Sharif Digital Repository

Recycling of polymers, with the aim of environmental protection and economical benefits, is important procedure, which is constantly developing. In this study the effect of the incorporation of recycled PET(r-PET) and recycled polypropylene/Flax(r-PP/Flax) to PP at low (20wt %) and medium content (40wt %) of r-PET was investigated. Polymer compounds were prepared by twin screw extruder followed by injection moulding. The effect of r-PP/Flax and r-PET on PP was evaluated using different techniques such as scanning electron microscopy (SEM), differential scanning calorimetery (DSC), rheological behavior, and mechanical properties (tensile modulus, yield strength, and charpy notched impact... 

In the first part of this work, citric acid monomer was selected to produce dendrimer through the divergent method using logical conditions (for controlling its functional groups) on the base of poly (ethylene glycol) as the core. Triblock copolymers (ABA-type) of citric acid and poly (ethylene glycol) (PCA-PEG-PCA) as biocompatible compounds were synthesized in four different molecular weights and applied as nanocarriers. The structure definition of the molecules and nanoparticles were carried out using different spectroscopy methods. Diameter of the synthesized copolymers was investigated using dynamic light scattering (DLS) experiments and transmission electron microscopy (TEM) and it was... 

In this research UHMWPE/MWCNT nanocomposites with different concentrations of nanotubes (0.5, 1.5, 2.5, 3.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Multi wall carbon nanotubes functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Support of catalyst on MWCNT was investigated using Fourier Transform Infrared Spectroscopy (FTIR). The results confirmed interaction between catalyst and hydroxyl groups on the surface... 

Application of nanoparticles in targeted delivery and controlled drug release is recently highly attracted especially in cancer therapy. In this study with the aim of developing a novel drug vector based on metallic nanoparticles, gold nanoparticles with their unique characteristics were used to design a vector for targeted anti-cancer drug delivery to tumor. First, gold nanoparticles were chemically synthesized therough sodium citrate and sodium brohydrate reductions with average diameters of 22 and 11 nm, respectively. Then, the activated poly ethylene glycol (PEG) and activated folic acid were conjugated to the lysine-capped gold nanoparticles. Subsequently, the widely used anticancer... 

In this research UHMWPE/FUMED SILICA nanocomposites with different concentrations of nano fumed silica (0.5, 1.5, 2.5, 4.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Fumed Silica functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Scanning Electron Microscopy (SEM) images also certified very good dispersion of fumed silica throughout PE matrix. Intrinsic viscosity measurements showed high molecular weight for... 

In this research UHMWPE/CB nanocomposites were prepared via in situ polymerization using Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and carbon black were used as supports of catalyst. TiCl4 accompanied by triisobutyl aluminum and diisobutyl phthalate (DIBP) constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Then, structural, thermal and mechanical properties of produced nanocomposites with different CB content were evaluated by SEM, DSC, TGA, DMTA and tensile tests. Scanning Electron Microscopy (SEM) images also certified very good dispersion of CBs throughout PE matrix.... 

Plasticizers in cementitious systems are additives that upon addition at a low dosage can change the workability, mechanical strength and other properties of cement paste effectively. In this study, tri-block copolymers based on poly ethylene glycol (PEG) was synthesised and their applications in the cementitious systems investigated. The main purpose is the verification of plasticizing effects of these copolymers in the cement paste. ABA tri-block copolymers with PEG (1000 and 1500 g/mol) as B block, poly caprolactone, poly caprolactam, poly lactide and poly glycolide (with different weight ratio) as A block were synthesised via ring opening polymerization with stannous octanoate as... 

Blending different polymers to achieve a compound with modified Physical physical and mechanical properties, has interested researchers for years. Among all, LDPE and HDPE have attracted a great attention for this purpose; specially when a mineral filler like clay is another part of composite. In the related literature, it is proven that small amounts of clay can improve physical and mechanical properties in comparison to virgin blend. Focus of this research is on HDPE/EVA/Clay nanocomposite and its physical and mechanical properties. Having vinyl group, EVA is a compatibilizer that makes clay to disperse better; EVA can also makes the brittle HDPE tougher. At first, HDPE/EVA blend... 

The nanoparticles have been widely used in the field of physics, chemistry, electronics and mechanics because of their high surface area. One of their most important applications is in drug delivery systems as smart drug nanocarrier. Magnetic nanoparticles (including Fe2O3, Fe3O4) are the good candidates for this purpose. It is clear that, upon to entrance of nanoparticle into biological media (such as plasma), the surface of nanoparticles were covered by protein layers (protein corona). This layer is very stable and created new surface on the nanoparticles. The protein corona layer intracts with cellular receptors and determines the fate of nanoparticles. Protein corona covers the targeting... 

Melt blending of polymers is a rather cheap and easy approach for obtaining new set of properties compared to synthesizing new polymeric materials. For the same reason, binary and ternary polyethylene blends are made to provide added value for different applications. Polyethylene blends are commonly composed of high density polyethylene (HDPE), low density polyethylene (LDPE) and linear low density polyethylene (LLDPE). Although the Mechanical and physical properties of polyethylene binary blends have been studied extensively, microstructure and mechanical properties of polyethylene ternary blends have been the subject of very few studies. In this work, samples with 40-60 Wt. % HDPE and... 

