Sharif Digital Repository

Growing nanocrystals in a matrix is a way to have separate, non-agglomerated nanoparticles, which are surface passivated and stabilized against environmental attacks. To create nanocrystals of the desired size and properties in a matrix, it is required that the growth parameters are properly tuned. In this work, we study the growth parameters for ZnS nanocrystals in an SiO2 matrix. Samples were prepared by cosputtering of SiO 2 and ZnS on a silica substrate, followed by annealing at different temperatures. Two categories of samples with low-content ZnS (4 mol%) and high-content ZnS (15 mol%) were examined. In the low-content samples, ZnS nanocrystals are not formed below 900°C annealing... 

Incorporation of calcium(ii), zinc(ii) and aluminium(iii) to manganese oxides greatly improved the activity of manganese oxide towards the epoxidation of olefins in the presence of anhydrous tert-butyl hydroperoxide as an oxidant  

The effect of one of the surfactants such as Tiron, a compound based on the benzene molecule, on the morphology and chemical composition of zinc oxide deposits, produced from a zinc complex solution using two-stage chemical deposition (TSCD) technique, has been investigated. TSCD technique is a novel and simple chemical route for the deposition of ZnO film from aqueous solution. Zinc oxide films deposited on high purity alumina (HPA) as a substrate. The results show that the addition of Tiron changes the surface morphology and causes to form the fine-grained structure. With a dense and nodular-shape appearance, the film produced from the precursor of zinc complex-containing Tiron, is... 

In this study the thermal calcination of two materials, high purity zinc carbonate hydroxide and the Calsimin zinc carbonate concentrate have been investigated. Isothermal studies have been performed on samples at different temperatures and times. Non-isothermal analysis has been carried out by TGA and DSC. It has been found that the calcination behaviour of both materials corresponds to the shrinking core model. The activation energy for the calcination of zinc carbonate hydroxide is found to be 88.7 kJ/mol, and that for the Calsimin sample is 97.3 kJ/mol. © 2006 Elsevier B.V. All rights reserved  

Efficient synthesis of protected and unprotected chlorohydrins has been achieved by ring opening of epoxides with acetyl/benzoyl chloride and TMSCl using a catalytic amount of ZnO as a reusable catalyst. The applicability of ZnO is further extended by performing the cleavage of the natural product 5,6-epoxysitosterol with acetyl chloride. © 2009 Wiley Periodicals, Inc  

A series of bifunctional Cu-ZnO-ZrO2/H-Y catalysts of different compositions were prepared by coprecipitating sedimentation method and were characterized by surface area and XRD analyses. The catalytic performance in synthesis of tetrahydrofuran was evaluated and optimized in a three-phase slurry batch reactor. The experimental results showed that the appropriate ratio of Cu/ZnO in the hydrogenation catalyst was 50/45, for which the conversion of maleic anhydride (MA) and selectivity of tetrahydrofuran (THF) reached 100% and 46%, respectively, at 50 bar and 493 K after 6 h of operation. Also, according to these results, it was demonstrated that the incorporation of zirconium oxide in the... 

In this paper, the effects of flame retardant fillers mixture, zinc borate and aluminum hydroxide, on polypropylene including various ratios of their accumulated concentrations, have been studied. Maleic anhydrate grafted polypropylene and calcium stearate have been used to increase filler-matrix interactions and filler dispersion in matrix. Effects of filler types and their concentrations on fire resistibility of different composite samples have been determined via limiting oxygen index test method. Effects of foregoing parameters on the mechanical properties of prepared samples were also investigated. Recorded data shows that adding polypropylene, containing aluminum anhydrate lump,... 

A magneto-photothermal therapy for cancer (in vitro photothermal therapy of prostate cancer cells and in vivo photothermal therapy of human glioblastoma tumors in the presence of an external magnetic field) was developed using superparamagnetic zinc ferrite spinel (ZnFe2O4)-reduced graphene oxide (rGO) nanostructures (with various graphene contents). In vitro application of a low concentration (10 μg mL-1) of the ZnFe 2O4-rGO (20 wt%) nanostructures under a short time period (∼1 min) of near-infrared (NIR) irradiation (with a laser power of 7.5 W cm-2) resulted in an excellent destruction of the prostate cancer cells, in the presence of a magnetic field (∼1 Tesla) used for localizing the... 

