Sharif Digital Repository

Ostracism has been recognized as conceptually and empirically distinct from harassment. Drawing from theory and research that suggests that employees have a strong need to belong in their organizations, we examine the comparative frequency and impact of ostracism and harassment in organizations across three field studies. Study 1 finds that a wide range of employees perceive ostracism, compared with harassment, to be more socially acceptable, less psychologically harmful, and less likely to be prohibited in their organization. Study 2 surveyed employees from a variety of organizations to test our theory that ostracism is actually a more harmful workplace experience than harassment.... 

In the optimization of naturally fractured reservoirs, it is required to take into account their complex flow behavior due to high conductivity fractures. In this regard, the possible effects of fractures must be included in the optimization procedure. In a water-flooding project, fast water breakthrough from injection to production wells may be occurred because of high permeability fractures. To consider the effect of the fracture system, a multi-criterion optimization procedure is proposed in this work. For this contribution, Non-dominated Sorting Genetic Algorithm version II (NSGA-II) is implemented for the optimization purposes. Considering the effect of the fracture system on the flow... 

There are several types of drilling methods to increase the productivity of a well, such as horizontal drilling, extended reach horizontal drilling and Multilateral (ML) drilling. It is thought that ML wells could be more economic with higher productivities than horizontal or extended reach horizontal wells. Advances in ML drilling promise reduced costs, greater flexibility and increased profit potential. In the last 20 years, thousands of ML wells have been drilled worldwide, but only a small percentage of the total number of wells is multilateral. The probable reason may be lack of concise information and misconceptions surrounding the costs and perceived risks. However, recent advances in... 

Steam-assisted gravity drainage is one of the most promising strategies to develop huge heavy oil and bitumen accumulations. Like the other thermal processes, this method aims at reducing oil viscosity by increasing the temperature. But in an economical point of view, it requires a great volume of steam for injection. Moreover, early breakthrough of steam and high steam-oil ratio makes it uneconomical, especially in long production time. In this study, a new method, two wells cyclical steam-assisted gravity drainage is compared with a conventional steam-assisted gravity drainage process. Well configuration in two wells cyclical steam-assisted gravity drainage is the same as the... 

We present an analytical model to analyze the influence of carrier dynamics on the static and dynamic responses of transistor laser (TL). Our analysis is based on solving the continuity equation and the rate equations which incorporate the virtual states as a conversion mechanism. We show that the details of the dc and small signal behavior of transistor lasers are strongly affected by the escape and capture times of carriers in quantum well (QW). Also, the effects of carrier recombination lifetime in the quantum well and base regions on the TL static and dynamic performances are investigated  

In this work, the goal is to find the optimum working point for intelligent wells that is equipped with down-hole chokes and producing from a multi-layer reservoir under pressure maintenance process. Two evolutionary optimization algorithms are used and results are compared from different points of view. Therefore, the differential evolution technique and genetic algorithm has been used in conjugation with a reservoir simulator. The overall optimization technique is applied to heterogeneous example problems involving smart and multi segment wells. Improvement of predicted performance, which is as high as 7% in one case is demonstrated for all of the examples studied  

The accurate and precise computational models in order to predict the hole cleaning process is one of the helpful assets in drilling industries. Besides the bulk properties such as the flow velocity, particles average size, cleaning fluid properties, etc., that will affect the cleaning process, there is an unanswered question about the microscopic properties of the particles, particularly those which determines the contact characteristics: Do those play a major role or not? The rudimentary answer is not. The first purpose of the present work is to answer this question via a developed computational fluid dynamics coupled with discrete element method (CFD–DEM) in which the six unknown rolling... 

In recent years, improving oil recovery (IOR) has become an important subject for the petroleum industry. One IOR method is infill drilling, which improves hydrocarbon recovery from virgin zones of the reservoir. Determining the appropriate location for the infill wells is very challenging and greatly depends on different factors such as the reservoir heterogeneity. This study aims to investigate the effect of reservoir heterogeneity on the location of infill well. In order to characterize the effect of heterogeneity on infill well locations, some geostatistical methods, e.g., sequential gaussian simulation, have been applied to generate various heterogeneity models. In particular, different... 

We consider a macroscopic quantum system subjected to an asymmetric double-well potential in a harmonic environment. By using a time-dependent approach, we calculate tunnelling probabilities for the system which contain oscillation effects. To show how one can decide between quantum mechanics and the implications of macrorealism assumptions, a given form of Leggett-Garg inequality is considered. The violation of this inequality occurs for a broader range of the system-environment interactions, compared to previous results obtained for two-level systems. Assuming that the coupling strength between the system and the environment can be controlled with time, one can see the violation even for... 

The vapor extraction (VAPEX) process; a solvent-based enhanced oil recovery process has been found promising for some heavy oil reservoirs. In this work, the VAPEX process is studied using a compositional simulator on a number of single-block and multiple block fractured systems. PVT data of one of an Iranian heavy oil reservoir are used to tune the equation of state. Effects of fracture spacing on the performance of process were studied. It was found that the fracture network enhances the VAPEX process in low-permeability systems by increasing the contact area between solvent and oil contained in the matrix blocks. Also, the fracture network reduced the instabilities in the system pressure... 

