Sharif Digital Repository

This paper focuses on multi-objective optimisation (MOO) to optimise the planar solid oxide fuel cell (SOFC) stacks performance using a genetic algorithm. MOO problem does not have a single solution, but a complete Pareto curve, which involves the optional representation of possible compromise solutions. Here, two pairs of different objectives are considered as distinguished strategies. Optimisation of the first strategy predicts a maximum power output of 108.33 kW at a breakeven per-unit energy cost of 0.51 $/kWh and minimum breakeven per-unit energy cost of 0.30 $/kWh at a power of 42.18 kW. In the second strategy, maximum efficiency of 63.93%at a breakeven per-unit energy cost of 0.42... 

Functionalized magnetic core-zeolitic shell nanocomposites were prepared via hydrothermal and precipitation methods. The products were characterized by vibrating sample magnetometer, X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, and transmission electron microscopy analysis. The growth of mordenite nanocrystals on the outer surface of silica-coated magnetic nanoparticles at the presence of organic templates was well approved. The removal performance and the selectivity of mixed metal ions (Pb2+ and Cd2+) in aqueous solution were investigated via the sorption process. The batch method was employed to study the sorption kinetic,... 

In this study, the prospects of energy efficiency potential, clean development mechanism (CDM) and carbon income up to and beyond 2012 are investigated in the petrochemical industries of Iran as a major oil-producing country. This paper is to address four questions of: (1) the GHGs emission in Iranian petrochemical complexes, (2) the most energy-consuming processes, (3) units with the highest energy efficiency potentials and (4) potentials of CDM or similar carbon projects based on post-2012 scenarios. The petrochemical processes are investigated in two categories of non-polymeric and polymeric productions. Based on capital expenditure, economic saving, simple payback period, CO2 equivalent... 

In this work the application of a modified surface nano zero valent iron (NZVI) as bimetallic Fe/Cu particles to remove high concentration of NO3--N through packed sand column has been studied. Dispersed nano-Fe/Cu particles has been synthesized in water mixed ethanol solvent system (1:4v/v) and described by XRD pattern, TEM and SEM images and BET analyze. Batch experiments have been conducted to investigate the effect of percentage coating of Fe0 by Cu on the nitrate removal. Research on packed sand column (120cm length, 6.5cm inner diameter) has been done under conditions of Nano-Fe/Cu concentration (2, 5, and 8gl-1 of solution), high initial NO3--N concentration (100, 200, and 300mgl-1)... 

This paper introduces a new hybrid electro membrane bioreactor (HEMBR) for reverse osmosis (RO) pretreatment and advanced treatment of effluent by simultaneously integrating electrical coagulation (EC) with a membrane bioreactor (MBR) and its performance was compared with conventional MBR. Experimental results and their statistical analysis showed removal efficiency for suspended solids (SS) of almost 100% for both reactors. HEMBR removal of chemical oxygen demand (COD) improved by 4% and membrane fouling was alleviated according to transmembrane pressure (TMP). The average silt density index (SDI) of HEMBR permeate samples was slightly better indicating less RO membrane fouling. Moreover,... 

Stay and guide vanes (distributor) are essential parts of a turbine. They are used to control the flow rate and to appropriately transfer the flow momentum to the runner. In this work, flow through the distributor is analyzed. For various Boundary Conditions (BC) and different configurations, threedimensional flows in the distributor of a Francis turbine are evaluated and compared with each other. The numerical simulations were carried out using Fluent software and the results were validated with a GAMM Francis turbine, where the geometry and detailed best efficiency measurements were publically available. In these simulations, the flow was assumed to be steady and the effect of turbulence... 

Circulation is created in some parts of settling tanks. It can increase the mixing level, decrease the effective settling, and create a short circuiting from the inlet to the outlet. All above-mentioned phenomena act in such a way to decrease the tank's hydraulic efficiency, which quantitatively shows how flow within the tank is uniform and quiet. So, the main objective of the tank design process is to avoid forming the circulation zone, which is known as the dead zone. Prediction of the flow field and size of the recirculation zone is the first step in the design of settling tanks. In the present paper, the non-linear k - ε turbulence model is used for predicting the length of the... 

The main objective of the present study was to develop a valid and appropriate model to evaluate companies' efficiency and environmental performance, concerning health, safety, and environmental management system principles. The proposed model overcomes the shortcomings of the previous models developed in this area. This model has been designed on the basis of a mathematical method known as Data Envelopment Analysis (DEA). In order to differentiate high-performing companies from weak ones, one of DEA nonradial models named as enhanced Russell graph efficiency measure has been applied. Since some of the environmental performance indicators cannot be controlled by companies' managers, it was... 

Several methods have been proposed in data envelopment analysis (DEA) for measuring efficiency in problems with interval or ordinal data. In this study, we review the weaknesses and drawbacks of these methods and show how converting ordinal or interval data into precise data can lead to violations of established DEA axioms. One of the axioms violated by these conversion processes is the inclusion of observations axiom, which requires a consistent definition of the production possibility set. We describe the special properties of ordinal and interval data together with their effect on the DEA-based rankings using a theorem and an example. We also propose a new algorithm and apply random... 

In this study, degradation of trichloroethylene (TCE), a chlorinated hydrocarbon, using starch supported Fe/Ni nanoparticles was investigated. The scanning electron microscope images showed applying water soluble starch as a stabilizer for the Fe/Ni nanoparticles tended to reduce agglomeration and discrete particle. Also the mean particle diameter reduced from about 70 nm (unsupported Fe/Ni nanoparticle) to about 30 nm. Effects of three key independent operating parameters including initial TCE concentration (10.0-300.0 mg L-1), initial pH (4.00-10.00) and Fe0 dosage (0.10-2.00) g L-1 on TCE dechlorination efficiency in 1 hour were analysed by employing response surface methodology (RSM).... 

