Sharif Digital Repository

This paper presents recent developments on effects of rest and fatigue loading on properties of healthy vertebra discs. A comparison of different approaches used in literature to study the properties of intervertebral disc is presented. The major achievements in this area so far are discussed in the context of their advantages and disadvantages. The past approaches are based on bio-mechanical models which mostly used statistical techniques for the analysis and estimation of fatigue loaded Intervertebral Disc (IVD). However, those modeling techniques were not flexible enough for analysis of customized tests. In this paper, we applied System Identification (SI) based NLARX modeling technique... 

A very important part of the living cells of biological systems is the lipid membrane. The mechanical properties of this membrane play an important role in biophysical studies. Investigation as to how the insertion of additional phospholipids in one leaflet of a bilayer affects the physical properties of the obtained asymmetric lipid membrane is of recent practical interest. In this work a coarse-grained molecular dynamics simulation was carried out in order to compute the pressure tensor, the lateral pressure, the surface tension and the first moment of lateral pressure in each leaflet of such a bilayer. Our simulations indicate that adding more phospholipids into one monolayer results in... 

Understanding the relationship between different kinds of mechanical loading and the failure of the intervertebral disc is difficult to study in vivo and in vitro. Through finite element studies some of these issues may be overcome enabling more detailed assessment of the biomechanical behavior of the intervertebral disc. The objective of this paper is to develop a nonlinear axisymmetric poroelastic finite element model of intervertebral disc and show its capability for studying the time-dependent response of disc. After comparison of the response of different models in quasi-static analysis, the poroelastic model of intervertebral disc is presented and the results of a short-term and... 

According to recent researches, angle shear connectors are appropriate to transfer longitudinal shear forces across the steel-concrete interface. Angle steel profile has been used in different positions as L-shaped or C-shaped shear connectors. The application of angle shear connectors in tilted positions is of interest in this study. This study investigates the behaviour of tilted-shaped angle shear connectors under monotonic loading using experimental push out tests. Eight push-out specimens are tested to investigate the effects of different angle parameters on the ultimate load capacity of connectors. Two different tilted angles of 112.5 and 135 degrees between the angle leg and steel... 

Different lifting analysis tools are commonly used to assess spinal loads and risk of injury. Distinct musculoskeletal models with various degrees of accuracy are employed in these tools affecting thus their relative accuracy in practical applications. The present study aims to compare predictions of six tools (HCBCF, LSBM, 3DSSPP, AnyBody, simple polynomial, and regression models) for the L4-L5 and L5-S1 compression and shear loads in twenty-six static activities with and without hand load. Significantly different spinal loads but relatively similar patterns for the compression (R2>0.87) were computed. Regression models and AnyBody predicted intradiscal pressures in closer agreement with... 

A central problem in motor control is to understand how the many biomechanical degrees of freedom are coordinated to achieve a goal. A common assumption is that Central Nervous System (CNS) would minimize a performance index to achieve this goal which is called objective function. In this paper, two popular objective functions are utilized to design the optimal trajectory of trunk movements. A 3D computational method incorporated with 18 anatomically oriented muscles is used to simulate human trunk system. Inverse dynamics allows us to compute torque which is generated around Lumbosacral joint. This torque is divided among muscles by static stability-based optimization. Trunk movement from... 

The human motor system is organized for execution of various motor tasks in a different and flexible manner. The kinetic redundancy in the human musculoskeletal system is a significant property by which the central nervous system achieves many complementary goals. An equilibrium-based biomechanical model of isometric three-dimensional exertions of trunk muscles has been developed. Following the definition and role of the uncontrolled manifold, the kinetic redundancy concept is explored in mathematical terms. The null space of the kinetically redundant system when a certain joint moment and/or stiffness are needed is derived and discussed. The aforementioned concepts have been illustrated,... 

A novel optimisation algorithm is developed to predict coactivity of abdominal muscles while accounting for both trunk stability via the lowest buckling load (Pcr) and tissue loading via the axial compression (Fc). A nonlinear multi-joint kinematics-driven model of the spine along with the response surface methodology are used to establish empirical expressions for Pcr and Fc as functions of abdominal muscle coactivities and external load magnitude during lifting in upright standing posture. A two-component objective function involving Fc and Pcr is defined. Due to opposite demands, abdominal coactivities that simultaneously maximise Pcr and minimise Fc cannot exist. Optimal solutions are... 

Hydrogels have been recognized as crucial biomaterials in the field of tissue engineering, regenerative medicine, and drug delivery applications due to their specific characteristics. These biomaterials benefit from retaining a large amount of water, effective mass transfer, similarity to natural tissues and the ability to form different shapes. However, having relatively poor mechanical properties is a limiting factor associated with hydrogel biomaterials. Controlling the biomechanical properties of hydrogels is of paramount importance. In this work, firstly, mechanical characteristics of hydrogels and methods employed for characterizing these properties are explored. Subsequently, the most... 

