Sharif Digital Repository

Relationship between microstructure and mechanical properties of transient liquid phase-bonded joints of GTD-111 nickel-base superalloy using a Ni-Si-B interlayer was investigated. Shear strength and hardness profile of the joints were discussed with respect to the bond microstructure. In the bonding condition, in which isothermal solidification has not been accomplished completely, eutectic constituent which has the highest hardness in the bond region is the preferential failure source. Additionally, it was found that when isothermal solidification is completed, the extent of γ′ formation in the bond region is the controlling factor for joint strength. Shear strength of bonds after... 

Heat generation from very large-scale integrated (VLSI) circuits increases with the advent of high-density integrated circuit technology. One of the promising techniques is liquid cooling by using microchannel heat sink. Numerical works on the microchannel heat sink in the literature are mostly two dimensional. The purpose of the present study is to develop a three-dimensional analysis procedure to investigate flow and conjugate heat transfer in the microchannel-based heat sink for electronic packaging applications. The micro-heat sink model consists of a 10 mm long silicon substrate, with rectangular microchannels, 57 μm wide and 180 μm deep, fabricated along the entire length. A finite... 

The consolidation behaviour of particulate reinforced metal matrix composite powders during cold uniaxial compaction in a rigid die was studied. Al-SiC powder mixtures with varying SiC particle size, ranging from nanoscale (50 nm) to microscale (40 μm), at different volume fractions up to 30% were used. Based on the experimental results, the effect of the reinforcement particles on the densification mechanisms, i.e. particle rearrangement and plastic deformation, was studied using modified Cooper-Eaton equation. It was found that by increasing the reinforcement volume fraction or decreasing its size, the contribution of particle rearrangement on the densification increases while the plastic... 

A new Quantitative Structure-Retention Relationship (QSRR) approach was carried out for prediction of gas-liquid retention times of 124 psychiatric drugs in whole blood on fused-silica capillary column coated with crosslinked methylsilicone with nitrogen-phosphorus detection. After screening the descriptors, a total of 699 topological, geometric, and electronic descriptors (zero-to three-dimensional) representing various structural characteristics were calculated for each molecule in the dataset. Combined method of Classification and Regression Tree (CART) as a feature selection method for the extraction of four relevant descriptors and Adaptive Neuro-Fuzzy Inference System (ANFIS) as a... 

In order to optimize the aging treatment of Mg-1.8Zn-0.7Si-0.4Ca alloy, different times and temperatures of solid solution and age hardening were applied to the alloy specimens. Microstructures and mechanical properties of the specimens were investigated using the optical microscopy, field emission scanning electron microscopy equipped with an energy dispersive x-ray spectrometer, x-ray diffraction, hardness, and shear punch tests. The lowest hardness and strength were achieved by solution treating of the alloy at 500 °C for 8 h, presenting the optimal condition for solution treatment of the alloy. The microstructural examinations revealed three different precipitates consisting of CaMgSi,... 

Unmanned Aerial Vehicles (UAVs) have found compelling applications in intelligent logistics, search and rescue as well as in air-borne Base Station (BS). However, their communications are prone to both channel errors and eavesdropping. Hence, we investigate the max-min secrecy fairness of UAV-aided cellular networks, in which Cooperative Rate-Splitting (CRS) aided downlink transmissions are employed by each multi-antenna UAV Base Station (UAV-BS) to safeguard the downlink of a two-user Multi-Input Single-Output (MISO) system against an external multi-antenna Eavesdropper ( Eve ). Realistically, only Imperfect Channel State Information (ICSI) is assumed to be available at the transmitter.... 

In this work, the addition of a novel polyaniline (PANI)/silica (SiO2) nanostructure (PSn) in chitosan/polyvinyl alcohol nanofibers (CP) was evaluated to enhance the dye removal capacity of CP. Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDS) results confirmed the chemical grafting of SiO2 on PANI nanoparticles. Brunauer-Emmett-Teller (BET) results showed a specific surface area of 61 m2 g−1 for the PSn filled CP nanofiber (CP-PSn). FE-SEM and EDS-elemental mapping results showed the uniform dispersibility of PSn in CP nanofibers. After the addition of PSn into CP, the adsorption capacity of... 

