Sharif Digital Repository

In this work, hot tension tests were conducted on as cast and wrought samples of a high carbon high chromium tool steel to study the hot workability under the rolling conditions. The flow curves illustrate the classical shape of dynamic recrystallization (DRX). It is observed that broken carbide nets in the wrought samples result in lower deformation activation energy 398. kJ/mol in comparison to the as cast samples 432. kJ/mol. Necking strains were calculated using the inflection point of the work-hardening (θ) vs. stress curves. Wrought samples show higher hot ductility and lower maximum stress than the as cast ones. It is shown that lower activation energy of deformation and lower stress... 

A novel visible-light-driven Ag3VO4/Ag3PO4/Ag photocatalyst was successfully synthesized via an anion-exchange reaction and characterized by X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse-reflectance spectroscopy and Fourier transform infrared spectroscopy. The photocatalytic activities of prepared catalysts were evaluated by degradation of acid blue 92 (AB92) aqueous solutions under visible light irradiation. The photocatalytic results indicated that the synthesized Ag3VO4/Ag3PO4/Ag hybrid displays a significantly enhanced activity in degradation of acid blue 92 under visible light compared with pure Ag3VO4. The improved... 

In this study, MoS2/reduced graphene oxide (rGO) was used as a cocatalyst to synthesize very highly efficient Cu2O/MoS2/rGO for cooperative catalytic applications. The resulting nanocomposite was characterized by various analytical techniques and applied for catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol and photocatalytic degradation of Acid blue 92. Cu2O/MoS2/rGO composite presents superior performance to pure Cu2O particles in both catalytic and photocatalytic reactions. This excellent activity demonstrates synergistic effect of MoS2/rGO as a cocatalyst in the nanocomposite. The role of the active sites in the reduction of 4-NP and degradation of dye was discussed and... 

A novel approach is proposed to combine the strengths of GA and GP to optimize rule sets and membership functions of fuzzy systems in a co-evolutionary strategy in order to avoid the problem of dual representation in fuzzy systems. The novelty of proposed algorithm is twofold. One is that GP is used for the structural part (Rule sets) and GA for the string part (Membership functions). The goal is to reduce/eliminate the problem of competing conventions by co-evolving pieces of the problem separately and then in combination. Second is exploiting the synergism between rules sets and membership functions by imitating the effect of "matching" and friendship in cooperating teams of humans,... 

The development of efficient and cost-effective catalysts for the oxygen evolution reaction is highly desirable for applications that are based on sustainable and clean technologies. In this study, we report the synthesis of a series of cerium(iv) oxide and nickel diselenide nanocomposites (NiSe2/CeO2) as efficient electrocatalysts for the oxygen evolution reaction in an alkaline medium. The ratios of the two substances were optimized to reach the highest catalytic activity. The structure and morphology of synthesized materials were investigated by XRD, FE-SEM, EDX, BET, XPS, and TEM techniques. It was observed that the nanocomposite with a 10 : 1 mass ratio of NiSe2to CeO2showed the best... 

In this study, the Peganum harmala seed extract (PHSE) was used as a green reducing agent of graphene oxide with high deoxygenation capability. PHSE not only acts as a reducing agent of GO due to the high amount of nitrogen-rich compounds but also plays an essential role in the particles' active anti-corrosion performance improvement. In order to add more active inhibition property, the zinc cations were doped successfully on the chemical structure of GO nanosheets, and eventually, the RGO-PHSE-Zn nanocomposite was obtained. The FT-IR results and UV–visible achievements declared that the epoxide (-C-O-C-) functional groups attached to the surface of the GO nanosheets had been successfully... 

The effect of cooling rate after hot deformation on the microstructure and mechanical properties of a commercial microalloyed forging steel (30MSV6 grade) was investigated using the hot compression test. Hot compression test was performed at 1150 and 925 °C followed by air cooling at different rates. Final microstructures and mechanical properties were evaluated by optical microscopy and shear punch test (SPT), respectively. The results indicated that by increasing the cooling rate, the as-received ferritic-pearlitic microstructure changes to the acicular ferrite, bainite or martensite. It is shown that both yield and ultimate strength increase but the ductility decreases significantly. At a... 

In this study, a series of Zirconium-based MOF and chitosan composites (MOF-808/chitosan) were synthesized as efficient adsorbent for Cr(VI) ions elimination from aqueous solution. MOF-808/chitosan structure and morphology was characterized by FE-SEM, EDX, XRD, BET, zeta potential analysis, FT-IR, XPS techniques. The kinetic studies ascertained that Cr(VI) adsorption over MOF-808/chitosan followed pseudo-second-order kinetic model. The adsorption isotherms fitted the Langmuir isotherm model, implying on homogeneously adsorption of Cr(VI) on the surface of MOF-808/chitosan. According to the Langmuir model, the maximum capacity was obtained to be 320.0 mg/g at pH 5. Thermodynamic investigation... 

In this study, a folic acid-functionalized niosome was formulated and loaded with letrozole and curcumin as a promising drug carrier system for chemotherapy of the breast cancer cells. The formulation process was optimized by varying the type of Span 80 and total lipid to drug ratio, where Span 80 and lipid to drug molar ratio of 10 resulted in the niosomes with maximum encapsulation of both drugs but minimum size. The developed niosomal formulation showed a great storage stability up to one month with the small changes in drug encapsulation efficiency and size during the storage. In addition, they showed a pH-dependent release behaviour with slow drug release at physiological pH (7.4) while... 

This study aimed to synthesize methoxy polyethylene glycol propionaldehyde (mPEG20,000-ALD) for the preparation of PEGylated nanoliposomal cisplatin. Nanocarriers such as liposomes are developed for a wide range of drug delivery systems. PEG with high molecular weight (Mw) is used to coat the liposomes. In this study, simulated Fourier transform infrared (FTIR) spectra of mPEG-ALD were obtained using density functional theory (DFT) calculations and then compared with actual FTIR spectrum of mPEG20,000-ALD (Mw = 20 kDa). We found that the intensity of C = O stretching vibration at 1,700 cm-1 related to the carbonyl functional group of mPEG20,000-ALD was very weak. The results of DFT... 

Background & Objective: Breast cancer is the most common cancer among women. One of the most effective treatments for breast cancer is chemotherapy, in which specific drugs destroy the mass and its proliferation is inhibited. Chemotherapy is the most effective adjunctive therapy when multiple medications are used concurrently. Also, combining the drugs with nanocarrier has become an important strategy in targeted therapy. This study is designed to assess the apoptosis induction, cell cycle arrest, and anti-cancer potential of Tamoxifen-Curcumin-loaded niosomes against MCF-7 Cancer Cells. Methods: A novel niosomal formulation of tamoxifen-curcumin with Span 80 and lipid to drug ratio of 20... 

Magnetic carbon nanotubes (MCNTs) have been widely studied for their potential applications in medicine, diagnosis, cell biology, analytical chemistry, and environmental technology. Introduction of MCNTs paved the way for the emergence of new approaches in nanobiotechnology and biomedicine as a result of their multifarious properties embedded within either the carbon nanotubes (CNTs) or magnetic parts. Numerous preparation techniques exists for functionalizing CNTs with magnetic nanoparticles, and these versatile strategies lay the ground for the generation of novel and versatile systems which are applicable to many industries and biological areas. Here, we review and discuss the recent...