Sharif Digital Repository

The dynamic nature of today’s manufacturing industry, which is caused by the intense global competition and constant technological advancements, requires systems that are highly adaptive and responsive to demand fluctuations. Reconfigurable manufacturing systems (RMS) enable such responsiveness through their main characteristics. This paper addresses the problem of RMS configuration design, where the demand of a single product varies throughout its production life cycle, and the system configuration must change accordingly to satisfy the required demand with minimum cost. A two-phased method is developed to handle the primary system configuration design and the necessary system... 

Intense global competition, dynamic product variations, and rapid technological developments force manufacturing systems to adapt and respond quickly to various changes in the market. Such responsiveness could be achieved through new paradigms such as Reconfigurable manufacturing systems (RMS). In this paper, the problem of configuration design for a scalable reconfigurable RMS that produces different products of a part family is addressed. In order to handle demand fluctuations of products throughout their lifecycles with minimum cost, RMS configurations must change as well. Two different approaches are developed for addressing the system configuration design in different periods. Both... 

Intense global competition, dynamic product variations, and rapid technological developments force manufacturing systems to adapt and respond quickly to various changes in the market. Such responsiveness could be achieved through new paradigms such as Reconfigurable manufacturing systems (RMS). In this paper, the problem of configuration design for a scalable reconfigurable RMS that produces different products of a part family is addressed. In order to handle demand fluctuations of products throughout their lifecycles with minimum cost, RMS configurations must change as well. Two different approaches are developed for addressing the system configuration design in different periods. Both... 

Intense global competition, dynamic product variations, and rapid technological developments force manufacturing systems to adapt and respond quickly to various changes in the market. Such responsiveness could be achieved through new paradigms such as Reconfigurable manufacturing systems (RMS). In this paper, the problem of configuration design for a scalable reconfigurable RMS that produces different products of a part family is addressed. In order to handle demand fluctuations of products throughout their lifecycles with minimum cost, RMS configurations must change as well. Two different approaches are developed for addressing the system configuration design in different periods. Both... 

Nowadays, many manufacturing and service systems provide products and services to their customers in several consecutive stages of operations, in each of which one or more quality characteristics of interest are monitored. In these environments, the final quality in the last stage not only depends on the quality of the task performed in that stage but also is dependent on the quality of the products and services in intermediate stages as well as the design parameters in each stage. In this paper, a novel methodology based on the posterior preference approach is proposed to robustly optimize these multistage processes. In this methodology, a multi-response surface optimization problem is... 

Interactive and integrated design and manufacturing can be a useful strategy for designers to reach the efficient design through the cognitive or physical interactions. Process tolerance design is a key tool in the integrated design and manufacturing to reach a product with high quality and low cost. Since the optimal tolerance allocation involves several aspects of the design, manufacturing and quality issues, it is always a time consuming and difficult procedure, especially for complex products. Therefore, to overcome these difficulties, a computer-aided approach for optimal tolerance design of manufacturing process is needed in the design stage. In this paper, a novel interactive... 

Interactive and integrated design and manufacturing can be a useful strategy for designers to reach the efficient design through the cognitive or physical interactions. Process tolerance design is a key tool in the integrated design and manufacturing to reach a product with high quality and low cost. Since the optimal tolerance allocation involves several aspects of the design, manufacturing and quality issues, it is always a time consuming and difficult procedure, especially for complex products. Therefore, to overcome these difficulties, a computer-aided approach for optimal tolerance design of manufacturing process is needed in the design stage. In this paper, a novel interactive... 

COVID-19 pandemic caused an increasing demand for online academic classes, which led to the demand for effective online exams with regards to limitations on time and resources. Consequently, holding online exams with sufficient reliability and effectiveness became one of the most critical and challenging subjects in higher education. Therefore, it is essential to have a preventive algorithm to allocate time and financial resources effectively. In the present study, a fair test with sufficient validity is first defined, and then by analogy with an engineering product, the design process is implemented on it. For this purpose, a hybrid method based on FMEA, which is a preventive method to... 

Imprecise productions with low quality are produced by the incapable manufacturing processes. Prediction of the process capability in the design stage plays a key role to improve the product quality. In this paper, a new method is proposed to optimally reduce the locating error by allocating the minimum adjustments of locators. To quantify the precision of the manufacturing process, a proper tool that is called the geometric capability ratio (GCR) of the manufacturing process is introduced. First, based on a part fixture model, the relationship between the locating error and its sources is developed. Then, using the proposed geometric capability ratio, the manufacturing process capability is... 

Real-time measurement of soil water pressure has been recognized as an essential part of investigating water ow in unsaturated soils. Tensiometry, amongst di erent measuring techniques, is a common method for direct evaluation of water pressure. However, the lower limit of measurable water pressure by a conventional tensiometer becomes even more limited by increasing its length in the vertical installation. This paper describes the development of a Vacuum-Re lled Tensiometer (VRT) for monitoring soil water pressure independent of installation depth. This is achieved by xing the distance between pressure sensor and ceramic cup together with incorporating an ancillary vacuum-re lling assembly... 

