Sharif Digital Repository

To improve the thermal stability of starch in water-based drilling fluid, monoethanolamine (MEA) was added, and the effect was investigated by laboratory experiment. The experimental results show that the addition of monoethanolamine (MEA) increases the apparent viscosity, plastic viscosity, dynamic shear force, and static shear force of the drilling fluid, and reduces the filtration rate of drilling fluid and thickness of mud cake apparently. By creating hydrogen bonds with starch polymer, the monoethanolamine can prevent hydrolysis of starch at high temperature. Starch, as a natural polymer, is able to improve the rheological properties and reduce filtration of drilling fluid, but it works... 

To improve the thermal stability of starch in water-based drilling fluid, monoethanolamine (MEA) was added, and the effect was investigated by laboratory experiment. The experimental results show that the addition of monoethanolamine (MEA) increases the apparent viscosity, plastic viscosity, dynamic shear force, and static shear force of the drilling fluid, and reduces the filtration rate of drilling fluid and thickness of mud cake apparently. By creating hydrogen bonds with starch polymer, the monoethanolamine can prevent hydrolysis of starch at high temperature. Starch, as a natural polymer, is able to improve the rheological properties and reduce filtration of drilling fluid, but it works... 

Supercritical fluid extraction is a new technology that could be effectively used to treat oil-contaminated drill cuttings generated during drilling for oil and gas. In this work, the solubility of oil-contaminated drill cuttings in supercritical carbon dioxide is obtained by an experimental flow type apparatus. The solubility was measured at 200 bar pressure, over a temperature range of 55-79.5°C. The measured solubility and experimental data for oil in drill cuttings were correlated using the PC-SAFT, PR and SRK EOS models, without any adjustable parameters. Average absolute derivations of less than 15.1 %, 98.7 %, and 99.3 % are achieved between predicted and experimental values for the... 

Cutting transport is an important goal in drilling operation especially in horizontal and deviated wells since it can cause problems such as stuck pipe, circulation loss and high torque and drag. To this end, this article focused on the affecting parameters on the cutting transport by computational fluid dynamic (CFD) modeling and real operational data. The effect of drilling fluid and cutting density on the pressure drop, deposit ratio and string stress on the cutting transport has been investigated. A systematic validation study is presented by comparing the simulation results against published experimental database. The results showed that by increasing two times of drilling fluid... 

An API standard drilling fluid was investigated from laminar to turbulent flow conditions using an in-house-built viscometer at speeds from 200 to 1600 RPM. A power-based method was applied to obtain the apparent viscosity and the shear stress of the water-based drilling mud (WBM) in the annulus of the viscometer. Then, a MATLAB optimization program was developed to obtain model parameters for five rheology models integrated in a generalized Herschel-Bulkley-Extended (HBE) model and two widely used 4-parameter models in drilling industry. It is found that the Bingham, Cross, and HBE rheology models have precisely matched the WBM measurements in the viscometer. A generalized Reynolds number... 

In this paper, the impact of three parameters including nanoparticles geometry, particles aggregation and borehole inclination on induced formation damage from water based drilling fluids were investigated by means of experimental studies. Accordingly, we designed a dynamic filtration setup capable to rotate and change well inclination. Nano-based drilling fluids consisting of spherical, cubical and tubular shapes nanoparticles as fluid loss additives were used. Mud cake quality, core permeability impairment and degree of formation damage at various well inclinations were examined. The cluster structure of aggregated particles were determined using fractal theory and applying dynamic light... 

Appropriate execution of drilling operation, in particular for high pressure and high temperature wells, requires accurate knowledge of behavior of the drilling fluid density as a function of pressure and temperature. In this communication, a novel mathematicalbased approach is presented to develop a reliable model for predict the density of four drilling fluid including water-based, oil-based, Colloidal Gas Aphron (CGA) and synthetic. To pursue our objective, a predictive model is proposed using a robust soft computing approach namely least square support vector machine (LSSVM) modeling optimized with coupled simulated annealing (CSA) optimization tool. Moreover, leverage approach, in which... 

Despite the fact that hydrophobic nanosilica can improve the stability of water/oil emulsion, there exist controversies pertaining to its influence on oil-based drilling fluid rheological behavior and the subsequent formation damage. The present study addresses the above using a surface modified nanosilica, where the particles were functionalized with different silane-based groups to alter their hydrophilicity: 3-glycidoxypropyl-triethoxy silane (GPTS) and combined GPTS and propyl silane (PGPTS). The NPs were characterized through FTIR analysis, particle size, and zeta-potential measurements followed by flow behavior experiments, core-scale mud flow tests, Computed Tomography (CT) scanning... 

Drilling fluids consist of several components with different physical and structural form which can be assumed as complex fluids. Optimum performance of drilling process could be obtained through the dynamic fluid computation which requires a reliable mathematical model capable to predict transient and steady state rheological behavior of drilling fluid. Generalized Newtonian formulations are the most popular models for drilling fluids due to their simplicity in spite of their inabilities to predict transient and elastic behavior of such fluids. In this paper, we have developed a mathematical model to predict transient and steady state rheological behavior of the complex fluids on the scale... 

The hybrid-polymer nanocomposite poly(styrene-methyl methacrylate- acrylic acid) /nanoclay was synthesized by miniemulsion polymerization for novel use as a drilling fluid additive. Three low-solid-drilling fluids (bentonite-based; natural polymer-based; nanoclay-based) were formulated using the hybrid nanocomposite as an additive and their rheological performance compared. The polymer/clay hybrid nanoparticles significantly improve rheological and filtration properties of the drilling fluids and they remain stable at high pressure, high temperature and harsh salinity conditions. The fluids’ filtration properties improve as the concentration of the polymer/nanoclay-hybrid-nanoparticles... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Deep wells suffer from the instability and disintegration of natural polymers and other commonly used additives under high pressure and high temperature condition. As a result, serious problems such as hydraulic loss, stuck pipe, and high torque and drag are expected to take place which leads to a dramatic increase in cost and time. This study presents the functionality of a novel synthetic based acrylamide-styrene copolymer (SBASC) as a supersede additive for water-based drilling mud. First, the SBASC was synthesized using an emulsion polymerization process and its particle morphological and polymer chain structural properties were determined by Field Emission Scanning Electron Microscopy... 

In drilling industry, energy consumption counts from 20 to 40 percent of total costs. Enhanced water-based mud (WBM) drilling fluids with nanoparticles can save energy in drilling processes. An in-house Taylor-Couette flow system (TCS) was developed at Australian University (AU) to study WBM enhanced by Al2O3, SiO2, and TiO2 nanoparticles. The TCS is really a practical tool to help well drillers with a rough idea of viscosity when nanoparticles are added. The TCS for sure cannot substitute advanced rheometry. The goal of the present experiment is to produce a rough estimate in field operation. Experimental results were examined with several rheology models in our previous publications. In...