Sharif Digital Repository

Excess fluoride is one of the water pollutants in the world, which is removed from water by chemical methods to produce sludge. On the other hand, techniques such as R.O. (Reverse Osmosis) also have problems with power consumption and wastewater disposal. Metal-organic frameworks are one of the newest adsorbents used to separate anions. In this study, MOF1 ({[Zn3L3(BPE)1.5]·4.5DMF}n) was used to remove fluoride from the aqueous solution. The influence of various factors such as pH, contact time, adsorbent amount, and temperature on fluoride uptake was investigated. Based on the results, the MOF synthesized in acidic media absorbs more fluoride ions. The reaction time in the first 20 min had... 

Aims: Synthesis of nanocarrier Fe3O4/silica-starch/PNVCL for drug delivery and Fe3O4/GO-starch for antibiotic removal applications Background: In the first part, the new magnetic nanocomposite including Fe3O4 nanoparticles coated with silica, anchored starch nanoparticles, and poly(N-vinylcaprolactam) and then, loaded by acetazolamide. In the second part, magnetic starch nanocomposites were synthesized and modified with graphene oxide. Methods: The drug loading, release and intrinsic cytotoxicity were measured. Also, the potential of Fe3O4/GO-starch as an adsorbent to remove cephalexin antibiotics from aqueous solutions was evaluated. Result: In the first part, the maximum drug adsorption... 

Two carbon composite materials were prepared by mixing avocado biochar and methyl polysiloxane (MK). Firstly, MK was dissolved in ethanol, and then the biochar was added at different times. In sample 1 (R1), the time of adding biochar was immediately after dissolving MK in ethanol, and in sample 2 (R2), after 48 h of MK dissolved in ethanol. The samples were characterized by nitrogen adsorption/desorption measurements obtaining specific surface areas (SBET) of 115 m2 g−1 (R1) and 580 m2 g−1 (R2). The adsorbents were further characterized using scanning electron microscopy, FTIR and Raman spectroscopy, adsorption of vapors of n-heptane and water, thermal analysis, Bohem titration, pHpzc, and... 

Nowadays, the world is facing a shortage of fresh water. Utilizing adsorbent materials to adsorb air moisture is a suitable method for producing freshwater, especially combining the adsorption desalination system with solar energy devices such as solar collectors. The low temperature of solar collectors has caused some water to remain in the adsorbents in the desorption process and has reduced the possibility of using these systems. In this research, for the first time, an evacuated tube collector (ETC) is used as an adsorbent bed so that the temperature of the desorption process reaches higher values and as a result, more fresh water is expected to produced. In this study, two adsorption... 

Understanding the adsorption dynamics of nanoparticles at solid-liquid interfaces is of paramount importance to engineer nanoparticles for a variety of applications. The nanoparticle surface chemistry is significant for controlling the adsorption dynamics. This study aimed to experimentally examine the adsorption of surface-modified round-shaped silica nanoparticles (with an average diameter of 12 nm), grafted with hydrophobic (propyl chains) and/or hydrophilic (polyethylene glycol chains) agents, at an aqueous solution-silica interface with spherical soda-lime glass beads (diameter of 3 mm) being used as adsorbents. While no measurable adsorption was observed for solely hydrophobic or... 

In this work Halloysite nanotubes were used to synthesis a series of modified acrylamide/Quince seeds-based hydrogels (Poly (AAm-co-QS)/Haln). The as-prepared Poly (AAm-co-QS)/Haln hydrogels displayed improved performance as adsorbent in elimination of methylene blue (MB) from aqueous solution. The structures of the prepared Poly (AAm-co-QS)/Haln hydrogels were identified by XRD, FT-IR, FE-SEM, BET, TGA and EDX. Effect of pH value on the swelling behavior and dye adsorption performance of as-prepared hydrogels was explored. The adsorption MB results suggested that the adsorption kinetics fitted the pseudo-second-order model. The adsorption experiments at various pH condition indicated that... 

With the advent of the Internet of Things (IoT), the development of self-powered sensors has received much attention. Introducing triboelectric nanogenerators (TENGs) as a power source that converts mechanical movement into electrical signals has been admired recently. Moreover, the monitoring of humidity has become enormously essential in several technological contexts from environment monitoring to biomedical applications, thus joining these two subjects provides a huge benefit in achieving self-powered humidity sensors. Here, in this research, facile, low-priced and self-powered humidity sensors are fabricated utilizing transition-metal dichalcogenides (TMD) nanosheets. Semi-vertical SnS2... 

Sulfur dioxide (SO2) is one of the acidic components found in the flue gas that can harm industrial facilities and the environment. SO2 adsorption by metal-organic frameworks (MOFs) is an emerging method to effectively remove SO2 in low concentrations from the gas mixtures. In this study, amino-functionalized MIL-53(Al), i.e., NH2-MIL-53(Al), was synthesized through the solvothermal method and examined for SO2 adsorption at relatively moderate pressure and temperature (up to 2 bar, 25-80 °). According to the results of XRD, FT-IR, TGA, and DSC analysis, NH2-MIL-53(Al) demonstrated appropriate water, acid, and thermal stability. The SO2 adsorption capacity of NH2-MIL-53(Al) was 5.21 mmol.g-1... 

A series of ZIF-8/OND hybrid nanostructures with different percentages of oxidized nanodiamond (OND) was prepared. Then, the adsorptive removal performance of pristine ZIF-8 and its nanohybrids with OND towards methylene blue (MB) was investigated. The fabricated adsorbents were characterized via thermogravimetric analysis, X-ray diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption, field emission scanning electron microscopy and zeta potential measurements. The maximal adsorption capacity of ZIF-8 (242 mg/g) was found to grow steadily with the increment in OND content and reached an approximate plateau at 343 mg/g for the nanohybrid containing 5 wt% OND, i.e.... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

In this study, a series of Zirconium-based MOF and chitosan composites (MOF-808/chitosan) were synthesized as efficient adsorbent for Cr(VI) ions elimination from aqueous solution. MOF-808/chitosan structure and morphology was characterized by FE-SEM, EDX, XRD, BET, zeta potential analysis, FT-IR, XPS techniques. The kinetic studies ascertained that Cr(VI) adsorption over MOF-808/chitosan followed pseudo-second-order kinetic model. The adsorption isotherms fitted the Langmuir isotherm model, implying on homogeneously adsorption of Cr(VI) on the surface of MOF-808/chitosan. According to the Langmuir model, the maximum capacity was obtained to be 320.0 mg/g at pH 5. Thermodynamic investigation... 

Tetracyclines (TCs) are a large family of broad-spectrum antibiotics with one of the highest aquatic persistence after release from humans and animals. Hence, TCs are known to generate antibiotic resistance along with estrogenic and other toxic effects in non-target organisms. Unfortunately, the detection and removal of TCs from aqueous matrices remain challenging. For this purpose, we review metal–organic frameworks (MOFs), which have emerged as effective alternatives, given their photocatalytic and adsorptive capabilities. MOFs exhibit large interactive surface area and tunable structure and pore size for fast mass transfer and strong host–guest interactions. Herein, these and other topics... 

This article deals with the adsorption performances of the unmodified nanodiamond (ND) and thermally oxidized nanodiamond (Ox-ND) for the removal of different heavy metal ions such as Fe (III), Cu (II), Cr (VI), and Cd (II) from wastewater. The adsorption capacities of the ions onto adsorbents are higher and follow the order: Ox-ND-3 > Ox-ND-1.5 > ND, which is consistent with their surface areas, zeta potentials, and the presence of carboxyl groups, suggesting that electrostatic attractions between the positive metal ions and the negatively charged adsorbents are the predominant adsorption mechanisms. Adsorption capacities of these adsorbents were found to be 26.8, 31.3, and 45.7 mg/g for Fe... 

A series of UiO-66/polyaniline (UiO-66/PANI) nanohybrids with various UiO-66 to aniline weight ratios ranging from 0.01 to 0.1 was synthesized using an in situ polymerization technique. The adsorption behavior of the neat PANI nanofiber network and the synthesized nanohybrids was examined toward anionic methyl orange (MO) dye from aqueous media. It was realized that the maximum adsorption capacity of PANI (229 mg/g) increases steadily by increasing the UiO-66 content in the nanohybrid up to 7 wt % at 426 mg/g, and then, it approximately levels off at 432 mg/g for the nanohybrid sample containing 10 wt % UiO-66, that is, UP10. Based on a thorough characterization, it was shown that UiO-66 is... 

