Sharif Digital Repository

Background: Patients who have shoulder pain usually have compensatory or contributory deviation of shoulder motion during arm elevation. In the traditional scapulohumeral rhythm, the share of the acromioclavicular (AC) and the sternoclavicular (SC) joint movements and also the role of AC internal rotation angle are unknown. Objectives: The main purpose of this study was to measure and compare the segmentary scapulohumeral rhythm (SSHR) during scapular arm elevation at a steady rotational speed in athletes with and without impingement syndrome. Patients and Methods: Using a speedometer, the maximum speed of arm elevation was measured in 21 men in each of the involved and uninvolved groups.... 

In this study, the nonlinear partial differential equations governing two phase flow through porous media are solved using two different methods, namely, finite difference and finite element. The capillary pressure term is considered in the mathematical model. The numerical results on a 2-D test case are then compared with the experimental drainage process and water flooding performed on a glass type micromodel. Based on the obtained results, finite difference technique needs less computational time for solving governing equations of two phase flow, but findings of this method show less agreement with the experimental data. The finite element scheme was found to be more adequate and its... 

In the present work, the multiscale finite volume (MsFV) method is implemented on a new coarse grids arrangement. Like grids used in the MsFV methods, the new grid arrangement consists of both coarse and dual coarse grids but here each coarse block in the MsFV method is a dual coarse block and vice versa. Due to using the altered coarse grids, implementation, computational cost, and the reconstruction step differ from the original version of MsFV method. Two reconstruction procedures are proposed and their performances are compared with each other. For a wide range of 2-D and 3-D problem sizes and coarsening ratios, the computational costs of the MsFV methods are investigated. Furthermore, a... 

Five different approaches are presented to assign characteristic ratios for commensurate fractional order systems having order in (0,0.5]. Through the indirect methods, a closed-loop or plant transfer function is converted to a commensurate order one with an order greater than 0.5 so that the previously designed CRA method by the authors is applicable. The first method among the proposed direct ones is based on increasing the order of the desired closed-loop transfer function that allows the employment of positive characteristic ratios. In the second method the closed-loop response is sped up by augmenting an appropriate zero. The final method uses negative characteristic ratios to reach the... 

In this paper, a two-link flexible manipulator is considered. For a prescribed motion, Timoshenko and Euler-Bernoulli beam models are considered. Using the Galerkin method, nonlinear equations of motion are solved. The Runge-Kutta method is employed for the time response integration method. A comparative study is made between the Euler-Bernoulli and Timoshenko beam models, with and without foreshortening effects. It is demonstrated that for two-link manipulators, both theories provide good models, and the results for both theories are very similar for all ranges of slenderness ratio. The findings suggest that for two-link manipulators with relatively high slenderness ratios, there is a... 

This study aims at quantitatively assessing the availability indices of various substation automation systems. In order to illustrate the proposed technique, first, nine types of substation automation architectures are reviewed. The reliability block diagrams of various substation automation architectures are then developed. Subsequently, comparative studies are performed to demonstrate the most reliable architectures in comparison with the others. The results obtained by the proposed approach show the impact of repair on availability indices of the automation system. Finally, different sensitivity analyses are conducted for all architectures, where the impact of varying availability of all... 

This paper studies a number of well-known noise estimation techniques and provides a comparative performance analysis of them in speech enhancement platform. Two types of evaluation data that simulate consistent and inconsistent noisy conditions are prepared in the presence of six noise types at different SNR levels. The performance of speech enhancement systems and the spectrum distance of the estimated and original noise spectrums are used as evaluation criteria. The evaluations indicate that a simple VAD method outperforms noise estimation methods in most of the consistent noisy conditions  

In this work, a series of solvent- and water-injection scenarios were conducted on horizontal five-spot glass micromodels that were saturated initially with heavy oil. Sandstone and limestone rock look-alike and network patterns with different pore structures were used in the experiments. The results show that the ultimate oil recovery of a water-alternating-solvent (WAS) scheme was greater than that of a simultaneously water-alternating-solvent (SWAS) scheme, and the efficiency of a solvent-soak scheme also offers a greater recovery. Likewise, the WAS scheme resulted in greater oil recovery when compared with continuous solvent injection (CSI), with the same amount of solvent consumption.... 

Electrodes made of group VIII and IB metals were examined for their redox process and electrocatalytic activities towards the oxidation of ethylene glycol in alkaline solutions. The method of cyclic voltammetery (CV) and Open circuit potentials measurement (OCP) was employed. It is found that considerable electrooxidation current are observed for silver and copper but lower anodic overpotential for oxidation is obtained for gold and platinum. Oxide layer produced on the surface of all electrodes in alkaline solution under anodic scan participates in ethylene glycol electrooxidation. Oxidation current observed in the reverse scans for platinum and gold are higher than those observed in... 

