Sharif Digital Repository

It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent... 

A brass vortextube is used to carry out a series of experiments. The main objective of the present research is to investigate the separation performances of a vortex tube (VT) for a hydrocarbon mixture. Examination is also applied to study the effects of nozzle intakes number and cold fraction on the gas species separation at specific inlet pressure 236.37 kPa in a VT with two gas mixtures (LPG as a hydrocarbon mixture and LPG-N2). A two-dimensional computational fluid dynamic (CFD) model simulation of a VT is presented. CFD code after validation is also applied to investigate the role of cold fraction and nozzle intakes number on the gas species separation. The highly rotating flow field... 

One of the most important operating parameters which affects the performance and efficiency of active solar stills is brine depth. In all of the previous experimental or theoretical studies, effects of water depth were investigated during only the first 24-hour period (or even shorter periods) of the operation of active solar stills. In other words, only the first day was taken into account. However, the production of an active solar still depends on several parameters such as brine temperature at sunrise (initial temperature), which are all affected by the depth variation after the first day of operation. However, the present research experimentally investigates the long-term effects of... 

Regarding the importance of rheological properties of water based drilling fluids, the effects of silica nanospheres, multiwall carbon nanotubes (MWCNTs) and two types of their hybrid, i.e. H1 (80 wt.% silica nanosphere/20 wt.% MWCNT) and H2 (50 wt.% silica nanosphere/50 wt.% MWCNT) on the viscosity and density of distilled water were investigated. According to the results, viscosity and density of the nanofluids increased with the concentration, while they were reduced by increasing the temperature. At high concentrations, the least increase in the viscosity of distilled water by adding the nanomaterials is related to H2 (8.2% increase at 1.0 wt.%). Likewise, the optimum operating... 

A new generalized and non-group contribution method has been developed to predict critical temperature (Tc), critical pressure (Pc), critical volume (Vc) and acentric factor (ω) for pure substances and petroleum fractions based on two types of input parameters. This method can take either refractive index and molecular weight or refractive index and normal boiling point as its input. Since refractive index cannot be obtained for an unknown mixture (petroleum fraction), in order to apply the proposed method for petroleum fractions, refractive index is converted to mass density at 293K using the one-third rule. Moreover, the proposed correlation is capable of predicting the properties using... 

To exert the optimum effect, the chemical exchange process to boron isotope separation was investigated. In this enrichment method the distillation of dimethyl ether-boron trifluoride complex, which was one of the most efficient industrial methods for purification of isotope boron-10, was optimized. In chemical exchange process of boron isotopes separation two chemical reactions occur. The first one is the decomposition reaction that is an endothermic reaction. The second one is the exchange reaction that is a pyrogenic reaction. With increasing temperature, the decomposition reaction is speeded while the exchange reaction is slowed down. Affecting on both decomposition and exchange... 

In this paper we derive a new upper bound on the quantum key distillation capacity. This upper bound is an extension of the classical bound of Gohari and Anantharam on the source model problem. Our bound strictly improves the quantum extension of reduced intrinsic information bound of Christandl et al. Although this bound is proposed for quantum settings, it also serves as an upper bound for the special case of classical source model, and may improve the bound of Gohari and Anantharam. The problem of quantum key distillation is one in which two distant parties, Alice and Bob, and an adversary, Eve, have access to copies of quantum systems A, B, E respectively, prepared jointly according to... 

A twodimensional model, based on conservation of mass, momentum and energy equations, is represented in this paper in which the coke combustion process, for iron ore sintering in a packed bed, is simulated numerically. The aforementioned packed bed consists of iron ore, coke, limestone and moisture. The main objective of iron ore sintering is producing resistant agglomerates which can be used in blast furnaces. For this purpose, the sinter mixture is partially melted in high temperature and finally molten is allowed to cool. The molten production and subsequently, the solidification process are totally dependent on composition and components of mixture. Changes in bed porosity, caused by... 

We propose a scheme for distillation of free bipartite entanglement from bipartite bound entangled states. The crucial element of our scheme is an ancillary system that is coupled to the initial bound entangled state via appropriate weak measurements. We show that in this protocol free entanglement can be always generated with nonzero probability by using a single copy of the bound entangled state. We also derive a lower bound on the entanglement cost of the protocol and conclude that, on average, applying weaker measurements results in relatively higher values of free entanglement as well as lower costs  

The biodegradability rates of two different kinds of polyethylene bonded with corn and potato starch are studied in this paper. While it is usual to use soil as the environment for biodegradation, an aerated sludge tank was used in this studywhich offers a richermicrobialmediumand increases the rate of biodegradation. The biodegradability is determined by two ways: first, comparing differences in the weight change of two samples, one placed inside distilled water and the other placed in aerated sludge tank. Second test for biodegradation is by examination of FTIR spectroscopy. Through FTIR spectroscopy, the biodegradability rate and reduction in some of the existing bonds in polymer before... 

Biosurfactant production through a fermentation process involving the biodegradation of soybean oil refining wastes was studied. Pseudomonas aeruginosa MR01 was able to produce extracellular biosurfactant when it was cultured in three soybean oil refinement wastes; acid oil, deodorizer distillate and soapstock, at different carbon to nitrogen ratios. Subsequent fermentation kinetics in the three types of waste culture were also investigated and compared with kinetic behavior in soybean oil medium. Biodegradation of wastes, biosurfactant production, biomass growth, nitrate consumption and the number of colony forming units were detected in four proposed media, at specified time intervals.... 

