Sharif Digital Repository

This study focuses on a forward looking approach in which deep eutectic solvents (DESs), a new class of designer solvents, were impregnated into micro porous polyvinylidene fluoride (PVDF) membrane for the separation of CO2 from CH4. Three types of DESs were prepared by mixing and heating of hydrogen bond acceptor (choline chloride) with either malic acid, tartaric acid or oxalic acid as hydrogen bond donor. The Fourier transform infrared spectroscopy confirmed the hydrogen bond interactions in the resulting DES. Thermal gravimetric analysis (TGA) was used to evaluate the thermal stability of the prepared membranes. The DES based supported liquid membranes were investigated systematically to... 

This paper focuses on characterization of intervertebral disc behavior upon fatigue stress. It consists in in-vitro experiments to measure intervertebral disc deformation with regard to forces applied to produce fatigues test. In this paper, a system modeling based non-invasive method to assess back pain is proposed which may be used for designing of prediction model to predict the failure of intervertebral disc (IVD) experiencing fatigue loading. An artificial compression fracture was simulated in the lower level of vertebra followed by a poly(methyl methacrylate) (PMMA) bone cement injection. Fatigue loading was applied on the specimens and the load was incrementally increased form 650 N... 

Novel PVA/PEG cross-linked membranes were prepared with (0–20 wt. %) of silica nanoparticles. The presence of both the polymers and additive was confirmed by FTIR analysis. The thermal properties of the membranes were analyzed by TGA and DSC analysis. The morphological and mechanical properties of the membranes were studied by SEM analysis and tensile testing, respectively. The gas permeation performances of the membranes were examined using state-of-the-art gas permeability cell. It was found that permeability of all the gases increased with the increase of silica loading, whereas ideal selectivity of carbon dioxide with respect to nitrogen and methane increased up to 10 wt. % loading and... 

Pr and Co co-doped BiFeO3 multiferroics of the following composition BiCoxPrxFe1-2xO3, where (x = 0.00, 0.05, 0.10, 0.15, 0.20 and 0.25) were prepared via sol-gel route. XRD, FTIR, SEM, VSM and VNA were used to evaluate the structural, phase, morphological and electromagnetic properties of Pr and Co co-doped multiferroics. All the undoped and Pr–Co co-doped multiferroics were of single rhombohedral phased whereas at higher concentration the orthorhombic structure was present. FTIR analysis exhibited the presence of orthorhombic phase. SEM images revealed that the grains of Pr and Co doped multiferroics are circular and elliptical in shape. Dielectric and electromagnetic properties were... 

Pr and Co co-doped BiFeO3 multiferroics of the following composition BiCoxPrxFe1-2xO3, where (x = 0.00, 0.05, 0.10, 0.15, 0.20 and 0.25) were prepared via sol-gel route. XRD, FTIR, SEM, VSM and VNA were used to evaluate the structural, phase, morphological and electromagnetic properties of Pr and Co co-doped multiferroics. All the undoped and Pr–Co co-doped multiferroics were of single rhombohedral phased whereas at higher concentration the orthorhombic structure was present. FTIR analysis exhibited the presence of orthorhombic phase. SEM images revealed that the grains of Pr and Co doped multiferroics are circular and elliptical in shape. Dielectric and electromagnetic properties were... 

The recent work investigates the heat transfer attributes in the flow of engine oil which comprises of nano-particles such as Cu and TiO2. The performance of Copper and Titanium oxide is over looked in the flow of engine oil. The energy equation is amended by the features of thermal radiation, viscous dissipation, and heat generation. The mathematical model signifies the porosity, entropy generation and moving flat horizontal surface with the non-uniform stretching velocity. Quasi-linearization, which is a persuasive numerical technique to solve the complex coupled differential equations, is used to acquire the numerical solution of the problem. Flow and heat transfer aspects of Cu–TiO2 in... 

Providing home hemodialysis (HHD) therapy is a complex process that not only requires the use of a complex technology but also involves a diverse group of stakeholders, and each stakeholder has their requirements and may not share a common interest. Bringing them together will require the alignment of their interests. A process management perspective can help to accomplish the alignment of their interests. To align their interests, it is crucial to identify interest groups and understand their interests. The main objective of this paper is to identify the stakeholders and represents their interests as a list of requirements in the HHD process. An extensive literature review has been carried... 