Recently, due to the increase of environmental concerns, a significant raise in applying films and packaging containers, pollution produced from petroleum-based plastics packaging and problems arising from the various methods of waste disposal, the researchers have concentrate to replace these materials with biodegradable ones. In this study, a nanocomposite based on alloy matrix of thermoplastic starch and polyethylene which is reinforced with different amounts of Montmorillonitenanoclay has been constructed by the extrusion process. Furthermore, in order to increase the compatibility between the polar and non-polar components in the group of samples, compatibilizer was used and its... 

In this study the behavior of buried pipes under permanent ground deformation (PGD) ef-fects caused by reverse faulting is investigated by means of both experimental and numeri-cal approaches. A total number of 7 full-scale experiments on buried steel pipes subjected to a fault offset of 0.6 m along the slip plane is carried out and the effects of different pa-rameters such as pipe diameter (114.3 mm (4ʺ) and 168.3 mm (6ʺ)), burial depth (0.25m, 0.5m, 1 m) and soil type (SW and SM) on the response of the buried pipes are studied. Ex-perimental results show that the pipe deformation shape changes with increasing burial depth from half-sine (for shallow depths) to an S-shape (for moderate to... 

Polycarbonate (PC) and polyethylene-terephthalate (PET) are important engineering thermoplastics. During last decades these polymers and their blends have been studied extensively due to their wide range of applications. Blends of PET and PC combine mechanical properties and chemical resistance together, which make applicable in various components such as automotive, electrical and of medical parts. It has been accepted that PET/PC immiscible blends are subjected to transesterification reactions during thermal processing, which produces PET-PC copolymer chains. In fact, scissioning and substitution of ester/carbonate functional groups of PC and PET at the interface, transforms the initial... 

Ultra high molecular weight polyethylene has attracted the attention of numerous researchers and industries. This polymer due to its strong properties can be used in advanced military industries, medical engineering and cases in which high strength and high abrasion resistance is required. Present study aims to fabricate UHMWPE/Molybdenum disulfide composites, using in-situ polymerization. Before carrying out the polymerization process, nanoparticles of molybdenum disulfide underwent various processes such as oxidation, pickling, ultrasonic and thermal shock, in order to increase the interlayer distance and creating functional groups on the surface, then various analyzes, such as XRD, FESEM,... 

Nowadays filtration process is increasingly used in various areas such as water purification, food industries, filtering the air dust and other separation applications. In this work, the HDPE microporous filters have been fabricated at different temperature, pressure and time conditions via sintering process and then were characterized by different techniques. It can be expected that microstructure and mechanical properties of the samples could be controlled by changing the fabrication parameters of the process and also by changing the properties of the resin such as powder shape, particle size and rheological properties. In the first step, by using DSC, MFI, rheology test and optical... 

Vortex flow is one of the most sophisticated fluid movements in nature which has great industrial and scientific importance. In this dissertation, in order to study the combustion process due to a vortex flow, a new experimental model of a cold wall vortex engine, was designed, fabricated and tested with oxidizer issuing tangentially toward the end of the chamber. The cold wall effect in these chambers is a result of the cool layer of oxidizer which significantly reduces the amount of heat transfer to the chamber’s wall. This experimental model was designed to withstand the massive temperature rise resulting from the usage of Polyethylene as fuel and Nitrous oxide as oxidizer. In a series of... 

Today, tissue engineering research is expanding to a large extent, so tissue engineering has the ability to build artificial organs and tissues. In this project, we have used two polymers of polyethylene glycol and polyvinyl chloride, which are used for network irradiation. After irradiation, these polymers were made by drying the freewheeling porous scaffolds and the effect of different parameters on the structure of these scaffolds was investigated. To investigate the effect of different factors on gelation, swelling, tensile test, degradability and finally the conditions of fibroplast cell growth on scaffolds were investigated. The results of the gel test showed that the gel was higher... 

In Lithium ion batteries, the separator is membrane that placed between the cathode and the anode is one of critical components. Its primary function is to effectively transport ionic charge carriers between two electrodes as an efficient ionic conductor as well as to prevent the electric contact between them as a good electric insulator. The separator does not involve directly in any cell reactions, but its structure and properties play an important role in determining the battery performance. Commercially available polyolefin separators low cost, good electric resistance, high electrochemical stability, and effectively prevent thermal runaway caused by the electrical short-circuits or... 

Polymer blending has an important role in preparation of materials with suitable properties without synthesizing new polymers. One of these blends is polypropylene (PP)/ polyethylene (PE). PE is added for improving the impact strength and toughness of PP. For improvementof the properties, a compatibilizer is used due to incompatibility of the PP/PE blend. Improving the impact properties is usually related to the reduction in stiffness. Considering the importance of stiffness in many industrial applications, mineral fillers are employed for increasing the stiffness. In this research, the goal has been to manufacture polypropylene-based ternary composite(Polypropylene/ Polyethylene/Nanometric... 

Medical engineering advances in total joint replacements and society’s rising demand for long lasting materials, have proven it essential to manufacture materials that are more similar to the original tissue in the fields of mechanical, tribological and biological properties. Ultra High Molecular Weight Polyethylene(UHMWPE), is a polymer widely used in arthroplasty applications due to its biocompatibility, chemical stability and proper mechanical properties. In this study, UHMWPE-HAp nanocomposites reinforced with Zirconia and Graphene were manufactured aiming to reach a structure that is more compatible with bone tissue and also to improve overall properties. First, using ultrasonication...