Evaluation of spinal range of motions (RoMs) and movement coordination between its segments (thorax, lumbar, and pelvis) has clinical and biomechanical implications. Previous studies have not recorded three-dimensional primary/coupled motions of all spinal segments simultaneously. Moreover, magnitude/direction of the coupled motions of the thorax/pelvis in standing posture and lumbopelvic rhythms in the frontal/transverse planes have not been investigated. This study, hence, used an inertial tracking device to measure T1, T5, T12, total (T1-T12) thoracic, lower (T5-T12) and upper (T1-T5) thoracic, lumbar (T12-S1), and pelvis primary and coupled RoMs as well as their movement coordination in... 

In this present research work, a new configuration of the hybrid magnetorheological (MR) brake via T-shaped drum with an arc form surface boundary - the biomechanical geometric design of the hybrid MR brake as a prosthetic knee - is discussed and experimentally tested. The main purpose of this study is to develop a prosthetic knee with one rotary disc to fulfill the desired objective. To achieve this, three steps are considered. In the first step, to model the brake, slab method modeling is used to calculate the braking torque due to the arc surface. In the second step, the biomechanical geometric design is adjusted as an optimization problem to maximize the braking torque, minimize the... 

Accurate estimation of muscle forces in various occupational tasks is critical for a reliable evaluation of spinal loads and subsequent assessment of risk of injury and management of back disorders. The majority of biomechanical models of multi-segmental spine estimate muscle forces and spinal loads based on the balance of net moments at a single level with no consideration for the equilibrium at remaining levels. This work aimed to quantify the extent of equilibrium violation and alterations in estimations when such models are performed at different levels. Results are compared with those of kinematics-driven model that satisfies equilibrium at all levels and EMG data. Regardless of the... 

The effects of external resistance on the recruitment of trunk muscles and the role of intrinsic and reflexive mechanisms to ensure the spinal stability are significant issues in spinal biomechanics. A computational model of spine under the control of 48 anatomically oriented muscle actions was used to simulate iso-resistive trunk movements. Neural excitation of muscles was attained based on inverse dynamics approach along with the stability-based optimization. The effect of muscle spindle reflex response on the trunk movement stability was evaluated upon the application of a perturbation moment. In this study, the trunk extension movement at various resistance levels while extending from... 

In this paper a complete design of a high speed optical human motion tracking system has been described for biomechanical human motion analysis and animation craft applications. The main core of the image processing unit that is implemented by the differential algorithm procedure and some intelligent and conservative procedures that facilitate the search algorithm have also been proposed and implemented for the processing of human motions tracking images. In the next step an optimized modified direct linear transformation (MDLT) method has been used to reconstruct 3D locations of markers as an input data for animation unit. The low computational cost and the high precision in detecting and... 

The change of gait pattern and muscular activity following amputation is thought to be responsible for the higher incidence of joint degenerative disorders observed in amputees. Considering the lack of consistent data in the literature, the purpose of the present study was to measure and analyze the spatio-temporal variables, the kinematics and, particularly, the net joint moments of the intact and prosthetic limbs of above knee amputee subjects during walking and to compare the results with those of normals. The gait characteristics of five transfemoral amputees and five normal subjects were measured using videography and a force platform. The human body was modeled as a 2-D sagittal plane... 

Calcium titanate-CaTiO3 (perovskite) has been used in various industrial applications due to its dopant/doping mechanisms. Manipulation of defective grain boundaries in the structure of perovskite is essential to maximize mechanical properties and stability; therefore, the structure of perovskite has attracted attention, because without fully understanding the perovskite structure and diffracted planes, dopant/doping mechanisms cannot be understood. In this study, the areas and locations of atoms and diffracted planes were designed and investigated. In this research, the relationship between Young’s modulus and planar density of unit cell, super cells (2 × 2 × 2) and symmetry cells of nano... 

A large number of people are exposed to whole body vibration in their occupational life. Measuring vibration is an important tool in rehabilitation and biomechanical fields of research. We have proposed image processing as a new method to record and determine the frequency response of human body. The arranged set up for forced vibration consisted of an AC motor, a variable speed drive unit and a shaking table for producing one directional sinusoidal vibration. Volunteers were asked to stand on the shaking table at a relaxed posture. Two digital camcorders were used to capture the motion of colored pencil-dot markers on the skin of human body (forehead) and on the edge of the shaking table.... 

A safe rehabilitation exercise for anterior cruciate ligament (ACL) injuries needs to be compatible with the normal knee arthrokinematics to avoid abnormal loading on the joint structures. The objective of this study was to measure the amount of the anterior tibial translation (ATT) of the ACL-deficient knees during selective open and closed kinetic chain exercises. The intact and injured knees of fourteen male subjects with unilateral ACL injury were imaged using uniplanar fluoroscopy, while the subjects performed forward lunge and unloaded/loaded open kinetic knee extension exercises. The ATTs were measured from fluoroscopic images, as the distance between the tibial and femoral reference... 

In this study, a nonlinear poroelastic model of intervertebral disc as an infrastructure was developed. Moreover, a new element was defined consisting a disc (Viscoelastic Euler Beam Element) and a vertebra (Rigid Link) as a unit element. Using the new element, three different viscoelastic finite element models were prepared for lumbar motion segment (L4/L5). Prolonged loading (short-term and long-term creep) and cyclic loading were applied to the models and the results were compared with results of in vivo tests. Simplification of the models by using the new element leads to reduction of the runtime of the models in dynamic analyses to few minutes without losing the accuracy in the results