Sharif Digital Repository

Effective delayed neutron fraction βeff and neutron generation time Λ are important factors in reactor physics calculation and transient analysis. In the first stage of this research, these kinetics parameters have been calculated for two states of Tehran Research Reactor (TRR), i.e. cold (fuel, clad and coolant temperature 20 °C) and hot (fuel, clad and coolant temperature 65, 49 and 44 °C, respectively) states using MTR-PC computer code. The ratio of (βeff) i/(βeff)core plays an important role in reactivity accident analysis codes. This parameter and its contribution to effective delayed neutron fraction from each nucleus have been calculated in cold and hot reactor states. Uncertainty of... 

We consider the problem of massive matrix multiplication, which underlies many data analytic applications, in a large-scale distributed system comprising a group of worker nodes. We target the stragglers' delay performance bottleneck, which is due to the unpredictable latency in waiting for slowest nodes (or stragglers) to finish their tasks. We propose a novel coding strategy, named entangled polynomial code, for designing the intermediate computations at the worker nodes in order to minimize the recovery threshold (i.e., the number of workers that we need to wait for in order to compute the final output). We demonstrate the optimality of entangled polynomial code in several cases, and show... 

Gamma irradiation systems are used extensively in the industry in order to sterilize medical devices, disinfect hygienic products and increase the shelf life of agricultural products. The method of gamma irradiation is superior to the older methods of heat or chemical treatment because it is by far a simpler operation. In this method, only one parameter, the exposure time is controlled, whereas in the other mentioned methods five or six different parameters need to be controlled. The design of irradiation systems generally includes the size and the location of products, and the arrangement of source rack pencils. In order to optimize the design of the gamma irradiation systems, it is needed... 

Proton exchange membrane (PEM) fuel cell performance is directly related to the bipolar plate design and their channels pattern. Power enhancements can be achieved by optimal design of the type, size, or patterns of the channels. It has been realized that the bipolar plate design has significant role on reactant transport as well as water management in a PEM Fuel cell. Present work concentrates on improvements in the fuel cell performance by optimization of flow-field design and channels configurations. A three-dimensional, multi-component numerical model of flow distribution based on Navier-Stokes equations using individual computer code is presented. The simulation results showed excellent... 

In this study, a cryogenic distillation column has been designed and simulated via a computer code based on the theta method of convergence. The required thermodynamic properties are determined from the enhanced predictive Peng-Robinson (E-PPR 78) equation of state which has a good accuracy in predicting the corresponding thermodynamic properties of natural gas components. The combined code of distillation column/equation of state has been verified with that of another study. In the present study, the results are achieved by the constant molar over-flow and inclusion of energy equations assumptions. In order to have more accuracy in the results, the energy equations were considered in the... 

In the present paper, the light output distribution due to poly-energetic neutron/gamma (neutron or gamma) source was calculated using the developed MCNPX-ESUT-PE (MCNPX-Energy engineering of Sharif University of Technology-Poly Energetic version) computational code. The simulation of light output distribution includes the modeling of the particle transport, the calculation of scintillation photons induced by charged particles, simulation of the scintillation photon transport and considering the light resolution obtained from the experiment. The developed computational code is able to simulate the light output distribution due to any neutron/gamma source. In the experimental step of the... 

Compton imaging is an imaging technique in which Compton scattering is used to produce images from a gamma-ray source. Compton imaging systems are also known as Compton camera. The basic design of Compton imaging systems consists of two-position detectors that are sensitive to the position and energy scattered from gamma rays. Compton camera efficiency is defined as the fraction of photons entering the scatterer (disperse) detector that undergoes only one Compton scattering and is then photoelectrically absorbed in the absorber detector. In the present study, the efficiency of a Compton camera was investigated based on semiconductor detectors using the GEANT4 simulation toolkit. In this... 

