Sharif Digital Repository

Electrochemical oxidation of acetaminophen (N–acetyl–p–aminophenol) (1) has been studied in the presence of dimethylamine (2) as a nucleophile in aqueous solution, by means of cyclic voltammetry and controlled-potential coulometry. The results indicate the participation of electrochemically generated N-acetyl-p-quinoneimine (1a) in Michael reaction with dimethylamine (2). Based on ECE mechanism, the observed homogeneous rate constant (kobs) of the above mentioned reaction is estimated by comparing the experimental cyclic voltammograms with the digital simulated results. Further more; kinetics and mechanism of the reaction were studied with ab initio calculation, Monte Carlo and QM/MM... 

Sol-gel based solid-phase microextraction fibers supported by a stainless steel wire were fabricated and employed for GC-MS determination of oxadiargyl in real samples. The fibers were based on four compounds with different polarity: polar and non-polar (end-capped) poly(dimethylsiloxane) (PDMS), polyethylene glycol (PEG), and poly(ethylene-propyleneglycol)-monobutyl ether (UCON). For this purpose, the surface of the stainless steel was initially modified by (3-mercaptopropyl) trimethoxysilane. The results of the modification procedure were evaluated by cyclic voltammetry and energy dispersive X-ray (EDX) spectroscopy. After the modification, four different sol-gel based SPME fibers with... 

The first usage of dihexadecyl hydrogen phosphate (DHP)-modified highly oriented multi-walled carbon nanotube (MWCNTs) forests in a sensor configuration was developed to investigate the electrochemical oxidation and determination of simvastatin (SV) in pharmaceutical dosage forms. Synthesis of well-aligned MWCNTs on a conductive Ta substrate by catalytic vapor deposition technique using a common chemical, ethylenediamine, and without being plasma-aided was reported. The electrochemical behavior and oxidation of SV at the aligned MWCNTs/DHP/Ta electrode were discussed in detail through cyclic voltammetry and differential pulse voltammetry. This modified electrode showed considerably higher... 

Titanium anodes coated with noble metal oxides are widely used in chlorate industry. In fact, these anodes are dimensionally stable. In this article, the electrochemical characteristics of the ternary oxide coating created by sol-gel on titanium, which consisted of Ti, Ru and Ir, were investigated in the number of different layers. The electrochemical properties of anodes, morphology of samples, and phase analysis were investigated respectively by cyclic voltammetry and polarization measurements, Field Emission Scanning Electron Microscope (FESEM) and XRD. The result indicated that the application of the more layer number increases the rate of chlorine evolution. Also, The morphology of the... 

RGO/TiO2NTs/Ti electrodes with high surface area and good capacitive characteristics were prepared by simple electrochemical reduction of graphene oxide (GO) onto the previously formed TiO2 nanotubes. Microstructure studies show that reduced graphene oxide (RGO) having high surface area has been deposited onto the TiO2NT arrays. The electrochemical capacitive behaviors of the obtained electrodes were investigated by cyclic voltammetry (CV), galvanostatic charge–discharge studies, and electrochemical impedance spectroscopy (EIS) in 1 M H2SO4 solution. The electrochemical data demonstrated that the electrodes displayed specific capacitance of 410 F g−1 at the current density of 50 A g−1 and... 

The screen-printed gold electrode (SPGE) modified with the formation of self-assembly monolayer (SAM) of cysteine (Cys) on gold-nanoparticles (Au nano) was utilized for rapid and simultaneous determination of tetracycline and cefixime antibiotics by square wave voltammetry (SWV). Electrochemical investigation and characterization of the modified electrode was achieved using cyclic voltammetry (CV) and scanning electron microscopy (SEM). A principal component artificial neural network (PCANN) with three layer back-propagation network was utilized for the analysis of the voltammogram data. It is possible to simultaneously determine the tetracycline and cefixime concentrations in the ranges of... 

Nanoporous/cracked structures of cobalt oxide (Co3O4) electrodes were successfully fabricated by electroplating of zinc–cobalt onto previously formed TiO2 nanotubes by anodizing of titanium, leaching of zinc in a concentrated alkaline solution and followed by drying and annealing at 400 °C. The structure and morphology of the obtained Co3O4 electrodes were characterized by X-ray diffraction, EDX analysis and scanning electron microscopy. The results showed that the obtained Co3O4 electrodes were composed of the nanoporous/cracked structures with an average pore size of about 100 nm. The electrochemical capacitive behaviors of the nanoporous Co3O4 electrodes were investigated by cyclic... 

