Sharif Digital Repository

A novel efficient and cost-effective heterogeneous catalyst for the production of biodiesel from transesterification of sunflower oil was prepared through the impregnation of K2CO3 upon the Talc material. The physicochemical features of the catalyst were studied through several characterization analyses. The effect of the K2CO3 loading was investigated by comparing the catalytic activity of various prepared catalysts. Moreover, the effect of the calcination temperature upon the catalytic activity was examined. To maximize the yield of the produced biodiesel fuel, reaction variables such as the reaction time and temperature, catalyst concentration, and methanol: oil molar ratio were... 

MFI-type zeolite was successfully synthesized by hydrothermal crystallization of clear synthesis mixtures. A statistical experimental design method (the Taguchi method with an L8 orthogonal array) was implemented to optimize the experimental conditions for the preparation of MFI nanocrystals with respect to particle size and distribution as the desirable properties. In the Taguchi experimental design, crystallization temperature, water content, template/silica molar ratio, aluminum content, as well as the presence of alkaline cations were chosen as significant parameters affecting the properties. It was shown that water and aluminum content of the synthesis solution were the most important... 

Linear-dendritic copolymers containing hyperbranched poly(citric acid) and linear poly(ethylene glycol) blocks (PCA-PEG-PCA) were used as reducing and capping agents to synthesize and support gold nanoparticles (AuNPs). PCA-PEG-PCA copolymers with 1758, 1889 and 3446 molecular weights, called A1, A2 and A3 through this work, respectively, were synthesized using 2, 5, and 10 citric acid/PEG molar ratios. The diameter of A1, A2 and A3 in a fresh water solution was investigated using dynamic light scattering (DLS) and it was between 1.8 and 2.8 nm. AuNPs were simply synthesized and supported by addition a boiling aqueous solution of HAuCl4 to aqueous solutions of A1, A2 and A3. Supported AuNPs... 

The mechanism of surfactants in surfactant-in situ chemical oxidation (S-ISCO) coupled process for trichloroethene (TCE) degradation was firstly reported. The performance of TCE solubilization and inhibition of TCE degradation in three nonionic surfactants (TW-80, Brij-35, TX-100) in PS/Fe(II)/citric acid (CA) system was compared and TW-80 was evaluated to be the optimal surfactant in S-ISCO coupled process due to the best TCE solubilizing ability and minimal inhibition for TCE degradation (only 31.8% TCE inhibition in the presence of 1 g L−1 TW-80 surfactant). The inhibition mechanism in TCE degradation was also demonstrated by comparing the strength of ROSs and PS utilization. In the... 

The effect of bisulfite (HSO3–) in nCaO2/Fe(III)/HSO3– system on improving HO• generation and trichloroethene (TCE) removal was innovatively reported. The enhancement mechanism of HSO3– for TCE removal in nCaO2/Fe(III)/HSO3– system was caused not only by the complexing and reducing effects on promoting the conversion of Fe(III) to Fe(II), but also due to the reaction with O2 in water to produce SO4–• for accelerating TCE degradation. A double effect of nCaO2 as an oxidant source to generate HO• and as a O2 source to promote SO4–• generation was revealed. A pseudo-second-order kinetic model of TCE removal was determined and 94.6% TCE degradation was achieved within 60 min at the... 

This study was aimed at evaluating the effects of alkali activator solution and utilization of silica fume (SF) on durability and microstructural characteristics of alkali-activated ground granulated blast furnace slag (GGBFS) pastes. The pastes were activated with sodium silicate (SS) blended with NaOH (SH) solution with molar concentrations of 8 M, 12 M, and 16 M and SS:SH ratios of 1.0, 2.5, and 4.0. The same mixes were prepared with SF as partial replacement of GGBFS at a dosage of 10% by weight. The initial and final water absorption as well as the electrical resistivity of the specimens were measured. The optimal paste fabricated with 12 M NaOH solution and SS:SH ratio of 2.5 showed... 

This study was aimed at evaluating the effects of alkali activator solution and utilization of silica fume (SF) on durability and microstructural characteristics of alkali-activated ground granulated blast furnace slag (GGBFS) pastes. The pastes were activated with sodium silicate (SS) blended with NaOH (SH) solution with molar concentrations of 8 M, 12 M, and 16 M and SS:SH ratios of 1.0, 2.5, and 4.0. The same mixes were prepared with SF as partial replacement of GGBFS at a dosage of 10% by weight. The initial and final water absorption as well as the electrical resistivity of the specimens were measured. The optimal paste fabricated with 12 M NaOH solution and SS:SH ratio of 2.5 showed... 