Betaine-based natural deep eutectic solvents (NADESs), a new class of green solvents, were immobilized into a porous polyvinylidene fluoride (PVDF) support and evaluated for the separation of CO2 from CO2/N2 and CO2/CH4 mixtures. Two types of NADESs were synthesized by mixing betaine (hydrogen bond acceptor-HBA) with malic acid and tartaric acid (hydrogen bond donors-HBD) respectively. FTIR and Raman spectroscopy were studied to confirm the synthesis and purity of the NADESs. The thermal strength of the NADESs was investigated using thermogravimetric analysis. The gas permeation results of the fabricated NADES-based-supported liquid membranes (NADES-SLMs) showed that the permeability of CO2... 

The high temperature superconductor thin films Cu1-xTl xBa2Ca3Cu4O12-δ (Cu1-xTlx- 1234) are post-annealed in a nitrogen atmosphere. The zero-resistivity critical temperature (Tc(R ≤ 0)) of these thin films is increased from 92.3 to 104K. The grain size is enhanced and their morphology is improved with the post-annealing. The enlargement of grain size is linked to fluctuation-induced conductivity (FIC) in the light of Aslamazov-Larkin (AL) theory. The FIC measurements have shown that the cross-over of three-dimensional (3D) to two-dimensional (2D) behaviour of fluctuations is shifted to higher temperature values with an increase of post-annealing temperature. These results have shown that the... 

Ca-doped Ni–Mg–Mn spinel ferrites with compositions of Ni0·5Mg0·3Mn0.2CaxFe2-xO4 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) were prepared via sol-gel auto-ignition technique. TGA/DTA, FTIR, XRD, FESEM, and VSM were employed to evaluate the thermal, spectral, structural, morphological, and magnetic features of Ca-doped Ni–Mg–Mn spinel ferrites. TGA/DTA curves show the weight loss in the sample. This weight loss was attributed to the oxidation and decomposition of the sample contents at a temperature of 500 °C. XRD reveals a single-phase structure of the Ni–Mg–Mn nano ferrites. A single-phase orthorhombic structure was confirmed for Ca-doped Ni–Mg–Mn ferrites. Structural parameters such as lattice... 

An energy management system (EMS) was proposed for a campus microgrid (μG) with the incorporation of renewable energy resources to reduce the operational expenses and costs. Many uncertainties have created problems for microgrids that limit the generation of photovoltaics, causing an upsurge in the energy market prices, where regulating the voltage or frequency is a challenging task among several microgrid systems, and in the present era, it is an extremely important research area. This type of difficulty may be mitigated in the distribution system by utilizing the optimal demand response (DR) planning strategy and a distributed generator (DG). The goal of this article was to present a... 

The X-ray photoemission (XPS) measurements of Cu1-xTlxBa2Ca2 Cu3-yZnyO10-δ (y = 0, 2.65) superconductors have been performed and compared. These studies revealed that the charge state of thallium in the Cu0.5Tl0.5Ba2O4-δ charge reservoir layer in Zn doped samples is Tl1+, while it is a mix of Tl1+ and Tl2+ in Zn free samples. The binding energy of Ba atoms in the Zn doped samples is shifted to higher energy, which when considered along with the presence of Tl1+ suggested that it more efficiently directed the carriers to ZnO2 and CuO2 planes. The evidence of improved inter-plane coupling witnessed in X-ray diffraction is also confirmed by XPS measurements of Ca atoms in the Zn doped samples.... 

X-ray photo-emission spectroscopy (XPS) studies of Cu1-xTlxBa2Ca3Cu4 O12-y superconductor thin films have been carried out for understanding the mechanism of superconductivity and to find out the reasons for the increase of zero resistivity critical temperature Tc(R = 0) with post-annealing in a nitrogen atmosphere. It is observed from these studies that reduction of charge state of thallium is a source of doping of carriers to the CuO2 planes. The reduced charge state of thallium (i.e. Tl1+) promotes lower oxygen concentration in the charge reservoir layer, which possibly results in movement of electrons to the conducting CuO2 planes. The higher density of electrons in the CuO2 planes... 

This article focuses on the study of potassium carbonate (PC) based deep eutectic solvents based supported liquid membranes (DES-SLMs) for CO2 separation. Two types of DESs were synthesized by mixing and subsequently heating PC with glycerol or ethylene glycol separately. The mechanism of interaction was inferred from the spectral analysis (FTIR) whereas thermal study (TGA) was performed to analyze the stability of the membrane. Experiments were carried out to analyze the permeability and separation factor of the membranes. The PC-Glycerol based SLM reported permeability of 34 Barrer and ideal selectivity of 59 while PC-Ethylene Glycol based SLM showed permeability of 20 Barrer and... 