In this research, effective delayed neutron fraction (βeff) and neutron generation time (A) of the Tehran Research Reactor (TRR) are calculated for different uranium enrichments from 14.84 w/o to 96.56 w/o U 235 in two states of the TRR, (cold fuel, clad and coolant temperature of 20°C; and hot fuel, clad and coolant temperature of 65, 49 and 44°C, respectively) using the MTR-PC computer code. Comparative analysis shows that both βeff and Λ increase as fuel enrichment decreases. However, variation rate βeff is not the same in two conditions. βeff in the hot state is larger than those calculated in the cold state when fuel enrichment goes more than 83.91%, while the situation is reverse for... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

A computational code, based on the genetic algorithm and MCNPX version 2.6 code was developed and used to investigate the effects of some important parameters of HPGe detector (such as Al cap thickness, dead-layer thickness and Ge hole size) on optimum dimensions of marinelli beaker. In addition, the effects of detector material on optimal beaker dimensions were also investigated. Finally, the optimized beaker dimensions at various beaker volumes (300, 500, 700, 1000 and 1500 cm3) were determined for some conventional Ge detectors with different crystal sizes (16 sizes). These sets of data then were used to drive mathematical formulas (obtained by best fitting to data sets). The results... 

Various methods have been used for solving the neutron transport equation in the past, and a number of computer codes have been developed based on these solution methods. This paper describes a novel method for the solution of the steady-state and time-dependent neutron transport equation using the duality between neutronic parameters in the method of characteristic (MOC) and the electrical parameters in the cellular neural networks (CNN). The relevant electrical circuit can be simulated by professional electrical circuit simulator software, HSPICE. This software is used for numerical solution of the transport equation only by preparation of appropriate inputs. This method does not need... 

In the present study, the neutron noise, i.e. The stationary fluctuation of the neutron flux around its mean value, is calculated in 2-group forward and adjoint diffusion theory for both hexagonal and rectangular reactor cores. To this end, the static neutron calculation is performed at the first stage. The spatial discretization of equations is based on linear approximation of Galerkin Finite Element Method (GFEM) using unstructured triangle elements. Using power iteration method, forward and adjoint fluxes with the corresponding eigenvalues are obtained. The results are then benchmarked against the valid results for BIBLIS-2D and IAEA-2D benchmark problems and DONJON computer code. The... 

Noise analysis techniques including Feynman-α (variance-to-mean) and Rossi-α (correlation) have been simulated by MCNP computer code to calculate the prompt neutron decay constant (α0), effective delayed neutron fraction (βeff) and neutron generation time (Λ) in a subcritical condition for the first operating core configuration of Tehran Research Reactor (TRR). The reactor core is considered to be in zero power (reactor power is less than 1 W) in the entire simulation process. The effect of some key parameters such as detector efficiency, detector position and its dead time on the results of simulation has been discussed as well. The results of proposed method in the current study are... 

In this paper, by employing the energy finite element analysis, the high-frequency vibrations of a stiffened plate having a cutout, subjected to random vibrations, have been analyzed, and the obtained results have been validated by use of experimental methods. By using equations for joining of structures, energy finite element analysis computer codes were developed for the coupling of beam-plate elements. Finally, a plate containing a cutout and three stiffeners was fabricated and subjected to high-frequency random vibration tests. The results of the prepared codes were compared with the results of experiments. These comparisons indicated that at high frequencies, the energy finite element... 

This study concentrates on the improvement in the performance of PEM fuel cells through optimization of the channel dimensions and patterns in the velocity and pressure fields in bipolar plates. For design and optimization purposes, a 2D numerical simulation of the flow distribution based on the Nervier-Stokes equations using individual computer code has been done. The outcome of the numerical simulations showed excellent agreement with the experimental results in previous works. Finally numerical simulation has been conducted to investigate the advantages of conventional patterns with inspiration from leaf flow pattern. It was found that both velocity and pressure fields are very uniform in... 

In the previous researches, several theoretical equations were presented for calculation of buildup factor of the single layer shields. Also, the theoretical equations were offered for the two-layered shield that consist of the known materials. For other possible modes of the multi-layered shield, the buildup factor are usually calculated via experimental or simulated data. The purpose of present study is the extraction of the new theoretical equation for the gamma ray buildup factor of three-layered spherical shield made of water, concrete and iron based on the Monte Carlo calculation. To this end, the gamma ray buildup factor of the three-layered spherical shield is calculated via... 

Prediction of compressor performance is a basic step in design of this turbomachine, while designer can optimize plan by considering various conditions and calculating machine performance. Flow field in centrifugal compressor is threedimensional and intricate. Since 2-D and 3-D methods are very costly, consequently the mean line method usually is used for predicting compressor performance. The energy loss coefficients are used for this method. Because of the intricacy in flow and analysis of losses, most energy loss coefficients are attained by experimental procedures, however just some of them are determined according to theory and nature of the flow field. The purpose of this work is...