Mechanical alloying and sintering were used to fabricate nanostructured Ti6Al4V scaffolds of highly controllable pore geometry and fully interconnected porous network. Elemental powders were milled for different periods of time (10, 20, 30, 40 and 60 h), mixed with 40-60 vol.-% of 200-400 μm cuboidal NaCl, compacted at 500-600 MPa and sintered according to single or double stage heat treatment regimes at 790 and 950°C under vacuum. After sintering, the samples were soaked in distilled water to washout the NaCl. Foamy microstructures were obtained showing well shaped biopores and fragmentary embedded micropores. The shape of initial NaCl was copied into the biopores which had highly... 

Synthesis of dextran-graft-poly(hydroxyethyl methacrylate) gels as a new fluoride biosorbent was considered in this work. For this propose, the Taguchi experimental design method was used for optimizing the synthetic conditions of the gels to reach high level of fluoride absorbency. The effects of three main parameters including concentrations of monomer (hydroxyethyl methacrylate), crosslinking agent (ethylene glycol dimethacrylate), and initiator (ammonium persulfate) on the final properties of the prepared gels were investigated. The proposed mechanism for grafting and chemically crosslinking reactions was proved with equilibrium water absorption, Fourier-transformed infrared, scanning... 

In this study electrical properties of different water liquids at frequency range of 100-2000 Hz are investigated by using the short invasive and non-invasive cylindrical capacitive sensors (CCSs). Operation of the capacitance measurement module for such probes is based on the auto balancing bridge method. Comparison of the measured capacitances and measured resistances for different water liquids shows decrease by increasing the frequency. In another study the dielectric constant of distilled water, mineral water, tap water and salt water are measured. The effects of the frequency on the resistivity, permittivity and conductance of the different water liquids are also investigated  

As membrane distillation (MD) is an under-developed separation process, specific membranes for MD applications are not yet commercially available. Therefore, microporous polymeric membranes made of hydrophobic materials fabricated for microfiltration purposes are usually used for MD applications. Characterization of such kind of membranes is important in order to achieve a better in-depth understanding of their performance and to fabricate specific membranes for MD process. One of the emerging characterization methods is atomic force microscopy (AFM) analysis. AFM is a newly developed high-resolution method that is useful for studying the surface topography of various types of membranes, and... 

In this study, a hybrid of silica nanosphere/multiwall carbon nanotube (MWCNT) has been synthesized by wet chemical method at room temperature. The effect of MWCNTs, silica nanospheres and hybrid nanostructures (80% silica nanosphere/20% MWCNT and 50% silica nanosphere/50% MWCNT) on the thermal conductivity of distilled water has been investigated. SDBS was used as the dispersant to stabilize nanomaterials in the aqueous suspension and its concentration was 1.5 times of the concentration of nanomaterials. As results show, by increasing the concentration of nanomaterials, effective thermal conductivity of nanofluids increased. The most and the least enhancement in the effective thermal... 

An experimental based ANN model is constructed to describe the performance of vacuum membrane distillation process for desalination in different operating conditions. The vacuum pressure, feed inlet temperature, concentration of the feed salt aqueous solution, and feed flow rate are the input variables of this process, while response is the permeate flux. The neural network approach is capable for modeling this membrane distillation configuration. The application of Genetic Algorithm to optimize the ANN model parameters was also examined. This is an abstract of a paper presented at the CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th... 

The present work investigates the thermal performance of a five turn Open Loop Pulsating Heat Pipe (OLPHP). The effects of working fluid namely water and ferrofluid, heat input, ferrofluid concentration, charging ratio, and orientation will be considered. Experimental results show that using ferrofluids can enhance the thermal performance in comparison with the case of distilled water. In addition, applying a magnetic field on the OLPHP charged with ferrofluid reduces its thermal resistance. Variation of the ferrofluid concentration results in different thermal performance of the OLPHP. Best charging ratio for the distilled water and ferrofluid without magnetic field is 60 % in most of the... 

Sweeping gas membrane distillation process was studied using flat sheet hydrophobic PTFE membrane. The effects of operating parameters, including feed temperature, feed flow rate, sweeping gas flow rate, and feed concentration on the permeate flux, were determined. The feed temperature significantly influenced the permeate flux. Increasing the feed temperature increased the permeate flux. The increase of feed concentration caused to reduce the permeate flux due to the increase of concentration polarization effect and reduction of vapor pressure difference. Sweeping gas flow rate led to increase the permeate flux due to reduction of vapor pressure in the permeate side. Higher air flow rate... 

An approach to assess feasibility and determine the feasible range of operating parameters for double-feed reactive distillation columns is put forward. It is based on the combination of analysis of the pinch point maps for the middle-section in compositional space and an efficient shortcut design method. The existence of the liming bounds on operating parameters is observed. The methodology is illustrated by the production of methyl acetate and ethyl acetate. The analysis provides an efficient method to identify the most promising candidates of double feed reactive distillation columns and to study the design flexibility in terms of operating parameters. This is an abstract of a paper...