Sharif Digital Repository

Linear structure of polypropylene, which is a direct result of Ziegler-Natta catalysts, led to the melt strength of the polymer is low and it does not show hardness strain. This defect is cause to the use of polypropylene in some processes, such as thermoforming, making foam etc. are limited. A main methods to solve this defect are branching structure of the polymer. There are three general methods for this purpose, which are modified by chemical, electron beam irradiation and polymerization in the presence of metallocene catalyst. The first two methods that past processing, polypropylene branching using linear type is produced, while the third method branching occurs during polymerization.... 

Homo-polymer of Polypropylene is a commodity thermoplastic with good physical and mechanical properties along with fair recyclability and cost. However, its application is limited in some cases, especially in automotive industry, due to a lack of toughness. One of the approaches for PP toughening is the copolymerization of PP with some ethylene co-monomers. However, existence of elastomers in this kind of polymers causes a decrease in tensile properties. Besides, glass fibers improve tensile properties of homo-and co-PP and decrease toughness of co-polymers but result in an increase for homo-polymers. A rise in expenditure of energy due to increasing the processing temperature and... 

It used to be widely accepted as a virtue in engineering society that, fibers are generally used as mechanism to resist cracking and increasing the strength of concrete in some cases. Since 1990, fibers are usually used in concrete to control cracking due to plastic shrinkage and to drying shrinkage. They also reduce the permeability and bleeding of concrete. Some types of fibers produce greater impact, abrasion and shatter-resistance in concrete. Studies turn this notion to cognition that among all types of existing fibers, Steel Fiber and Polypropylene Fiber resulted the highest improved behavior in concrete. The Ultra-High-Performance Concrete which heated the debate in recent papers... 

Polypropylene (PP) is one of the most widely used commercial plastics in various industrial applications due to its desirable physical and mechanical properties and low cost. Engineering properties of this polymer depend very much on its crystalline structure. It is a common practice in polymer industry to modify crystalline structure by means of nucleating agents. Since nucleating agents are added in a rather low level to polymers, some investigators have tried this task in modifying crystalline structure of polypropylene by incorporating nucleating agent masterbatches. However, none have looked at the possible influence of the carrier resin in such masterbatches on the performance of... 

Polymer blending has an important role in preparation of materials with suitable properties without synthesizing new polymers. One of these blends is polypropylene (PP)/ polyethylene (PE). PE is added for improving the impact strength and toughness of PP. For improvementof the properties, a compatibilizer is used due to incompatibility of the PP/PE blend. Improving the impact properties is usually related to the reduction in stiffness. Considering the importance of stiffness in many industrial applications, mineral fillers are employed for increasing the stiffness. In this research, the goal has been to manufacture polypropylene-based ternary composite(Polypropylene/ Polyethylene/Nanometric... 

In today’s world the growth in population make food production and also the packaging industry increase. Finding new ways to enhance the efficiency of packaging is become so important beyond researchers. As the randomized co-polypropylene is the most suitable materials for this industry many attempts have been made to control its melting behavior with the aim of expanding their application in the packaging industry. The study in this field indicate the dependence of the melting behavior on the structural characteristics of the material such as molecular mass, chain structure, type of crystalline structure, and the amount of dispersion of the crystals thickness. Due to the lack of proper... 

Polypropylene block copolymer is used in different industries like pipe productions. This copolymer has proper mechanical properties, specially it has good impact strength, but in some applications it’s elastic modulus (stiffness) is not enough and that leads to some problemes in servise. Nucleating agents influence crystalline structure and properties and also the mechanical properties by controlling the crystallization process. Nanoparticles also have a beneficial effects on physical and mechanical properties. In this study, the effect of adding two types of α-phase nucleating agents (commercial names NA11 and DMDBS) in the form of masterbatch wt 5% with a carrier of polypropylene block... 

In this project, Fe3O4 magnetic nanoparticles were prepared by co-precipitation method. For protecting them against oxidation and also avoiding from direct contact between core and additional materials that probably makes unwanted reactions, the surface of nanoparticles were coated by SiO2 layer. Being easy to modify and having the control of interactions between nanoparticles are the advantages of coating nanoparticles with silica. The obtained Fe3O4@SiO2 core-shell nanoparticles were covered by two types of polymer (PPG and PEG). The basis of the composite was characterized by VSM, TGA, SEM, XRD, and FT-IR analytical methods.
The antibacterial activities of Copper, Silver and Gold... 

The consumption of plastics in the world is increasing and this is accompanied by the challenges of production from oil products and carbon footprint, waste production and environmental issues. The solutions to these challenges are material recycling and the production of biocompatible plastics. Polypropylene is a widely used polymer that is commonly used in conjunction with reinforcements such as fiberglass. Natural fibers can be substituted to increase the biocompatibility of the composite, which, despite its many advantages, presents challenges. The most important challenge is the poor adhesion of the fibers and the matrix due to the hydrophilicity of natural fibers and hydrophobicity of... 

Propylene Copolymers and terpolymers with small amount of 1-butene& ethylene can greatly improve the properties of polypropylene material such as low temperature toughness, printing performance, transparency, process ability and so on, leading to expanding of its application. Poly(propylene-co-1-butene) performance intensely relies on its composition and chain structure. The copolymerization catalyzed by Ziegler-Natta catalyst, which is a multy-active central system. The Ziegler-Natta catalyst TiCl4/ Mg(OEt)2/ DIBP was used for copolymerization. The microstructure of copolymers were characterized by FTIR. The influence of different comonomer ratios on the copolymerization has been... 