This study investigated the removal of triethylamine using a biotrickling filter. The influence of affecting parameters, such as height and recirculation liquid rate (VL) on contaminant removal efficiency, was examined in detail. The results demonstrated that in the constant empty bed residence time (EBRT), when VL was increased, the removal efficiency (RE) increased. Also, for a specific VL, increasing EBRT could also increase RE values. However, it seems that an increasing VL is a more cost-effective way to enhance RE as compared to an increasing EBRT. The obtained outcomes represented that for a constant EBRT, an increase in inlet loading (IL) could decrease RE. For lower ILs, the removal... 

OFDM is an effective multicarrier transmission technique with one primary disadvantage; it suffers from high Peak-to-Average Power Ratio (PAPR). Although clipping and filtering is a simple and effective method for PAPR reduction, it makes in-band and out-of-band noise, which degrades the bit error rate performance and spectral efficiency. Publications on this subject show that clipped samples could be reconstructed at the receiver by using oversampled signal and bandwidth expansion. By building on published literature, this paper aims to achieve a low-complexity method. The proposed method has complexity order of O(L2) to solve linear system, where L indicates the number of clipped samples.... 

In this study, a novel idea of storing the latent heat of condensing vapor in solar stills by means of phase change materials (PCMs) as a thermal storage is experimentally investigated. During the daytime, the generated water vapor by the solar energy, is conducted to an external condenser filled with PCM to be condensed. The wasted latent heat is absorbed by PCM and thereby stored. It is worth noting that there is no direct contact between the saline water and the PCM, therefore, the solar energy is not directly stored in the PCM. In the evening, the energy stored in the PCM is transferred as heat to the saline water by heat pipes and enables the desalination process to continue. Several... 

In the present work, a micro combustor for thermophotovoltaic (TPV) devices is proposed which is included a U-shaped microtube in a box with a secondary fluid in space between U-shaped microtube and box walls. By utilizing the three-dimensional CFD model, combustion characteristics of the premixed lean hydrogen-air mixture in the present micro combustor are studied numerically with detailed chemistry and transport taking into account heat transfer through the wall. The results show that the establishment of secondary flows and better preheating in the curved tubes is caused the flammability limits to be at least four times in comparison with straight tubes. Combustion characteristics are... 

Engines that extract energy from low-grade heat sources, e.g., from other processes, have received considerable attention recently. The use of Fluidyne, which is a liquid piston Stirling engine, is quite popular. Herein, we explore the use of liquid-to-vapor phase change in a Fluidyne. This provides two considerable differentiators; (1) exploitation of very low temperature difference ΔT≈30 K, and (2) relatively low temperature ΔT≈330 K heat sources, for producing mechanical work, and thus electrical energy. The influence of three operating parameters, i.e., input heat flux, working fluid, and filling ratio, on the performance of the engine was characterized. Their optimum values, which yield... 

Data envelopment analysis (DEA) is a mathematical programming approach to efficiency measurement in many applications. In some real-life applications, three situations are established. First, the input and output data are imprecise. Second, it is necessary to use the weight restrictions in order to consider the management view. Third, the decision maker needs to find the best decision making units (DMUs). In the traditional DEA model, it is supposed that the input and output data are precise and the weights are free. This paper proposes a new mixed integer assurance-region imprecise DEA (AR-IDEA) model to find the best DMU by solving only one model. Also, a new algorithm is developed to find... 

Several methods have been proposed in data envelopment analysis (DEA) for measuring efficiency in problems with interval or ordinal data. In this study, we review the weaknesses and drawbacks of these methods and show how converting ordinal or interval data into precise data can lead to violations of established DEA axioms. One of the axioms violated by these conversion processes is the inclusion of observations axiom, which requires a consistent definition of the production possibility set. We describe the special properties of ordinal and interval data together with their effect on the DEA-based rankings using a theorem and an example. We also propose a new algorithm and apply random... 

This study develops a photosynthetic microalgae microbial fuel cell (PMMFC) engaged Chlorella vulgaris microalgae to investigate effect of light intensities and illumination regimes on simultaneous production of bioelectricity, biomass and wastewater treatment. The performance of the system under different light intensity (3500, 5000, 7000 and 10,000 lx) and light/dark regimes (24/00, 12/12, 16/8 h) was investigated. The optimum light intensity and light/dark regimes for achieving maximum yield of PMMFC were obtained. The maximum power density of 126 mW m−3, the coulombic efficiency of 78% and COD removal of 5.47% were achieved. The maximum biomass concentration of 4 g l−1 (or biomass yield... 

Currently, the HIFU (High-Intensity Focused Ultrasound) therapy method is known as one of the most advanced surgical techniques of tumor ablation therapy. Simulation of the non-linear acoustic wave and tissue interaction is essential in HIFU planning to improve the usefulness and efficiency of treatment. In this paper, linear, thermoviscous, and nonlinear equations are applied using two different media: liver and water. Transducer power of 8.3-134 Watts with the frequency of 1.1 MHz is considered as the range of study to analyze the interaction of wave and tissue. Results indicate that the maximum focal pressure of about 0.5-4.3 MPa can be achieved for transducer power rates of 8.3 to 134 W.... 

This paper presents a new combined method for accurate upscaling of two-phase displacements in highly heterogeneous reservoirs. The method has the capability to retain its high performance for various flow regimes, from viscous to gravity dominant displacements, without the need for further modifications and computational steps. Two different grids are incorporated for simulation. The grid on fine scale is used to recognize the complicated physics of flow which depends on dominated driving forces and their interaction with heterogeneity. However, to achieve a fast simulation, the global flow calculation is performed on the coarse scale grid using upscaled equivalent properties. The...