Superparamagnetic ZnFe2O4/reduced graphene oxide (rGO) composites containing ZnFe2O4 nanoparticles (with ∼5-20 nm sizes) attached onto rGO sheets (with ∼1 μm lateral dimensions) were synthesized by hydrothermal reaction method. By increasing the graphene content of the composite from 0 to 40 wt%, the size as well as the number of the ZnFe2O4 nanoparticles decreased and the saturated magnetization of the composites reduced from 10.2 to 1.8 emu/g, resulting in lower responses to external magnetic fields. Concerning this, the time needed for 90% separation of ZnFe2O4/rGO (40 wt%) composite from its solution (2 mg/mL in ethanol) was found 60 min in the presence of an external magnetic field (∼1... 

A novel nanocomposite of ZnO-PbO with flower-like nanostructure was fabricated from zinc acetate and lead nitrate as principle raw materials via an in situ process. The novelty of this study consists in the use of a common approach for fabricating of ZnO and PbO nanoparticles simultaneously. From these experiments the conclusion might be drawn that Zn(NH4) 2 4+ ions and Pb(OH)2 act as precursors for the nucleation and growth of ZnO and PbO respectively under microwave irradiation. The precursors formation were carried at two stages: reaction between zinc ions and lead nitrate with ammonium ion and hydroxide sodium respectively. The average crystalline size of Zno and PbO has been analysed by... 

Superparamagnetic zinc ferrite spinel-graphene nanostructures were synthesized as potential therapeutic agents in the magnetic targeted photothermal therapy of cancer and/or drug delivery. The global temperature of the solution and the local temperature at the nanoparticle (NP) surface determine the protein corona composition/content, which in turn affects the biological effects of NPs and the corresponding physiological responses. Therefore, it is rational to hypothesize that spinel-graphene nanostructures may have distinct protein corona compositions and contents, and therapeutic and toxic effects under laser irradiation. To assess this hypothesis, the effects of laser irradiation on the... 

ZnO nanoparticles (NPs) and submicron aggregates (SMAs) were synthesized via a simple precipitation method by changing the amount of zinc acetate di-hydrate in absolute ethanol and synthesis time. Synthesized NPs and SMAs were characterized by FE-SEM, EDS, XRD, PL, and DRS and were used to fabricate dye-sensitized solar cells (DSSCs). The SMAs synthesized at moderate concentration (0.022 M) and with poly-dispersed distribution of the aggregates showed lower density of deep localized trap states as well as enhanced scattering features in comparison to NP-based electrode. As a result, power conversion efficiency (η) of about 2.56% with improved current density (Jsc) of 8.51 mA/cm2 were... 

Branched hierarchical zinc oxide nanowires (BH-ZnO NWs) were fabricated successfully by a facile and rapid synthesis using two-step growth process. Initially, ZnO NWs have been prepared by anodizing zinc foil at room temperature and followed by annealing treatment. Then, the BH- ZnO NWs were grown on the ZnO NWs by a solution based method at very low temperature (31 oC). The BH- ZnO NWs with different aspect ratio were obtained by varying reaction time (0.5, 2, 5, 10 h). Photocatalytic activity of the samples was studied under both UV and visible light. The results indicated that the optimized BH-ZnO NWs (5 h) as a photocatalyst exhibited the highest photoactivity with about 3 times higher... 

Zinc-rich ethyl silicate coatings are quite successful in protecting steel against corrosion under severe exposing conditions. In spite of providing excellent cathodic protection to steel structure after film curing, two-component zinc-rich ethyl silicate coatings have some limitations, one of which is inadequate shelf life as a result of in-can binder gelation. In this work, the preparation steps of ethyl silicate such as pre-hydrolysis, dehydration and organometallic reactions were surveyed and herein an approach towards understanding the cause and effect relationship of the use of ingredients is presented. The effects of water and catalytic acid dosages on gel time under accelerated... 