Ruthenium oxide was coated on multiwalled carbon nanotubes (MWCNTs) to obtain nanocomposite electrode which has a good response to the pH. To synthesize this electrode, gold and cobalt were coated on a stainless steel 304 substrates, respectively, and then, vertically aligned carbon nanotubes were grown on the prepared substrates by chemical vapor deposition. Gold reduced activity of the stainless steel, while cobalt served as a catalyst for growth of the carbon nanotube. Ruthenium oxide was then coated on MWCNTs via sol-gel method. At last, different techniques were used to characterize the properties of synthesized electrode including scanning electron microscopy (SEM), transmission... 

A simple electrodeposition method is employed to construct a thin film modifier of palladium-gold nanoparticles (Pd-AuNPs) decorated multi-walled carbon nanotube (MWCNT) on the surface of glassy carbon electrode (GCE). Morphology and property of Pd-AuNPs-MWCNT have been examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Electrochemical performance of Pd-AuNPs-MWCNT/GCE for detection of ceftazidime (CFZ) has been investigated by cyclic voltammetry (CV). This nanostructured film modified electrode effectively exhibited enhanced properties for detection of ceftazidime (CFZ). The effects of various experimental variables such as, the amount of casted MWCNT,... 

The preparation of composite manganese dioxide (MnO2) nanoparticles in an ordered mesoporous carbon (CMK-3) matrix and its use for constructing a new wide-potential-window supercapacitor is reported. CMK-3 is prepared using mesoporous silica as a hard template and sucrose as carbon source. The different ratios of MnO2/CMK-3 composite is synthesized by impregnating CMK-3 with a Mn(NO3)2·4H 2O solution followed by annealing in nitrogen. Physical properties, morphology, and specific surface area were characterized by X-ray diffraction, transmission electron microscopy, and nitrogen sorption measurements, respectively. The electrochemical properties of the composite were studied by cyclic... 

A glassy carbon electrode (GCE) is modified with platinum nanoparticle (PtNPs) decorated multiwalled carbon nanotube (MWCNT). The modified electrode is applied for the determination of ceftriaxone (CFX) in the presence of lidocaine. Different methods were used to characterize the surface morphology of the modified electrode. The electrochemical behavior of CFX was investigated at GCE, MWCNT/GCE and PtNPs/MWCNT/GCE. A factorial-based response-surface methodology was used to find out the optimum conditions with minimum number of experiments. Under the optimized conditions, oxidation peak currents increased linearly with CFX concentration in the range of 0.01-10.00 μM with a detection limit of... 

We report improved performance of Li-ion polymer batteries through advanced gel polymer electrolytes (GPEs). Compared to solid and liquid electrolytes, GPEs are advantageous as they can be fabricated in different shapes and geometries; also ionic properties are significantly superior to that of solid and liquid electrolytes. We have synthetized GPE in form of membranes by trapping ethylene carbonate and propylene carbonate in a composite of polyvinylidene fluoride and N-methylpyrrolidinore. By applying phase-transfer method, we synthetized membranes with micro-pores, which led to higher ionic conductivity. The proposed membrane is to be modified further to have higher capacity, stronger... 

NiO-ZnO/TiO2NTs electrodes were synthesized by the electrodeposition of Zn-Ni onto TiO2 nanotubes, dealloying in a concentrated alkaline solution and finally calcination of the resulting Zn(OH)2-Ni(OH)2/TiO2NTs at 300 C. Morphology of the electrodeposited nanostructures was studied using scanning electron microscopy (SEM) while their electrochemical characterizations were carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The SEM analysis revealed the nanoporous/cracked structures of the NiO-ZnO/TiO2NTs obtained at the electroplating time of 20 min. The EIS studies showed that nanoporous/cracked structures of... 

