Sharif Digital Repository

For steel industries optimum operation with high efficiency is of the first importance. On the other hand, extra investments in the supply side of electric arc furnaces may have been seen as redundant cost. Therefore, to improve the system efficiency, devices such as SVCs or STATCOMs can be employed. In this paper, the benefits of dynamic shunt reactive compensation by SVCs in steel industries are investigated. It is shown that this operation leads to optimization in steel production process and is completely beneficial from economic point of view. Supply system of a typical arc furnace is simulated using MATLAB software and the effects of a compensator on the operating characteristics of an... 

Developing efficient and appropriate modeling and control techniques for DC-DC converters is of major importance in power electronics area and has attracted much attention from automatic control theory. Since DC-DC converters have a complex hybrid nature, recently several techniques based on hybrid modeling and control have been introduced. These techniques have shown better results as compared with conventional averaging-based schemes with limited modeling and control abilities. But the current works in this field have not considered all possible dynamics of the converters in both continuous and discontinuous current modes (CCM, DCM) of operations. These dynamics are results of controlled... 

Several attempts have been made to design suitable controllers for DC-DC converters. However, these designs suffer from model inaccuracy or their inability to desirably function in both continuous and discontinuous current modes. This paper presents a novel switching scheme based on hybrid modeling to control a buck converter using mixed logical dynamical (MLD) methodologies. The proposed method is capable of globally controlling the converter in both continuous and discontinuous current modes of operation by considering all constraints in the physical plant such as maximum inductor current and capacitor voltage limits. Different loads and input voltage disturbances are simulated in MATLAB... 

In the classical parametrization of the single-diode model of photovoltaic (PV) cells and modules based on the datasheet values, first, the values of the five unknown parameters of the PV model are extracted via the values of the open-circuit voltage Voc, the short-circuit current Isc, and the voltage and current at the maximum power point Vm, Im at standard test conditions (STC). Next, using some translational formulas, the STC values of the unknown parameters are projected to the new climatic conditions other than STC. A major problem of this approach is to determine the translational formulas of the five unknown parameters of the single-diode model as a function of both temperature and... 

The objective of this paper is to expand the concept of hybrid modeling and control in power electronics area. A new precise and non-averaged model of a DC-DC boost converter is developed on the basis of Mixed Logical Dynamical (MLD) systems, and the approach is extended by a new version of such systems which is called as Extended Mixed Logical Dynamical (EMLD) systems in this paper. A Model Predictive Controller (MPC) based on the Mixed Integer Quadratic Programming (MIQP) is designed for the MLD and EMLD models of the DC-DC boost converter considering all possible dynamics in Continuous and Discontinuous Conduction Modes of operations (CCM-DCM). The simulation results show the satisfactory... 

The main contribution of this paper is to present the systematic and low-complexity translation techniques between a class of hybrid systems referred to as automaton-based Discrete-time Hybrid Automata (DHA) and piecewise affine (PWA) systems. As a starting point, the general modeling framework of the automaton-based DHA is represented, which models the controlled and uncontrolled switching phenomena between linear continuous dynamics including discrete and continuous states, inputs and outputs. The basic theoretical definitions on the state trajectories of the proposed DHA with forward and backward evolutions that yield forward and backward piecewise affine (FPWA and BPWA) systems are... 

Challenging problems in the design and analysis of photovoltaic (PV) systems stem from the nonlinear current–voltage (I–V) characteristics of solar cells. This paper presents an analytical analysis based on a describing function method to investigate the transient and steady-state characteristics of a three-phase single-stage grid-connected PV system. In this study, the nonlinear I–V characteristic of the PV array is linearized around the operating point. The nonlinear dynamic of the maximum power point tracking controller is divided into two parts of continuous and discrete. For the continuous part, the common small-signal linearization is applied, while for the discontinuous part, a... 

Parameter extraction of the five-parameter single-diode model of solar cells and modules from experimental data is a challenging problem. These parameters are evaluated from a set of nonlinear equations that cannot be solved analytically. On the other hand, a numerical solution of such equations needs a suitable initial guess to converge to a solution. This paper presents a new set of approximate analytical solutions for the parameters of a five-parameter single-diode model of photovoltaic (PV) cells and modules. The proposed solutions provide a good initial point which guarantees numerical analysis convergence. The proposed technique needs only a few data from the PV current-voltage... 

Parameter extraction of the five-parameter single-diode model of solar cells and modules from experimental data is a challenging problem. These parameters are evaluated from a set of nonlinear equations that cannot be solved analytically. On the other hand, a numerical solution of such equations needs a suitable initial guess to converge to a solution. This paper presents a new set of approximate analytical solutions for the parameters of a five-parameter single-diode model of photovoltaic (PV) cells and modules. The proposed solutions provide a good initial point which guarantees numerical analysis convergence. The proposed technique needs only a few data from the PV current-voltage... 

The main contribution of this paper is to present a new set of approximate analytical solutions for the parameters of a photovoltaic (PV) five-parameter double-diode model that can be used as initial values for the numerical solutions based on the Newton-Raphson method. The proposed formulations are developed based on only the limited information given by the PV manufacturers, i.e., the open-circuit voltage (V), the short circuit current (I), and the current and voltage at the maximum power point (Im). Compared with the existing techniques that require the entire experimental I-V curve or additional information such as the slope of the I-V curves of the open circuit and the short circuit... 

Modeling of hybrid systems using mixed logical dynamical (MLD) systems is an art. The MLD framework often introduces numerous constraints and auxiliary binary and continuous variables, which, in turn, increase the computational complexity of the optimization problems. This paper presents an automaton-based realization for discrete-time hybrid automaton (DHA) with both controlled and uncontrolled switching phenomena by which it is attempted to develop efficient translation techniques to MLD systems and reduce the total number of decision variables in the MLD model. Based on this DHA model, a modified version of MLD systems, which is called extended MLD (EMLD) is formally defined and... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared