Sharif Digital Repository

Porous NiTi specimens were produced by elemental nickel and titanium powders and two different temporary space-holder consisting of NaCl and urea and conventional sintering method. Pore characteristic and morphology of porous NiTi specimens was investigated by optical and electron microscopy. Microstructure of specimens was probed using XRD and SEM. Suitable pore distribution and size for biomedical application was obtained using temporary space-holder method. Porosity content increases with increasing space holder powder. At 70 volume percent space-holder, best pore size and distribution with fully open pores, in size 200-500 µm, was obtained and pores are interconnected that suitable for... 

This project aimed to fabricate the bone scaffolds with applying thermoplastic starch-based nano-biocomposites. The starting materials for this scaffold are as follows: thermoplastic starch, ethylene vinyl alcohol as the polymer matrix and nanoforsterite as the ceramic reinforcing phase. Furthermore, vitamin E was used as antioxidant for preserving starch against thermo-mechanical degradations. Likewise, 3D pore structure was developed using azo-dicarbonamide and water in injection moulding process. With blending thermoplastic starch and ethylene vinyl alcohol, some thermoplastic starch’s properties including degradation rate and water absorption were modified. In addition, having... 

In this project ,it has been done different surface treatment on 6 samples of nitinol with 40 % prosity,three of them are anodized by H2SO4 ,Hf, Acetic acid, one of them is treated with plasma spray with TIO2 powder, one of them is putted in the furnace at 700 degrees for an hour, and the last one is bare ; Moreover, these treated samples are putted in Simulated body fluid for 16 days . After this period of time, we analyzed the results. Then the cell adhesion amount of osteo blast cells (MG 63) is measured to these samples by immersing them for 3 days in these cells.The results are investigated by SEM ,XRD(X pertpro produced by Panalitical), XRF(530-XRF-01), AAS( AA240), Roughness measuring... 

Considering the importance of biocompatibility of implantable prothesis’, metallic alloys have weaker corrosion resistance than ceramics. In order to extend usage of nanomaterials to improve the bio-properties of materials, Nano-structured ceramic coatings are being suggested to improve corrosion resistance and biocompatibility of prosthesis. Meanwhile, very good properties of TiN, such as corrosion resistance and mechanical properties as a thin film coating are undeniable. In this study, TiN and Ti2N thin film were deposited on Ti-based substrate, using PVD and Magnetron sputtering at different argon to nitrogen ratio. The crystal structure of the films was examined using Grazing XRD... 

Cardiovascular diseases are the leading cause of death all over the world, even more common than cancers. The first reason of mortality in Iran according to statistics is the occlusion of coronary arteries. Unfortunately almost one third of patients doesn’t have enough blood vessels to be used in the bypass surgery and need artificial vessels. These artificial blood vessels with small diameters (less than 6 mm) will fail quickly. As a result there is an increasing demand for tissue engineered blood vessels which are capable of enduring high blood pressures. An artificial blood vessel should mimic both structure and mechanical properties of the real one. Blood vessels have layered structures,... 

In recent years utilization of quantum dots for stem cells detection and clean energy production has received intensive attention. Graphene and its derivatives have been widely studied because of their effectiveness on electronical and optoelectronical devices, chemical sensors, nanocomposites, and energy storage. By use of metal nanoparticles, such as AuNPs, we can develop properties of graphene, and control them via shifting the absorption peak wavelength and increasing its biocompatibility. In this research, hybrid nanoparticles of gold-graphene as core-shell and conjugated by polymeric linkers containing amine or thiol functions are synthesized. Our purpose is stabilization the... 

Repairing and regeneration of neural tissues have attracted considerable attention due to its direct effect on the quality of patients’ lives. Recent developments in nanotechnology and tissue engineering have facilitated their comprehensive applications in the treatment of neurological diseases, and several effective ways have been proposed to repair defects in neural tissues. The main objective of the researches in this field is to regulate cellular behavior and tissue progression through the design and development of synthetic extracellular matrices, such as novel biomaterials, that enhance cell culture and tissue regeneration. Natural polymers, such as chitosan and gelatin, are suitable... 

In this project, the aim is finding the corrosion behavior and biocompatibility of metallic biomaterials in simulated body fluids.by this study we can have a wide knowledge about the behavior and use of metallic biomaterials.in this project we use three base metals. Ti (grade 5 and grade 2), stainless steel (316L and 316) and Mg alloy(AZ91 and AZ31). the media was six physiological environment( Cigada solution, Hank solution, SBF solution, Fusayama solution, Ringer solution and Tyrod’s solution). all of these environments are related to the body fluids except Fusayama solution that is an artificial saliva and is a mouth fluid. we used polarization tests to determine the corrosion behavior... 

In this research we aim to find enhance oil recovery mechanisms involved in nano-bio material injection by micro model apparatus which has not been studied before. Especially for injection in heavy oil and shaly porous media that forms most of heavy oil reservoirs. To this end, microscopic images from injection of nano-bio materials to shaly patterns have been taken and analyzed to find the process mechanism. Also amount of enhance oil recovery in different conditions like type of microbe forming bio material, nano-bio material concentration and type of flow pattern (shale characteristics including length, direction and distance from injection and production wells) will be studied.Three... 

3D bioprinting technology is a promising approach for corneal stromal tissue regeneration. At first, two different concentrations of GelMA macromer (7.5% and 12.5%) were tested for corneal stroma bioprinting. Due to high macromer concentrations, 12.5% GelMA was stiffer than 7.5% GelMA, which made it easier to handle. In terms of water content and optical transmittance of the bioprinted scaffolds, we observed that scaffold with 12.5% GelMA concentration was closer to the native corneal stroma tissue. Subsequently, cell proliferation, gene and protein expression of human corneal stromal cells encapsulated in the bioprinted scaffolds were investigated. Cytocompatibility in 12.5% GelMA scaffolds... 

Blood is one of the most important fluids in the human body, consisting of three parts: red blood cells, white blood cells and platelets. The mechanical properties of red blood cells are important in many diseases. The study of viscosity and other mechanical properties of red blood cells in recent years has attracted the attention of scientists in this field. The mechanical properties of red blood cells are related to the outer membrane and its cytoskeleton, and the study of these components can predict the behavior of red blood cells in diseases. The thyroid gland is located in front of the neck and secretes hormones that control many chemical processes in different parts of the body.... 

Despite the increase in the number of cardiovascular diseases worldwide, the number of new drugs to treat these diseases has been decreasing in the last decade. Current preclinical drug evaluation strategies, which use cell cultures and oversimplified animal models, cannot meet the growing demand for new and effective drugs. In the last decade, the development of microfluidic bioreactors and organ-on-chip systems to improve the drug screening process has been increasing significantly. These systems have shown many advantages over previous preclinical models. Despite all these advantages, keeping the oxygen concentration at the optimal physiological level in microfluidic systems has its own... 

Death can be the result of severe bleeding which is associated with the loss of a high amount of blood like what happens in accidents, wars, or operations. Classic methods to stop bleeding are mostly ineffective to decrease the hemostasis time and the volume of the lost blood. A wide variety of products like powders, foams, and hydrogels have been designed and synthesized either from natural or synthetic polymers. However, limitations like weak tissue adhesion, creating a moist environment in the wound site, infection, weak biodegradation, and hemolysis still have remained. Among the existing options to be used as hemostasis agents, polysaccharides can be appropriate considering their great...