Sharif Digital Repository

Static and dynamic properties of porous media are highly dependent on its internal geometry. CT scan images are generally used to characterize porous media geometry. Direct simulation of fluid flow on CT scan images is possible but considerably time-consuming. In this study, a new method was developed for extracting a simplified representation known as “pore network model” by utilizing a rigorous algebraic-analytical method. By using a moving frame in the 3D matrix of the CT scan image and stepwise identifying-removing of image components, running time for a 4003 voxels sample in a typical computer system decreased to less than 350 s. The identification of throats was based on a new... 

Wettability alteration of rock surfaces toward gas wetting have been recognized as a practical approach for maximizing the production from the gas condensate reservoirs. Most of the reported work in this area applied the so called sessile drop contact angle measurement technique to examine the change in wetting state of a surface. However, the size-dependent wetting behavior of drop which could affect the exact determination of wettability and wettability changes was not well discussed in the previous studies. Therefore, in this work, the size dependency of contact angle for four different liquid-solid-gas systems; i.e., water-calcite-air, water-treated calcite-air (nanofluid treated... 

Dynamic contact angle measurement; as a standard method for surface wettability analysis, is usually conducted through the analysis of sessile drops formed following the low rate injection of fluid from beneath through a drilled hole via an injection needle. However, understanding/characterizing the changes of drop contact angle from the point where the flat solid surface begins is not well discussed yet. Moreover, during the evaluation of size-dependent behavior of contact angle of millimeter-scale drops, the effect of the drilled hole is ignored. In this regard, in the current study, the experimental and thermodynamic characterizations of the sessile drop advancing contact angle... 

In this study, the range of applicability for Cassie–Baxter and Wenzel equations for estimating apparent contact angle on rough surfaces is numerically discussed. To do this, circular drops with different sizes are simulated on rough surfaces with a square pillar pattern and randomly distributed cylindrical pillar. With the aid of numerical method, the local surface fraction, local length fraction and local roughness factor for drops with different sizes on the surface are computed. Then, the global surface fraction and global roughness factor have been compared with the local surface fraction and local roughness factor, respectively. Local surface and local length fractions, as well as... 

In this work, sessile drop and low-bond axisymmetric drop shape analysis methods were coupled to provide some new aspects on stick-slip behavior as well as stick time of a drop on calcite surfaces. Slightly hydrophobic calcite surfaces typified with three irregular roughnesses were used to create irregular surfaces to mimic defects for the water-calcite-air systems. Polishing papers of 200, 600, and 1200 grit and a polishing machine were used to prepare surfaces. X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier transform infrared, and atomic force microscopy techniques were employed to evaluate the chemical and physical properties of surfaces. A model was developed to predict... 

Wettability alteration analysis form gas-repellent to gas-wet with the aid of chemical agents has been subjected of numerous studies. However, fundamental understanding of the effect of surface tension of liquid on repellency strength, the change in the intermolecular forces due to the adsorption of nanoparticles onto the rock surfaces, and exposure of treated rock in brine are not well discussed in the available literature. In this study, X-ray diffraction, Atomic Force Microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were applied to characterize the treated and fresh samples. Dynamic and static contact angle measurements were then combined with six methods... 

Recently, super gas wet and gas wet surfaces have been extensively attended in petroleum industry, as supported by the increasing number of publications in the last decade related to wettability alteration in gas condensate reservoirs. In many cases, contact angle measurement has been employed to assess the wettability alteration. Even though contact angle measurement seems to be a straightforward approach, there exist many misuses of this technique and consequently misinterpretation of the corresponding results. In this regard, a critical inspection of the most recent updated concepts and the intervening parameters in the contact angle based wettability evaluation of liquid-solid-gas... 

One of the important challenges in the auto industry is to reduce the mass of the vehicle while meeting structural performance requirements for Crashworthiness, Noise, Vibration and Harshness (NVH) etc. In this paper, a multidisciplinary optimization (MDO) of a car back-bonnet is investigated by using trie Response Surface Method (RSM). Firstly, a car body is fully surface modeled in CATIA and meshed in HYPERMESH software. Then, modal analysis of the finite element model is performed by NASTRAN software to find natural frequencies. Frequency map of that component is extracted and compared with a reference map to detect defects. Design of Experiments (DOE) methodologies is used for a...