Demand increasing for next generation portable and miniaturized electronics has aroused much interest to explore microscale and lightweight energy storage devices. Herein, we demonstrate successful development of flexible wire-shaped micro-supercapacitors (micro-SCs) based on novel CoNi2S4/E-NZP film@Cu wire electrode. The etched Ni-Zn-P (E-NZP) film was synthesized by directly deposition of NZP film on Cu wire, followed by a chemical etching process. Alkaline etching treatment provides a micro- and mesoporous structure with high surface area and facilitates the penetration of electrolyte ions into the electrode matrix. Then, CoNi2S4 nanosheets as electroactive material are electrochemically... 

Ag2O particles were loaded on the surface of ZnCr-LDH via an anion-exchange precipitation approach by using privilege of the memory trace feature of the LDH-type materials. The structural properties of the resulted photocatalyst were explored by different spectroscopic and microscopic methods. The photocatalytic studies on acid black degradation ascertained that the prepared Ag2O/ZnCr-LDH nanocomposite represented an observably increased degradation performance of organic pollutants compared with pure Ag2O and ZnCr-LDH. This improved photocatalytic performance can be ascribed to the enhanced surface area, good order distributing of particles and effective charge carrier transfer and... 

In this study, a novel idea was utilized for designing high performance bilayer absorber for X-band frequency. The microwave dissipation features of the bilayer structure absorbers with one-layer bare resin epoxy and the other epoxy resin filled with [CaTiO3/ZnFe2O4]@C nanocomposite as lossy filler were simulated with CST studio suite within 2–18 GHz. The lossy filler was successfully developed via chemical method. In the first step two distinct single layer absorbers of bare resin epoxy and resin epoxy filled with [CaTiO3/ZnFe2O4]@C nanocomposite ([CT/ZF]@C) were prepared and in the second step the measured electromagnetic parameters were considered as input data of CST studio suite for... 

The influence of indium on the properties of Cu0.5Zn0.5Fe2O4 nano ferrites synthesized by sol–gel auto-combustion technique was studied. X-ray diffraction (XRD) analysis demonstrated that pure and substituted ferrites possessed cubic spinel structure. The lattice parameter increases with the inclusion of In3+ for x ≤ 0.16 and decreases subsequently. A linear decrease in crystallite size was found as concentration of indium increased. X-ray density, strain, and dislocation density were increased as indium content increases. Hopping lengths as well as radii of A and B sites revealed increasing behavior up to x = 0.16 and decreased thereafter. The spectral bands indicated the formation of... 

Hydrothermal and in-situ polymerization methods were used to successfully fabricate a pompon flower-like CoGd0.5Fe1.5O4 (CG) as a magnetic component and a cauliflower-like poly(indole-co-Py) (PP) co-polymer as a dielectric component for microwave absorption. The physico-chemical properties of CG/PP samples were determined via XPS, XRD, FTIR, BET, UV–vis, EDS, and FESEM analysis. VNA and VSM were used to evaluate the dielectric and electromagnetic properties of the CG and PP samples. The results of the absorption capability tests revealed that bi-layer samples outperformed single layer samples in terms of microwave dissipation capability. The thickness and arrangement of each layer in bilayer... 

The influence of indium on the properties of Cu0.5Zn0.5Fe2O4 nano ferrites synthesized by sol–gel auto-combustion technique was studied. X-ray diffraction (XRD) analysis demonstrated that pure and substituted ferrites possessed cubic spinel structure. The lattice parameter increases with the inclusion of In3+ for x ≤ 0.16 and decreases subsequently. A linear decrease in crystallite size was found as concentration of indium increased. X-ray density, strain, and dislocation density were increased as indium content increases. Hopping lengths as well as radii of A and B sites revealed increasing behavior up to x = 0.16 and decreased thereafter. The spectral bands indicated the formation of...