This study demonstrates a new strategy in which deep eutectic solvents (DES), a new class of sustainable organic solvents, were impregnated into micro porous polymer support for separation of CO2 from CH4. Three different types of DESs were prepared by mixing and subsequent heating of betaine as hydrogen bond acceptor (HBA) in combination with either glycerol (G), ethylene glycol (EG) or urea (U) as hydrogen bond donors (HBD) in 1:3 stoichiometric mole ratio. The Fourier transform infrared (FTIR) spectroscopy was performed to confirm the formation of DESs. The gas permeation results showed that permeability of CO2 increased from 31.23 to 35.67 Barrer on substitution of HBD from glycerol to... 

X-ray photoemission spectroscopy (XPS) of Cu1-xTl xBa2Ca2Cu3O10-δ (Cu1-xTlx-1223) superconductors thin films is studied. These films were prepared by amorphous phase epitaxy method on the SrTiO 3 substrate. This compound has Cu1-xTlxBa 2O4-δ charge reservoir layer and three CuO 2 planes. The atoms in the CuO2 planes have strong covalent bonding, while the some of the atoms in Cu1-xTl xBa2O4-δ charge reservoir, such as oxygen (Oδ) have predominantly secondary bonding and could be removed from the unit cell. The deliberate or inadvertent removal of the oxygen from the unit cell may change the charge state of the constituent atoms in the charge reservoir layer. The charge state of the atoms in... 

Copper (Cu) substituted Co–]Ce nanoferrites with nominal composition of Co 1-x Cu x Ce 0.05 Fe 1.95 O 4 (x = 0.00, 0.25, 0.50, 0.75, 1.00) were prepared by sol-gel route. The sintering of the Cu doped Co–]Ce nanoferrites was done at 700 °C to investigate the desired properties of the Cu doped Co–]Ce nanoferrites. The combination of transition metal (Cu) and rare earth (Ce) were employed to tailor the characteristics of the spinel ferrites. The constant ratio of rare earth and systematic doping of Cu in Co ferrite was incorporated to see the effects of these ions in spinel ferrite. FTIR, FESEM, XRD and VSM were used to study the vibrational bands, phase, morphology, structure and magnetic... 

NiZn nanoferrites doped with rare-earth cations having stoichiometric composition such as Ni0.5Zn0.5R0.02Fe1.98O4 (R = Tb, Pr, Ce, Gd, Y) were prepared by sol–gel technique. The same amount of Ni and Zn with constant ratio of different rare-earths ions were doped to investigate the variations in the properties. X-ray diffraction (XRD), Field emission electron microscope (FESEM), and vibrating sample magnetometer (VSM) were used to investigate the structure, morphology, and magnetic properties of rare-earth doped NiZn nanoferrites, respectively. X-ray density, bulk density, and porosity were also calculated. Phase, crystallite size, structure, d-spacing, lattice parameter, micro strain, and... 

NiZn nanoferrites doped with rare-earth cations having stoichiometric composition such as Ni0.5Zn0.5R0.02Fe1.98O4 (R = Tb, Pr, Ce, Gd, Y) were prepared by sol–gel technique. The same amount of Ni and Zn with constant ratio of different rare-earths ions were doped to investigate the variations in the properties. X-ray diffraction (XRD), Field emission electron microscope (FESEM), and vibrating sample magnetometer (VSM) were used to investigate the structure, morphology, and magnetic properties of rare-earth doped NiZn nanoferrites, respectively. X-ray density, bulk density, and porosity were also calculated. Phase, crystallite size, structure, d-spacing, lattice parameter, micro strain, and... 

The features of heat transferral capability between metallic (Cu) and non-metallic (TiO2) nanoparticles suspended in the engine-oil (EO) third-grade base-liquid has been analysed under the influence of strong magnetic field. The numerical investigation of system of coupled differential equations for third-grade nanofluid flow model is accomplished via Quasi-linearization method (QLM). The stretching horizontal sheet is heated through convective heat process assuming the special effects of thermal radiation, joule heating, heat generation and viscous dissipation in the energy equation. The mass suction and slip velocity at the boundary of the sheet has been taken into account to enhance...