We theoretically investigate the magnetoelastic coupling (MEC) and its effect on magnon transport in two-dimensional antiferromagnets with a honeycomb lattice. MEC coefficients along with magnetic exchange parameters and spring constants are computed for monolayers of transition-metal trichalcogenides with Néel magnetic order (MnPS3 and VPS3) and zigzag order (CrSiTe3, NiPS3, and NiPSe3) by ab initio calculations. Using these parameters, we predict that the spin-Nernst coefficient is significantly enhanced due to magnetoelastic coupling. Our study shows that although Dzyaloshinskii-Moriya interaction can produce spin-Nernst effect in these materials, other mechanisms such as magnon-phonon... 

We investigate systematically the spin-Nernst effect in Néel and zigzag ordered honeycomb antiferromagnets. Monolayers of transition-metal trichalcogenides, MnPSe3, MnPS3, and VPS3 show an antiferromagnetic Néel order while CrSiTe3, NiPS3, and NiPSe3 show an antiferromagnetic zigzag order. We extract the exchange and Dzyaloshinskii-Moriya interaction parameters from ab initio calculations. Using these parameters, we predict that the spin-Nernst coefficient is at least two orders of magnitude larger in zigzag compared to the Néel ordered antiferromagnets. We find that this enhancement relies on the large band splitting due to the symmetry of magnetic configuration in the zigzag order. Our... 

The design and development of efficient approaches for water–oil separation have had widespread interest. Most previously introduced techniques and materials used for development of the successful separation of oily wastewater could not answer all the desired demands, such as being efficient and environmentally and economically friendly. Therefore, in seeking a novel method capable of answering these expectations, surfaces with special wettability were introduced. A novel, reusable, and recyclable superhydrophilic and superoleophobic poly(Vsim-Vim)@PFOA@SiO2 nanocomposite-coated stainless steel mesh was synthesized through a facile preparation process. Since the most important factors of... 

Up to now, different methods have been developed for estimation of buildup factor (BF). However, either expensive estimation or time-consuming estimation are major restrictions/challenges of these methods. In this study a new technique utilizing combination of Monte Carlo method and the Bayesian regularization (BR) learning algorithm of multilayer feed-forward neural network (FFNN) is employed for estimation of BFs. First, the BFs of the different elements (i.e. Al, Cu, and Fe) at different energies and different mean free paths (MFPs) are modeled by the MCNP code. The results show that the calculated BFs by MCNP code are in good agreement with the reported values of American nuclear society... 

Diatoms are unicellular microalga found in soil and almost every aquatic environment (marine and fresh water). Biogenic silica and diatoms are attractive for biotechnological and industrial applications, especially in the field of biomedicine, industrial/synthetic manufacturing processes, and biomedical/pharmaceutical sciences. Deposition of silica by diatoms allows them to create micro- or nanoscale structures which may be utilized in nanomedicine and especially in drug/gene delivery. Diatoms with their unique architectures, good thermal stability, suitable surface area, simple chemical functionalization/modification procedures, ease of genetic manipulations, optical/photonic... 

Power consumption of wellbore drilling in oil and gas exploitations count for 40% of total costs, hence power saving of WBM (water-based mud) by adding different concentrations of Al2O3, TiO2 and SiO2 nanoparticles is investigated here. A high-speed Taylor–Couette system (TCS) was devised to operate at speeds 0–1600 RPM to simulate power consumption of wellbore drilling using nanofluids in laminar to turbulent flow conditions. The TCS control unit uses several sensors to record current, voltage and rotational speed and Arduino microprocessors to process outputs including rheological properties and power consumption. Total power consumption of the TCS was correlated with a second-order... 