Three-dimensional gold nanoelectrode ensembles (3D GNE) have proven to be promising nanoelectrodes by representing much higher sensitivity compared to both their 2D nanostructures and bulk counterparts. The sensitivity of 3D gold nanotubes (GNTs) fabricated through electrodeposition inside the pores of polycarbonate templates, was examined toward metronidazole (MTZ) as one of their pharmaceutical applications. The electrochemical behavior of MTZ at the 3D GNT-modified electrode was discussed in detail through cyclic voltammetry (CV) which suggested an irreversible reduction of nitro group to the corresponding hydroxylamine and a subsequently reversible redox peak for the corresponding... 

Ship-in-a-bottle complex of nickel(II) containing the ligand N,N′-bis(2,4-dihydroxyacetophenone)-2,2-dimethylpropandiimine (H 2{salnptn(4-OH)2}) has been synthesized in zeolite Y. The characteristics of the encapsulated complex are identified by the methods of EDX, SEM, XRD, FT-IR and cyclic voltammetry. A catalytic effect in the electrochemical oxidation of glucose, fructose and sucrose, and a blocking effect in stevioside oxidation are demonstrated on the Ni II{salnptn(4-OH)2}-Y/CPE. The effects of some parameters, such as potential scan rate and concentration of carbohydrates are investigated. The rate constants for the catalytic reaction (k′) of carbohydrates are also obtained. The... 

Wastewater of purified terephthalic acid (PTA) from a petrochemical plant was examined in a membrane-less single chamber microbial fuel cell for the first time. Time course of voltage during the cell operation cycle had two steady phases, which refers to the fact that metabolism of microorganisms was shifted from highly to less biodegradable carbon sources. The produced power density was 31.8 mW m-2 (normalized per cathode area) and the calculated coulombic efficiency was 2.05 % for a COD removal of 74 % during 21 days. The total removal rate of different pollutants in the PTA wastewater was observed in the following order: (acetic acid) > (benzoic acid) > (phthalic acid) > (terephthalic... 

A modified carbon paste electrode was prepared by incorporating the TiO2 nanoparticles in the carbon paste matrix. The electrochemical behavior of gallic acid (GA) is investigated on the surface of the electrode using cyclic voltammetry and differential pulse voltammetry. The surface morphology of the prepared electrode was characterized using the scanning electron microscopy. The results indicate that the electrochemical response of GA is improved significantly at the modified electrode compared with the unmodified electrode. Furthermore, the capabilities of electron transfer on these two electrodes were also investigated by electrochemical impedance spectroscopy. Under the optimized... 

Nickel-modified glassy carbon electrode (GC/Ni) prepared by galvanostatic deposition was used for the electrocatalytic oxidation of glucose in alkaline solutions where different electrochemical methods were employed. In cyclic voltammetry studies, in the presence of glucose an increase in the peak current of the oxidation of nickel hydroxide is followed by a decrease in the corresponding cathodic current. This suggests that the oxidation of glucose is being catalyzed through mediated electron transfer across the nickel hydroxide layer comprising nickel ions of various valence states. Under the chronoamperometric regime, the reaction followed a Cottrellian behavior and the diffusion... 

The electrochemical reduction of tinidazole (TNZ) is studied on gold-nanoparticle/carbon-nanotubes (AuNP/CNT) modified glassy carbon electrodes using the linear sweep voltammetry. An electrochemical procedure was used for the deposition of gold nanoparticles onto the carbon nanotube film pre-cast on a glassy carbon electrode surface. The resulting nanoparticles were characterized by scanning electron microscopy and cyclic voltammetry. The effect of the electrodeposition conditions, e.g., salt concentration and deposition time on the response of the electrode was studied. Also, the effect of experimental parameters, e.g., potential and time of accumulation, pH of the buffered solutions and... 

Nickel modified graphite electrodes (G/Ni) prepared by galvanostatic deposition were examined for their redox process and electrocatalytic activities towards the oxidation of methanol, ethanol, 1-propanol and 2-propanol in alkaline solutions. The methods of cyclic voltammetry (CV), chronoamperometry (CA) and impedance spectroscopy (EIS) were employed. In CV studies, the electrochemical response, peak current varied in the order of MeOH > EtOH > 1-PrOH > 2-PrOH. Under the CA regime, a higher catalytic rate constant obtained for methanol oxidation was in agreement with CV measurements. Lower charge transfer resistance was obtained for low carbon alcohols oxidation and significantly higher...