In this project, the protective effect of Biebersteinia multifida root extract (BMRE) against corrosion of 1018 low carbon steel (1018LCS) in HCl solutions was appraised by assessing weight loss, electrochemical impedance spectroscopy (EIS), and polarization at 25 °C. The maximum inhibitory efficacy for the concentration of 1 g/l of the BMRE was 92.8% at 25 °C after 2 h and increased to 95.3% after 24 h of immersion. Polarization experiments have shown that the extract in acidic solutions can act as a mixed corrosion inhibitor. The corrosion inhibitory efficacy of BMRE decreased with increasing temperature, and at all temperature settings studied, the adsorption of BMRE molecules on 1018 LCS... 

A series of nanohybrids using ZIF-8 in the presence of chitosan (CS) at various compositions (0.5–15 wt%) were synthesized. Thorough characterization exhibited that the morphology of the nanoparticles in terms of surface charge, particle size, specific surface area, and pore volume is significantly dominated by the CS content in the hybrid nanoparticles. Amongst the nanoparticles synthesized, a hybrid nanoparticle containing 2 wt% CS, named CS-ZIF-2, represented the largest positive zeta potential and smallest particle size. Moreover, adsorption experiments indicated that CS-ZIF-2 had considerable adsorption capacity against anionic dye (Congo Red, CR) compared with the individual ZIF-8 and... 

In this study magnetite nanoparticles (Fe3 O4) were synthesized and embedded in activated carbon (AC) derived from waste tire rubber to produce magnetic activated carbon. The atrazine (C8 H14 ClN5) adsorption was performed over (AC/Fe3 O4) nanocomposite in an aqueous solution and adsorp-tion isotherms and kinetics were determined. The effects of some parameters such as (pH, contact time, adsorbent dosage and initial pesticide concentration) were investigated. Characterization of nanocomposite was carried out by high-resolution scanning electron microscopy and transmission electron microscopy, X-ray powder diffraction, vibrating sample magnetometer, Brunauer–Emmett– Teller, Fourier-transform... 

An economical epichlorohydrin cross-linked chitosan @ magnetic Fe3O4/activated carbon nanocomposite, CH-EP@Fe3O4/AC, was successfully synthesized and used as a suitable adsorbent material for removal of a triphenylmethane cationic dye, Malachite green (MG), an anionic dye, Reactive red 120 (RR120), and Mercury ions (Hg2+) from aqueous solution. The prepared adsorbent has been characterized with Fourier transform infrared spectroscopy, X-ray diffraction, Scanning electron microscopy, Thermogravimetric analysis, Brunauer–Emmett–Teller analysis as well as Vibrating sample magnetometer. According to the result of Brunauer–Emmett–Teller isotherm, the prepared adsorbent has a specific surface area... 

Background: Integrated sewage sludge handling and heavy metal management are important issues that scientists are working to solve today. Methods: Hydrothermal carbonization of dewatered digested sewage sludge (DDSS) under various conditions is carried out in this work, followed by alkali activation. The response surface methodology is used to investigate the operating process conditions and optimize them in order to produce hydrochar with the highest modified adsorption capacity (yield and Pb2+ adsorption). Significant Findings: The ideal conditions are 182.4°C, 4.9 hours, 5.025 (w/w) water/DDSS ratio, and 3.5 (w/w) ZnCl2/DDSS ratio. In addition, the Langmuir isotherm (qmax =109.3 mg/g) and... 

In the last decade, there has been a swift development in several scientific research works in which the quartz crystal microbalance (QCM) technique has played a critical role in unravelling different aspects of energy and environmental materials and biological substances as well as all corresponding molecular interactions within those media. We comprehensively review the numerous types of surface chemistries, including but not limited to hydrogen bonding, hydrophobic and electrostatic interactions, self-assembled monolayers and ionic bonding, that are monitored using QCMs in a variety of fields such as energy and chemical industries in addition to the biology, medicine and nanotechnology...