improve its thermal stability. The effects of crosslinker concentration, pH, and inorganic salt on the swelling behavior of the hydrogel were studied. The... 

A model for prediction of corrosion of mild steel in aqueous solutions containing carbon dioxide is proposed. In this model, formation of protective corrosion product is not yet considered, species concentration at the surface was calculated by using molecular diffusion phenomena and the diffusion equations were solved using the finite difference method. Calculated electrochemical currents at the steel surface may be used to determine the corrosion rate. The model was verified experimentally under atmospheric pressure and the effect of parameters, such as liquid velocity and pH, was investigated. The model can predict the electrochemical reaction rates when they were controlled by diffusion... 

A three-dimensional multi-component transport model in a two-phase oil-water system was developed. The model includes separated terms to account for the dispersion, convection, injection, growth and death of microbes, and accumulation. For the first time, effects of both wettability alteration of reservoir rock from oil wet to water wet and reduction in interfacial tension (IFT) simultaneously on relative permeability and capillary pressure curves were included in a MEOR simulation model. Transport equations were considered for the bacteria, nutrients, and metabolite (bio-surfactant) in the matrix, reduced interfacial tension on phase trapping, surfactant and polymer adsorption, and effect... 

The fault-tolerant capability is a prerequisite for electrical safety-critical applications. In this regard, multi-phase induction motors are well-known actuators used to provide this feature. Compared to conventional three-phase machines with distributed windings, induction machines having concentrated windings could be more fault-tolerant because of increasing the number of phases. In addition, concentrated windings have shorter end-winding and less required copper weight which makes it a lower cost solution compared to distributed windings. However, concentrated windings adversely increase the distortion of the air gap flux density which affects motor performances. In this paper, a... 

A headspace adsorptive microextraction technique was developed using a novel polyaniline-nylon-6 (PANI-N6) nanofiber sheet, fabricated by electrospinning. The homogeneity and the porosity of the prepared PANI-N6 sheet were studied using the scanning electron microscopy (SEM) and nanofibers diameters were found to be around 200nm. The novel nanofiber sheet was examined as an extracting medium to isolate some selected chlorobenzenes (CBs), as model compounds, from aquatic media. The extracted analytes were desorbed using μL-amounts of solvent and eventually an aliquot of extractant was injected into gas chromatography-mass spectrometry (GC-MS). Various parameters affecting the extraction and... 

In this research, the effect of applied voltage and electrolyte concentration on structure, chemical composition, optical properties, and especially photo-catalytic activity of the TiO2 layers containing micro/nano-sized pores are discussed. TiO2 layers were synthesized by micro arc oxidation (MAO) process using different electrolyte concentrations and applied voltages. Surface structure of the layers was studied by scanning electron microscope (SEM); furthermore, energy dispersive spectrophotometry (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques were employed to determine phase structure and chemical composition of the layers. Photo-activity of the... 

Gold-silver alloy nanoparticles with various Au concentrations in sputtered SiO2 thin films were synthesized by using RF reactive magnetron co-sputtering and then heat-treated in reducing Ar + H2 atmosphere at different temperatures. The UV-visible absorption spectra of the bimetallic systems confirmed the formation of alloy nanoparticles. The optical absorption of the Au-Ag alloy nanoparticles exhibited only one plasmon resonance absorption peak located at 450 nm between the absorption bands of pure Au and Ag nanoparticles at 400 and 520 nm, respectively, for the thin films annealed at 800 °C. The maximum absorption wavelength of the surface plasmon band showed a red shift with increasing...