In this contribution, reduced grapheme oxides (rGO) with immobilized tin oxide (SnO2) nanocatalysts were synthesized via the Incipient Wetness Impregnation (IWI) method. To characterize the SnO2/rGO composites, several analyses including the; XRD, Raman, FTIR, ICP-OES, BET-BJH, XPS, TEM, and TPD were utilized. Then the effects of parameters including reaction time, total metal loading, and the initial sulfur concentration of model fuel in the dibenzothiophene (DBT) oxidation desulfurization process were evaluated. After determining the optimal conditions for the aforementioned parameters, the influences of 3 effective factors of the molar ratio of oxidant/substrate (O/S), the molar ratio of... 

Smart bio-based shape memory polymers with high performance and fast response have the exciting potential to meet the growing need in biomedical applications. In this study, novel fast response UV-curable shape memory polyurethane acrylates (SMPUAs) comprising polycaprolactone diols (PCL-Diol), hexamethylene diisocyanate (HDI) and hydroxy-methyl methacrylate (HEMA) were synthesized by two-step bulk polymerization. Two series of PUAs with almost the same amount of hard segment content (HSC) were prepared with varying soft-segment molecular weight (2000, 3000, and 4000 g/mol) and different molar ratios of constituents. A mono-functional reactive diluent was used to control HSC and reduce the... 

Penicillin G is an active pharmaceutical ingredient of great importance in health sectors. Meanwhile, because of its huge quantity production and resistance to biodegradability, this antibiotic is ubiquitously presented in aquatic environment. In this study, the degradation of effluent wastewater from Penicillin G production plant by Photo- Fenton process and Ultrasound process (Sonolysis) was investigated, the effects of different process variables in both methods were evaluated and at last the degradation of Pen-G by these two processes in the optimum conditions was compared. Pen-G concentration and Chemical Oxygen Demand (COD) were selected as the environmental parameters to follow the... 

In this study the influence of the molar ratios such as SiO2:Al2O3:Na2O:H2O, as well as the sand particles on the mechanical performance, shrinkage and microstructure of metakaolin based geopolymers was studied. Considering different content of the reactive silica and alumina in metakaolin, forty eight different compositions were prepared. The proper condition for achieving the highest mechanical performance as well as less structural defects by tailoring the curing condition, molar ratios and addition of sand particles are presented. Special attention was paid to the incorporation of sand particles up to 70 wt% on the microstructure, shrinkage and mechanical properties of metakaolin based... 

In the current study, gold nanoparticles (AuNPs) were prepared using the green synthesis method using Artemisia annua extract, loaded into niosomes, and investigated their cytotoxicity and apoptotic effects. To optimize the niosomal formulation containing AuNPs, the effects of surfactants: cholesterol molar ratio, Span 60: Tween 60 M ratio, and AuNP concentration (µg/mL) were investigated. After examining the drug release profile, mathematical models were assessed to predict release kinetic. The cytotoxicity of noisome encapsulated AuNPs and free AuNPs was evaluated against human ovarian cancer cell line (A2780) by MTT assay. The apoptotic/necrosis ratio was studied using flow cytometry as... 

In this article, preparation of polypropylene/clay nanocomposites (PPCNC) via in situ polymerization is investigated. MgCl2/montmorillonite bisupported Ziegler-Natta catalyst was used to prepare PPCNC samples. Montmorillonite (MMT) was used as an inert support and reinforcement agent. The nanostructure of the composites was characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy techniques. Obtained results showed that silica layers of the MMT in these PPCNC were intercalated, partially exfoliated, and uniformly dispersed in the polypropylene matrix. Thermogravimetric analysis showed good thermal stability for the prepared PPCNC. Differential... 