The high computational costs of atomistic simulations for the investigation of nanostructures, despite their accuracy, necessitate efforts to develop efficient continuum models. Since the classical continuum mechanics assume the matter as continuous and ignore the size dependency of material properties, these theories fail to capture the behavior of materials at the nanoscale. Size-dependencies of nanostructures could result in the emergence of surface effects. This paper, for the first time, aims to develop and tune surface-enhanced continuum models to predict the vibrational properties of nanoplates which are inherently discrete at the nanoscale. Regarding this aim, we use a composite... 

With the advent of the Internet of Things (IoT), the development of self-powered sensors has received much attention. Introducing triboelectric nanogenerators (TENGs) as a power source that converts mechanical movement into electrical signals has been admired recently. Moreover, the monitoring of humidity has become enormously essential in several technological contexts from environment monitoring to biomedical applications, thus joining these two subjects provides a huge benefit in achieving self-powered humidity sensors. Here, in this research, facile, low-priced and self-powered humidity sensors are fabricated utilizing transition-metal dichalcogenides (TMD) nanosheets. Semi-vertical SnS2... 

The creation of surfaces with various super nonwetting properties is an ongoing challenge. We report diverse modifications of novel synthesized zirconia-ceria nanocomposites by different low surface energy agents to fabricate nanofluids capable of regulating surface wettability of mineral substrates to achieve selective superhydrophobic, superoleophobic-superhydrophilic, and superamphiphobic conditions. Surfaces treated with these nanofluids offer self-cleaning properties and effortless rolling-off behavior with sliding angles ≤7° for several liquids with surface tensions between 26 and 72.1 mN/m. The superamphiphobic nanofluid coating imparts nonstick properties to a solid surface whereby... 

Alterations in the structure of a magnetron, e.g., the A6 relativistic magnetron, are proposed, which considerably increase the device's build-up speed. We cover the magnetron vane surfaces with semiconductor layers of nonzero electric conductivity, with an exact geometrical design. Semiconductor layers with considerable mechanical strength also provide excellent shielding for the vanes against the high-energy relativistic electrons' bombardment. The novel structure introduces several new free parameters to the magnetron design procedure and considerably increases the design flexibility. A multistage exact optimization procedure, performed by extensive computer simulations, shows that... 

In the present research, the influence of nanodiamond (ND) and a physical hybrid of ND and fumed nano-SiO2 were investigated on the performance of a typical tire tread compound. The styrene-butadiene rubber (SBR) and cis-butadiene rubber (BR) blend filled with a commercial grade highly dispersive silica at 70 phr loading were used as typical tire tread compound. ND was substituted partially with silica at two different concentrations of 5 and 10phr. Meanwhile, 5 phr of ND/nano-SiO2 hybrids with the weight ratio of 2.5/2.5 and 1/4 were substituted with silica. ND-Filled compounds exhibit increased scorch and cure time compared to controls. Improvement in different characteristics of the... 

Because of the low outflow temperature of the conventional photovoltaic thermal systems and lack of electrical production of the solar thermal collectors, a novel combined system is proposed to solve the two mentioned drawbacks. This novel system is achieved by connecting a photovoltaic thermal unit to a solar thermal collector in series. To increase the overall performance of this novel combined system, different hybrid nanofluids include (1) multiwall carbon nanotube-aluminum oxide (2) multiwall carbon nanotube-silicon carbide (3) graphene-aluminum oxide, and (4) graphene-silicon carbide are compared. The investigation is performed based on the three-dimensional simulation, and the... 

Surfaces with special wettability have aroused lots of attention due to their broad applications in many fields. In this work, we systematically report selective and various fabrications of nanofluids based on readily available materials such as SiO2 nanoparticles and polydimethylsiloxane to create superhydrophobic, superoleophobic, superhydrophilic/superoleophobic, and underwater superoleophobic coatings. The efficiency of prepared coatings is investigated on mineral rock plates as porous substrates via the straightforward and cost-effective solution-immersion technique. The static water contact angle of 170°, effortless bouncing of water droplets, and self-cleaning property with a near...