Background: Titanium (Ti) implants are commonly coated with hydroxyapatite (HA). However, HA has some disadvantages such as brittleness, low tensile strength and fracture toughness. It is desirable to combine the excellent mechanical properties of ZrO 2 and the chemical inertness of Al 2O 3 with respect to the purpose of this project which was coating Ti implants with HA-ZrO 2-Al 2O 3 to modify the surface of these implants by adding ZrO 2 and Al 2O 3 to HA. The purpose of this study was to evaluate the efficacy of hydroxyapatite coating nonocomposite. Methods: From September 2009 to January2011, functionally graded HA-Al 2O 3-ZrO 2 and HA coatings were applied on Ti samples. HA-Al 2O 3-ZrO... 

Control charts are the best tools to monitor main process parameters, and the Multivariate Exponentially Weighted Moving Average, MEWMA, type of this tool is used when there are several correlated quality characteristics to be monitored simultaneously where detecting small deviations of the characteristics is desired. In this paper, the models of both the economic and the economic-statistical design problems of MEWMA control charts are solved by a Particle Swarm Optimization (PSO) approach. The comparison study between the economic and the economic-statistical designs shows better statistical performances of the economic-statistical design with negligible increase in cost. Furthermore, in... 

In speech production systems, the vocal tract is modeled by a filter and glottal pulse by an excitation signal. In most traditional systems impulse train or noise is used as the excitation. In this paper the effects of different excitation signals on Mel-generalized cepstral filters (LPC, warped LPC, mel cepstral and ML cepstral) are studied. Excitation signals with different pulse shapes are used. Furthermore, based on voicing power, noise factor is added to the excitation signals. Totally 600 different experiments with different filter types, number of coefficients, pulse shapes, pulse widths and noise power are preformed. Synthesized speech is evaluated by PESQ measure. A number of pulse... 

Process variation has already emerged as a major concern in design of multi-processor system on chips (MPSoC). In recent years, there have been several attempts to bring variability awareness into the task scheduling process of embedded MPSoCs to improve performance yield. This study attempts to provide a comparative study of the current variation-aware design-time task and communication scheduling techniques that target embedded MPSoCs. To this end, the authors first use a sign-off variability modelling framework to accurately estimate the frequency distribution of MPSoC components. The task scheduling methods are then compared in terms of both the quality of the final solution and the... 

Network tools have been extensively applied to study the properties of brain functional and anatomical networks. In this paper, resiliency of Caenorhabditis elegans cortical networks against cascaded failures is studied. To this end, directed network formed by chemical connections and undirected network formed by electrical couplings through gap junctions are considered. Furthermore, two types of C. elegans networks are studied: the whole cortical network of the hermaphrodite type and the network of the posterior cortex in male C. elegans. The results show that resiliency of hermaphrodite and male networks is different. The male cortical network of chemical synapses shows extensively weaker... 

For a power transfer path, total transfer capability (TTC) represents maximum power that can be transferred over the transmission system. Unified power flow controller (UPFC) is a device that can be used to increase in TTC. This study presents a new method for optimal UPFC application to minimise power loss while enhancing TTC. Based on UPFC injection model, the solution region of UPFC parameters is first found using the proposed method to maximise TTC. It then searches the solution region to find optimal UPFC control mode and setting to minimise system power loss. The proposed method is applied to the IEEE-Reliability Test System and the UPFC application impact are evaluated. Comparative... 

In this paper, we present a new adaptive contourlet-based steganography method that hides secret data in a specific or automatically selected cover image. Our proposed steganography method primarily decomposes the cover image by contourlet transform. Then, every bit of secret data is embedded by increasing or decreasing the value of one coefficient in a block of a contourlet subband. Contourlet coefficients are manipulated relative to their magnitudes to hide the secret data adaptively. In addition to proposing contourlet-based steganography method, this work investigates the effect of cover selection on steganography embedding and steganalysis results. We demonstrate, through the... 

This paper proposes for wind turbines (WTs) an analytical reliability method, used on other engineering systems, to compare the reliability of different turbine concepts. The main focus of the paper is to compare the reliability of geared generator and direct-drive concept WTs. Modification methods are also recommended for improving the availability of WTs and geared generator concept incorporating doubly fed induction generator  

There are many approaches to fabricate nanoparticles reinforced aluminum matrix composites. However, uniform distribution of nanoparticle within aluminum matrix remains a difficult challenge. In this study, a novel method is used by taking the advantages from squeeze casting of semi-solid aluminum slurry combined with electromagnetic field to refine the microstructure of the primary Al and eutectic Si phase, plus to obtain uniform distribution nano alumina particles in the aluminum matrix. It is noted that electromagnetic field plays an important role in the formation of non-dendritic primary α-Al particles and a great microstructure refinement occurs as a consequence of the pressure... 

As a high proportion of the total generated electricity energy and the power system costs is due to the power losses in lines, allocating the loss and associated cost to the system loads and generating units is a substantial issue in deregulated power systems. The procedure to accomplish this cost allocation is designated as 'loss cost allocation' (LCA). So far, a number of LCA methods have been proposed for transmission networks. A few papers have compared different loss allocation methods, which are the methods which calculate the loss (and not necessarily the loss cost) allocated to the loads and generating units. However, this paper presents a comparative study of LCA methods. In this...