Sharif Digital Repository

Computer base and simulation technique have been applied for modeling the semi-solid die filling and part of the solidification process of aluminum A356 alloy. A fairly simple one-phase rheological model has been implemented into a fluid flow finite element software Procast, to solve the partial differential equations. This model is purely viscous nature and is implemented in the power law cut-off model of Procast. The constitutive parameters of this model were determined for a rheocast A356 alloy. Using these parameters and comparing the simulation results with experimental data showed good correlation with the model prediction. The designed die for rheocasting was applied for the... 

In this article a comprehensive numerical study is performed to compare the effect of fluid flow across a duct with various cross sectional shapes and with different velocities of the flow. Circular, elliptical and rectangular cross sections have been chosen for the ducts and air flows across them with four values of low Reynolds numbers in the range of Re = 1 to Re = 1000. Continuity and momentum equations with proper boundary conditions are solved in two dimensions. Streamlines, pressure distribution and Velocity profiles are obtained and creation of vortices, boundary layers, separation region, wake region, reattachment point and stagnation points are studied in detail and the results are... 

This study investigated the lake–aquifer hydraulic interactions in Lake Urmia (LU) as the second largest hypersaline lake in the world. Due to the scarcity of hydrogeological data required for modelling, a method based on Darcy’s Law and lake water budget was used to quantify the lake–aquifer interaction. Long-term ground- and satellite-based hydrological datasets over the time frame 2001–2019 were used. Results indicate that the groundwater flux between LU and the aquifers controls 18.74 ± 1.67% of the lake’s water storage. While 10 out of 14 adjacent aquifers recharge LU at a rate of less than 180 m3/m.month, one phreatic aquifer recharges the LU up to 1400 m3/m.month. Two aquifers are... 

The Computational fluid dynamics (CFD)–discrete element method (DEM) numerical simulation may be applied to predict the hydrodynamic behavior of dense particle–fluid flows. The main drawback of this simulation is the long computational time required owing to the large number of particles and the minute time-step required to maintain a stable solution. In this work, a new method to improve the efficiency and accuracy of CFD–DEM simulations is presented. The particle stiffness coefficient is used as a flexible parameter to improve the accuracy and efficiency of the model. The particle concentration distribution results are compared with experimental one’s to derive the optimum effective... 

The particle shape is an important factor playing critical role in evaluation of the interactions between particles in high-concentration particle-fluid flows. In this paper, the well-known multisphere (MS) approximation approach and the novel rolling resistance approach are utilized to examine their performance in order to simplify the generalized shaped particle’s interactions within the framework of discrete element method (DEM) and computational fluid dynamics (CFD). The performance of two approaches are compared with the perfect particle’s shape geometry, for the limited cases of cubic-shaped and disk-shaped particle flows in a horizontal well drilling process as a reference scenario.... 

Production from gas condensate reservoirs requires precise determination of reservoir fluid properties along with their positive impact on real reservoir performance evaluation and fluid in place volume calculation. This fact is particularly important because liquid drop out phenomena occurs as a result of pressure drop due to fluid production and condensate remains in reservoir [Mohebzadeh, 2005. In this study the challenges and problems of fluid phase behavior simulation in southern Iranian retrograde gas condensate reservoirs is discussed. Most of the problems and challenges are inaccuracy of equation of states near the critical point, special conditions and produced fluid flow... 

Field evidence indicates that the thermal and chemical regimes in wellbore considerably affect the wellbore stability. This study presents a general coupled model for transport of solute, solvent and heat including their combined effects on the wellbore stability. Optimization of drilling fluid parameters is crucial for wellbore stability analysis particularly in high pressure-high temperature environments. The coupled effects of chemical potential and temperature gradients on fluid flow significantly change the pore pressure and stress around a borehole. The effects of various parameters such as mud weight, solute concentration gradient, shale properties, and temperature gradient on... 

During the well drilling process, particles are produced in different shapes. The shape of particles can influence the characteristics of particles transport process. The aim of this work is to analyze the effects of particle shape on the transportation mechanism. For this purpose, a three-dimensional model is prepared for simulation of particle transportation with spherical and non-spherical shapes, during deviated well drilling. The motion of particles and the non-Newtonian fluid flow are simulated via discrete element method and CFD, respectively. The two-way coupling scheme is used to incorporate the effects of fluid-particle interactions. Three different samples of non-spherical shapes... 

Steady-state convective heat transfer around a circular cylinder embedded in porous media is studied in the range of low and moderate Peclet numbers less than 40. The cylinder is at constant temperature and the Darcy model is used for the analysis of fluid flow and heat transfer in porous media. The governing equations are discretised using finite volume approach based on staggered grids. The powerlaw scheme is used in the numerical solution and a SIMPLE-like algorithm is developed and used in the solution process. It is found that the numerical algorithm is sufficiently efficient in the range of Peclet numbers less than 40. Parametric studies are done for better understanding of the porous... 

The particle shape is an important factor playing critical role in evaluation of the interactions between particles in high-concentration particle-fluid flows. In this paper, the well-known multisphere (MS) approximation approach and the novel rolling resistance approach are utilized to examine their performance in order to simplify the generalized shaped particle’s interactions within the framework of discrete element method (DEM) and computational fluid dynamics (CFD). The performance of two approaches are compared with the perfect particle’s shape geometry, for the limited cases of cubic-shaped and disk-shaped particle flows in a horizontal well drilling process as a reference scenario.... 