For a given finite commutative ring R with 1≠0, one may associate a graph which is called the total graph of R and it is denoted by T(R). This graph has R as the vertex set and its two distinct vertices x and y are adjacent exactly whenever x+y is a zero-divisor of R. In this note, we prove that T(R) is well-covered if and only if either R is local or 2 is a zero-divisor. © 2021 Elsevier GmbH  

The aim of the study was to predict disability, psychological wellbeing, and somatic health in multiple sclerosis (MS) patients with the mediating variable of religiosity. A sample of 128 patients was recruited, and were administered the Expanded Disability Status Scale, the World Health Organization-5 Well-Being Index, the Patient Health Questionnaire-15, and a Self-Rating Scale of Religiosity. Religiosity did not predict disability, psychological well-being, or somatic health. Religiosity was positively associated with MS duration and disability, but only in male patients. The predictors for predicting psychological wellbeing were age, disability, and somatic health. Patients with... 

In this study a review of the developed methods to estimate groundwater withdrawal (GWW) from aquifers by pumping wells is provided. Then, a method adopted by Iran's Basic Studies Bureau of Water Resources Management Company for estimation of GWW through 536 aquifers across Iran is presented and modified. This so-called “representative pumping wells network” (RPWN) approach is a combination of statistical and rate-and-time methods which has been implemented for all aquifers in Iran since 2007. The RPWN approach is based on the overlaying of 10 important features in a GIS environment and classified in a number of zones in which their withdrawals are statistically different. The representative... 

The casing-collapse hazard is one that drilling engineers seek to mitigate with careful well design and operating procedures. However, certain rock formations and their fluid pressure and stress conditions are more prone to casing-collapse risks than others. The Gachsaran Formation in south west Iran, is one such formation, central to oil and gas resource exploration and development in the Zagros region and consisting of complex alternations of anhydrite, marl and salt. The casing-collapse incidents in this formation have resulted over decades in substantial lost production and remedial costs to mitigate the issues surrounding wells with failed casing string. High and vertically-varying... 

During transient tests, both pressure and temperature are changed depending on downhole flow rate. In gas producing wells, Joule-Thomson cooling and frictional heating effects are the main dynamic factors causing flowing bottomhole temperature to differ from the static formation temperature at that depth. When a gas well is shut in, JT cooling effect is vanished and this causes a sharp increase in sandface temperature. As effect of wellbore storage ends, wellbore temperature gradually cools down due to heat conduction with near wellbore region. This paper demonstrates a new technique for using temperature transient data in gas wells in order to determine end of wellbore storage. Also, effect... 

This work examines the operational parameters that may influence the performance of toe-to-heel steamflooding in a laboratory-scale simulation model built on the basis of the fluid and rock samples from a fractured, low-permeable, carbonate heavy oil reservoir in Southwestern Iran, called KEM (Kuh-e-Mond). Using vertical (V) or horizontal (H) injectors (I) and producers (P), the effects of different well configurations including VIVP, VIHP, 2VIHP, VI2HP, HIHP, and HI2HP, injectors' traversal distance, producers' traversal distance, and horizontal producer length have been investigated. In summary, the results show that 2VIHP scheme performs best in terms of oil recovery and areal/volumetric... 

Increasing cuttings bed height is a serious concern during extended-reach well drilling. In order to predict and prevent cuttings bed height increase, it is essential to study how the critical parameters influence the cuttings transport, especially the drill pipe rotation effects on the cuttings transport process. In conventional models for cuttings transport, the dynamic behavior of particles due to drill pipe rotation is neglected or empirically simplified. This paper presents a coupled Computational Fluid Dynamics and Discrete Element Method (CFD-DEM) approach to simulate the cuttings transport considering the dynamic collision process. The fluid phase is treated as an Eulerian continuum... 

In order to maintain the production of offshore oil wells, the National Iranian Oil Company periodically services facilities and equipment located in oil wellheads with mobile wellhead servants. It also gives technical supports to oil wellheads and mobile wellhead servants with supporter vessels. Due to supply limitations, there are not enough special vessels (namely supporter vessels and mobile wellhead servants) compared to the number of oil wellheads. The failure of special vessels to service oil wellheads and supporter vessels to technically support mobile wellhead servants based on a predetermined plan, will lead to considerable loss in production performance of oil wells and hence... 

Production logging is used to evaluate wells production performance. Interpretation of production log data provides velocity profile and contribution of each zone on total production. In multi-phase flow conditions, production log interpretation can be challenging since producing fluids do not have similar densities and travel with different speed depending on fluids properties and wellbore deviation. Production log interpretation in multi-phase producing wells requires identifying downhole flow regimes and determining velocity profile for each phase. There are different flow regimes and velocity models available, which are being used in production log interpretation to determine wells flow...