Hydrogels with remarkable hydrophilicity and tunable toughness are appealing materials to serve as superabsorbent polymers. However, chemically cross-linked hydrogels often suffer from low toughness regardless of their considerable swelling, restricting their widespread applications. In comparison, the network of physically cross-linked hydrogels can be regulated to meet both a high swelling ratio and considerable toughness. Here, we develop superabsorbent and tough hydrophobic associated hydrogels using terpolymerization of poly acrylic acid (PAA), polyacrylamide (PAM), and lauryl methacrylate (LMA) within the micelles formed by sodium dodecyl sulfate (SDS) surfactant. To this end, various... 

Molybdenum oxide nanostructures were synthesized utilizing the solution combustion method where the ammonium molybdate powder and an organic additive were used as precursors. Different organic additives including ethylene diamine tetraacetic acid (EDTA), polyethylene glycol 200 (PEG 200), sorbitol and urea were used as surfactants in order to investigate the effect of additive structure on morphology and particle size of products. Also various reaction parameters such as the additive/Mo molar ratio, concentration of metal ion in solution, pH of the reaction, and temperature of the synthesis media were changed to study effects on product morphology and size. Outcomes were characterized by... 

A mixture of MgO and graphite with a molar ratio (1:1) was subjected to planetary ball milling for 1, 2, 4, and 8 h with the intention of enhancing carbothermic reduction reaction of MgO during subsequent thermal treatment. Unmilled and milled mixtures were characterized using a combination of X-ray diffraction (XRD) analysis, Raman spectroscopy, scanning electron microscopy (SEM), surface area analysis (SSA), and thermogravimetric analysis (TGA). The reduction reaction of milled samples occurred at lower temperature than that of the unmilled sample. A longer milling time engenders a lower reaction temperature. These results are attributable to the increased interfacial area of the sample... 

Novel self-supported Mgy(CuxNi0.6-xMn0.4)1-yFe2O4 with (y = 0, 0.05, 0.1, 0.15, and x = 0, 0.15, 0.3, 0.45, 0.6) oxygen carriers (OCs) are synthesized through the co-precipitation method. The synthesized OCs’ properties are characterized by X-ray powder diffraction (XRD), Raman spectra, transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and Thermogravimetric Analysis (TGA). The synthesized OCs are assessed in Chemical Looping Steam Methane Reforming (CL-SMR) process subject to different mesh sizes, reaction temperatures, Steam/Carbon... 

The self-supported CuxNi0.6-xMn0.4Fe2O4 oxygen carrier (x = 0.1–0.5) is synthesized to be applied in the chemical looping steam methane reforming (CL-SMR) process through the synthesized co-precipitation method. The response surface methodology (RSM) based on the Box–Behnken model is adopted to evaluate the effects of independent variables on the functionality of responses as well as predicting the best response volume. In this method, the variables consisting of reaction temperature (550–700°C), oxygen carrier (OC) loading percentage (0.1–0.5), steam-to-CH4 ratio (S/C), (1.5–3.5), and redox cycles’ count (10–24) and the responses consisting of hydrogen (H2) production yield, CH4 conversion... 

Linear-dendritic triblock copolymers of linear poly(ethylene glycol) and hyperbranched poly(citric acid) (PCA-PEG-PCA) were used as the reducing and capping agents to encapsulate gold and silver nanoparticles (AuNPs and AgNPs). PCA-PEG-PCA copolymers in four different molecular weights were synthesized using 2, 5, 10 and 20 citric acid/PEG molar ratios and were called A 1, A 2, A 3 and A 4, respectively. Nanoparticles were encapsulated simultaneously during the preparation process. AuNPs were simply synthesized and encapsulated by addition a boiling aqueous solution of HAuCl 4 to aqueous solutions of A 1, A 2, A 3 and A 4. In the case of silver, an aqueous solution of AgNO 3 was reduced... 

Heterogeneous solid catalysts comprising CaO and ZrO 2 mixed oxides with various Ca-to-Zr molar ratios were synthesized by means of coprecipitation method. These synthesized mixed oxide catalysts were used for the transesterification of waste cooking oil (WCO) as feedstock with methanol to produce biodiesel fuel (BDF) at 65 °C and 1 atm. The influences of Ca-to-Zr molar ratio, catalyst loading, methanol-to-oil molar ratio, and the reaction time on the BDF yield were carefully investigated. In addition, the stability of prepared solid catalysts was studied. These catalysts were characterized by using techniques of X-ray diffraction, X-ray florescence, X-ray photoelectron spectroscopy, surface...