The secondary flow of PTT fluids in rectangular cross-sectional plane of microchannels under combined effects of electroosmotic and pressure driving forces is the subject of the present study. Employing second-order central finite difference method in a very refined grid network, we investigate the effect of electrokinetic and geometric parameters on the pattern, strength and the average of the secondary flow. In this regard, we try to illustrate the deformations of recirculating vortices due to change in the dimensionless Debye–Hückel and zeta potential parameters as well as channel aspect ratio. We demonstrate that, in the presence of thick electric double layers, significant alteration... 

The World Health Organization (WHO) in 2013 reported that more than seven million unexpected losses every year are credited to air contamination. Because of incredible adaptability and expense viability of fibrous filters, they are broadly used for removing particulates from gasses. The influence of appropriate parameters, e.g., the fiber arrangement, solid volume fraction (SVF or α), fluid flow face velocity (mean inlet velocity), and filter thickness (Ix), on pressure drop and deposition efficiency are researched. Furthermore, to study the effects of variation of the laminar flow regime and fiber’s cross-sectional shape on the deposition of particles, only a single square fiber has been... 

The current study investigates the conjugate heat transfer characteristics for laminar flow in backward facing step channel. All of the channel walls are insulated except the lower thick wall under a constant temperature. The upper wall includes a insulated obstacle perpendicular to flow direction. The effect of obstacle height and location on the fluid flow and heat transfer are numerically explored for the Reynolds number in the range of 10 ≤ Re ≤ 300. Incompressible Navier-Stokes and thermal energy equations are solved simultaneously in fluid region by the upwind compact finite difference scheme based on flux-difference splitting in conjunction with artificial compressibility method. In... 

The relation between porosity and permeability parameters in carbonated rocks is complicated and indistinct. Flow units are defined with aim of better understanding reservoir unit flow behavior and relation between porosity and permeability. Flow units reflect a group of rocks with same geological and physical properties which affect fluid flow, but they do not necessarily coincide with boundary of facies. In each flow unit homogeneity of data is preserved and this homogeneity fades in the boundaries. Here, in this study, three methods are used for identification of flow units and estimation of average porosity and permeability in three wells of Tabnaak gas field located in south of Iran.... 

The bronchial tree plays a main role in the human respiratory system because the air distribution throughout the lungs and gas exchange with blood occur in the airways whose dimensions vary from several centimeters to micrometers. Organization of about 60,000 conducting airways and 33 million respiratory airways in a limited space results in a complex structure. Due to this inherent complexity and a high number of airways, using target-oriented dimensional reduction is inevitable. In addition, there is no general reduced-order model for various types of problems. This necessitates coming up with an appropriate model from a variety of different reduced-order models to solve the desired... 

The bronchial tree plays a main role in the human respiratory system because the air distribution throughout the lungs and gas exchange with blood occur in the airways whose dimensions vary from several centimeters to micrometers. Organization of about 60,000 conducting airways and 33 million respiratory airways in a limited space results in a complex structure. Due to this inherent complexity and a high number of airways, using target-oriented dimensional reduction is inevitable. In addition, there is no general reduced-order model for various types of problems. This necessitates coming up with an appropriate model from a variety of different reduced-order models to solve the desired... 

One of the most popular models that has been applied to predict the fluid velocity inside the fracture with impermeable walls is the cubic law. It highlights that the mean flux along the fracture is proportional to the cubic of fracture aperture. However, for a fractured porous medium, the normal and tangential interface conditions between the fracture and porous matrix can change the velocity profile inside the fracture. In this paper, a correction factor is introduced for flow equation along the fracture by imposing the continuity of normal and tangential components of velocity at the interface between the fracture and porous matrix. As a result, the mean velocity inside the fracture... 

Among numerous methods which have been employed to reinforce the thermal efficiency in many systems, one is the thermal radiation which is a mode of heat transfer. Another way to improve the thermal efficiency is the utilization of the porous media. The present work includes the study of micropolar flow with allowance for thermal radiation through a resistive porous medium between channel walls. The governing coupled partial differential equations representing the flow model are transmuted into ordinary ones by using the suitable dimensionless coordinates, and then, quasi-linearization is employed to solve the set of relevant coupled ODEs. Effects of physical parameters on the flow under... 

Among numerous methods which have been employed to reinforce the thermal efficiency in many systems, one is the thermal radiation which is a mode of heat transfer. Another way to improve the thermal efficiency is the utilization of the porous media. The present work includes the study of micropolar flow with allowance for thermal radiation through a resistive porous medium between channel walls. The governing coupled partial differential equations representing the flow model are transmuted into ordinary ones by using the suitable dimensionless coordinates, and then, quasi-linearization is employed to solve the set of relevant coupled ODEs. Effects of physical parameters on the flow under... 

A comprehensive study was performed to analyze the unsteady laminar flow characteristics around a porously covered, a fully porous, and a solid squared section cylinder located in the middle of a plane channel. In order to simulate fluid flow inside porous media and porous–fluid interface accurately (minimizing modeling error), the porous region was analyzed in pore scale, using LBM. Additionally, to minimize the LBM-related compressibility error through the porous region, a multi-block multiple relaxation time lattice Boltzmann method (MRT-LBM) was used. Also, to decrease CPU time, a Navier–Stokes flow solver, based on finite volume method and SIMPLE algorithm, was coupled with MRT-LBM to...