Real-time measurement of soil water pressure has been recognized as an essential part of investigating water ow in unsaturated soils. Tensiometry, amongst different measuring techniques, is a common method for direct evaluation of water pressure. However, the lower limit of measurable water pressure by a conventional tensiometer becomes even more limited by increasing its length in the vertical installation. This paper describes the development of a Vacuum-Refilled Tensiometer (VRT) for monitoring soil water pressure independent of installation depth. This is achieved by fixing the distance between pressure sensor and ceramic cup together with incorporating an ancillary vacuumre filling... 

This article investigates the basis for pressure sensor application based on the magnetic shape memory effect in membranes. Von Karmans nonlinear terms are considered in strain–displacement relationships of thin films, and a new method is presented for solution of large deflections of thin films with arbitrary boundary condition. In this study, the equations of motion of magnetic shape memory alloys are extended. In pressurized membranes, the complex distribution of mechanical stress can cause the martensitic reorientation, which is the underlying mechanism for sensing applications in magnetic shape memory alloys. To examine the obtained model, the governing equations of magnetic shape... 

This article investigates the basis for pressure sensor application based on the magnetic shape memory effect in membranes. Von Karmans nonlinear terms are considered in strain–displacement relationships of thin films, and a new method is presented for solution of large deflections of thin films with arbitrary boundary condition. In this study, the equations of motion of magnetic shape memory alloys are extended. In pressurized membranes, the complex distribution of mechanical stress can cause the martensitic reorientation, which is the underlying mechanism for sensing applications in magnetic shape memory alloys. To examine the obtained model, the governing equations of magnetic shape... 

In this paper, a tolerance allocation approach is proposed which attempts to select tolerances for individual dimensional variables of a product in a way that minimizes the cost while maintaining critical design requirements. The algorithm uses a reciprocal power cost-tolerance function which incorporates variable sensitivities computed in a DLM-based tolerance analysis technique. The process capabilities are applied as constraints and the genetic algorithm is used to find the optimum solution. The method is applied to a heavy duty brake problem and its results are presented. Copyright © 2005 SAE International  

In recent years, the technological advancement of supercapacitors has been increasing exponentially due to the high demand in electronic consumer products. As so, researchers have found a way to meet that demand by fabricating graphene. As developments are made toward the future, two big advancements to be made are large-scale fabrication of graphene and fabricating graphene as a flexible electrode. This would allow for use in larger products and for manipulation of the unique properties of graphene to accommodate superior design alternatives. While large scale production is still mentioned, this review is specifically focusing on different methods used to fabricate graphene as a flexible... 

Fruit and vegetable wastes are produced in large quantities in Iran, and constitute a source of nuisance in municipal landfills. The objective of this study was to optimize the applications of anaerobic digestion for the treatment of municipal organic wastes. We studied the effect of organic loading rates on anaerobic digestion of vegetable wastes. The complete-mix, pilot-scale digester with working volume of 70 1 was used. The experiments were conducted at 34°C with a fixed hydraulic retention time of 25 days. The digester was operated at different organic feeding rates of 1.4, 2 and 2.75 kg VS/(m3.d). The biogas produced had methane composition of 49.7- 64% and biogas production rates of... 

Gamma irradiation systems are used extensively in the industry in order to sterilize medical devices, disinfect hygienic products and increase the shelf life of agricultural products. The method of gamma irradiation is superior to the older methods of heat or chemical treatment because it is by far a simpler operation. In this method, only one parameter, the exposure time is controlled, whereas in the other mentioned methods five or six different parameters need to be controlled. The design of irradiation systems generally includes the size and the location of products, and the arrangement of source rack pencils. In order to optimize the design of the gamma irradiation systems, it is needed... 

This paper presents a sequence of affordable methods applied to diagnose a millimeter-wave system-in-package. The module used in this paper is a 60 GHz transceiver with a waveguide interface, designed to transmit 8 dBm of saturated power. It consists of a flip-chipped RFIC, a multi-layer organic substrate, a metal enclosure with a standard waveguide interface, passive components and a 30-pin connector. The first measured output power was 3 to 6 dB below the desired value over the 60 GHz band. Thus, all parts of the module were thoroughly investigated to detect the cause of power drop. By 3-D electromagnetic simulation of the enclosure, the cavity modes and power leakage in the enclosure were... 

In this paper a web based production system is proposed. This system consists of a web services agent to manage the receipt the order from the customer, a price agent to predict the price of the product for the customer, a decision agent to build up a virtual enterprise to manufacture and deliver of the product to the customer and make essential decisions of the system and a design and control agent to do the engineering tasks related to the production process of the product. This structure provides the production system with a high level of agility and flexibility. © 2019 IEEE  

The ability and how to use a microwave life-detection system to search for the humans buried under earthquake rubble or laid behind various barriers has been investigated. Based on the behavior of a human under multiple layers of barriers and the detection capability of the microwave tools a system has been proposed. This system operating at 1150 MHz can remotely detect the movement of the heart of the trapped alive people. The operation principle is based on detection of the Doppler frequency shift of the electromagnetic wave reflected from the periodic moving part of a living human body such as the heart. In this paper, various parts of a microwave life-detection system such as patch...