In this research polypropylene/carbon nanotube nano composites were prepared via in situ polymerization using Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Multi wall carbon nanotubes(MWCNT) functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 and TiBA were used as catalyst and co catalyst respectively. After defining the polymerization optimum conditions and considering its parameters constant, nano composites with different carbon nanotube contents were produced by changing the polymerization time. Scanning Electron Microscopy (SEM) images certified very good dispersion of MWCNTs throughout polypropylene matrix. The thermal properties behavior of... 

Multiwall carbon nanotubes (MWCNTs) and carbon black (CB) reinforced polypropylene/polyamide6 (75/25) nanocomposites were prepared by melt compounding approach. Polypropylene grafted with maleic anhydride (PP-g-MA) was used as compatibilizer. Different amount of fillers were introduced into the polymer blends. The morphology, mechanical, rheological properties and crystallization behavior of the composites were investigated. Scanning electron microscopy was employed to study the microstructure. Differential scanning calorimetry (DSC) results showed that the addition of MWNT or CB to PP/PA6 blend resultes increase in crystallinity degree of PA6. The fillers were found to be located... 

The main object of this thesis is production and investigation of polypropylene-fumed silica nanocomposites by using bi-supported Ziegler-natta catalytic system and in-situ polymerization. Magnesium ethoxide and fumed silica were used as supports of catalyst. TiCl4 was accompanied by triisobutyl aluminum(TiBA) and diisobutyl phthalate(DIBP) as electron doner constituting Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were taken place in slurry phase under the argon atmosphere. At the beginning of the polymerization experiment, several type of nanocomposites were made under various conditions(such as different Al/Ti molar ratio) to find optimum condition to... 

Blending can be used as one of the ways of producing materials with appropriate properties, which have many relative advantages in comparison with other methods like polymerization. Among the existing blends in the market and scientific areas, blends of polyurethane thermoplastic and polypropylene have been also studied because of its commercial importance and scientific interest. This blending can improve the mechanical properties, friction resistance, improvement of impact strength at low temperatures and improvement of plasticity properties. In this research, blends with different ratios of TPU/PP is produced by melt mixing, and for improving properties of blends, two kinds of nano fumed ... 

In this study, the response surface methodology (RSM) based on the central composite design (CCD) were used to prepare a polypropylene grafted maleic anhydride (PP-g-MA) microporous flat sheet membrane via thermally induced phase separation (TIPS) method. Mixture of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) were used as diluent. The effect of the polymer composition and coagulation bath temperature on the morphology and performance of the fabricated microporous membranes in a bioreactor (MBR) were investigated. Analysis of variance (ANOVA) was used to determine which variables and interactions between variables have a significant effect on our responses. The ANOVA revealed that the... 

Considering principles of both micro-solid phase extraction (µ-SPE) and stir-bar sorptive extraction (SBSE) techniques, in this study a microextraction technique was developed using a polypropylene sheet as extracting device for isolation of fluoxetine from biological samples. Being rather inexpensive and simple to prepare extracting device, elimination of time consuming sorbent synthesis step and memory effect are some of the advantages of the proposed method. The extraction process was performed using a polypropylene sheet as extracting device. Solvent desorption was performed in a microvial and then extractant was injected into HPLC system. The effect of various parameters including pH,... 

The aim of this study was to evaluate the effects of applying low replacement ratios (0.75% and 1.50% of the binder weight) of nano-SiO2 particles with different specific surface areas (200 and 380 m2/g) on the properties of high-performance concrete (HPC). Mechanical (compressive and splitting tensile strengths), electrical resistivity, non-destructive (ultrasonic pulse velocity), and microstructural (mercury intrusion porosimetry, X-ray diffraction, and scanning electron microscopy) tests were conducted to investigate the macroscopic and microscopic effects of nano-SiO2 particles on HPC characteristics. The results indicated that the performance of nano-SiO2 particles significantly... 

Today, in many industries polypropylene is used as a polyolefin with favorable properties such as chemical resistance, fatigue strength, electrical insulation, as well as good mechanical properties such as high Yang modulus, good toughness, and so on. On the other hand, polyolefins have poor thermal resistance and high flammability. Over the years, many researchers have been working to reduce their flammability through different methods and increase their thermal resistance. Among these methods, adding materials that delayed flammability or stoped it, can be noted. In the industry, these anti-flammable additives are called flame retardants. Flame retardant additives should be selected to... 

In this study, the synthesis conditions of polyaniline were optimized in order to produce a blend based on polypropylene (PP) containing polyaniline (PANI) with the electrical conductivity in the antistatic range. A form of PANI that has adequate electrical conductivity and thermal stability, which is suitable for melt-mixing and melt-spinning conditions, was synthesized. Thermal stability and electrical conductivity of polyaniline were investigated by thermal gravimetric analysis (TGA), differential calorimetric analysis (DSC) and high-temperature electrical conductivity. It was found that the synthesized PANI has required thermal stability and electrical conductivity (106 ohm.cm) at the... 

One of the most popular methods in order to protect foods is to package using various materials. By this act, the shelf life of the packaged foods may range from a few days to more than a year. Multiple types of plastics are being used as materials for packaging food, including polyolefin, polyester, polyvinyl chloride, polyvinylidene chloride, polystyrene, polyamide, and ethylene vinyl alcohol. Although more than 30 types of plastics have been used as packaging materials, polyolefin and polyesters are the most common. Biaxially Oriented Polypropylene (BOPP) is a polypropylene film that has been stretched in both the machine and cross directions. BOPP film has become one of the most popular...