Sharif Digital Repository

This work investigates the species separation in the rarefied flow of the argon-helium mixture through convergent-divergent micronozzles. Imposing a molecular mass ratio in the order of 10, the flow of this mixture can lead to the formation of serious nonhomogeneous phenomena such as the species separation. This study is performed in the ranges of 2.0-4.0 for the geometrical expansion ratio, 200-400 K for the wall temperature, and 0.003-1.454 for the inlet Knudsen number. The effects of these parameters are examined on the separative performances of micronozzle. The direct simulation Monte Carlo method is selected as the solution method because it can provide reliable solutions in the... 

A numerical model has been developed for studying the flow and heat transfer characteristics of single phase liquid flow through a microchannel. In this work the heat transfer characteristics of pressure driven and electroosmotic flow through microchannels have been studied. The governing equations are the Poisson-Boltzmann and Navier-Stokes equations which have been solved numerically using the standard Galerkin and the Mixed 4-1 finite element methods, respectively. Finally the energy equation is solved numerically using the Stream-wise Upwind Petrov Galerkin (SUPG) method. Two dimensional Poisson-Boltzmann equation was first solved to find the electric potential field and net charge... 

Electroosmosis is the main mechanism for flow generation in lab-on-a-chip (LOC) devices. The temperature rise due to the Joule heating phenomenon, associated with the electroosmosis, may be detrimental for samples being considered in LOCs. Hence, a complete understanding of the heat transfer physics associated with the electroosmotic flow is of high importance in design and active control of LOCs. The objective of the present study is to estimate the temperature rise and the thermal entry length in electroosmotic flow through rectangular microchannels, having potential applications in LOC devices. Along this line, the power-law rheological model is used to account for non-Newtonian behavior... 

The present study examines Alternating Current (AC) electroosmotic flows in a parallel plate microchannel subject to constant wall temperature. Numerical method consists of a central finite difference scheme for spatial terms and a forward difference scheme for the temporal term. Asymmetric boundary conditions are assumed for Poison-Boltzmann equation for determining the electric double layer (EDL) potential distribution. The potential distribution is then used to evaluate the velocity distribution. The velocity distribution is obtained by applying slip boundary conditions on the walls which accounts for probable hydrophobicity of surfaces. After determining the velocity distribution... 

In this work, we study the gas mixing behavior in a micro T-mixer using the direct simulation Monte Carlo (DSMC) method. The gas mixing process is monitored through a T-mixer, which is fed by two different CO and N2 gases; flowing into the T-mixer through the upper and lower inlets. We investigate the effects of axial and lateral wall temperature gradients on the mixing evolution at different rarefaction levels. The achieved results show that any temperature difference between the channel walls would result in an increase in mixing length for the chosen wall temperature gradient ranges and the studies pressure cases. Our observations show that a positive temperature gradient toward the... 

Thermally developing mixed electroosmotically and pressure-driven flow in a parallel plate microchannel with a step change in wall temperature is considered in the framework of an extended Graetz problem. Both Joule heating and viscous dissipation effects are taken into consideration. Expressions for the dimensionless temperature and Nusselt number in the form of infinite series are presented. In general, the associated eigenvalue problem is solved numerically. Nevertheless, an analytical solution is also presented for axial locations close to the entrance. Comparisons are made between the present results and those obtained by approximating the electroosmotic velocity with the... 

In this study, a jet propulsion JP combustor is studied numerically to investigate the combustor wall temperature influences on the soot characteristics emitted at its exhaust. There are a number of ways to control the combustor wall temperatures benefiting from different wall cooling technologies. Irrespective of using different high technology cooling systems, it is important to recognize how the wall temperature can affect the soot emission from one specific JP engine. Before examining the main combustor, it is important to assess the accuracy of the computational fluids dynamics (CFD) tool via solving a benchmark problem. In this regard, the predicted flame structure for the benchmark... 

The analytical study of microchannels has been considered as a preliminary approach to alleviate the difficulties which are normally encountered in numerical and experimental studies. Among the analytical solutions, those with high robustness and low complexities are certainly more attractive. In this work, we present a theoretical approach to predict the temperature field in micro-Poiseuille channel flow with constant wall temperature. The use of power series method simplifies the solution in the current analytical approach. The current analytical derivations are examined for channels with both hot-wall and cold-wall conditions. The current solutions agree well with the numerical solutions... 

A computer-controlled pilot plant has been constructed to study the dynamical behavior and control of the thermal cracking furnace. The governing equations that describe the furnace dynamics are presented, and, based on these equations and a kinetic model, software that simulates the steady-state behavior of the system has been developed. The furnace is divided into eight zones that can be heated independently, and, therefore, any desired temperature profile can be applied. The variables to be measured are the furnace zone temperature, coil outlet temperature (COT), and product yield. Two different control strategies (namely, COT control and furnace wall temperature control) are applied... 

In this paper, we study the frost formation and growth at the walls of a duct with uniform wall temperature variation. The simulation is performed for laminar flow regime considering suitable semi-empirical models incorporated with computational fluid dynamics (CFD) method. The frost growth is considered to be normal to the duct surface. Since the duct aspect ratio is high, we perform our simulations in two-dimensional zones. To simulate the frost layer properly, we solve both the energy and mass balance equations implementing some semi-empirical correlations on the frost side. At this stage, we suitably predict the required heat flux value at the solid boundary and the heat transfer... 

In this article, mixed-convective heat transfer of nanofluids in a vertical channel partially filled with highly porous medium was studied. In the porous region, the Brinkman-Forchheimer extended Darcy model was used to describe the fluid flow pattern. Different viscous dissipation models were also applied to account for viscous heating. At the porous medium-fluid interface, interfacial coupling conditions for the fluid velocity and temperature were used to derive the analytical solution using a two-parameter perturbation method. The model used for the nanofluids incorporates the effects of Brownian motion and thermophoresis. With constant wall temperature, velocity and temperature profiles... 

Among major components of LiBr-H 2O absorption chillers is the absorber, which has a direct effect on the chillier size and whose characteristics have significant effects on the overall efficiency of absorption machines. In this article, heat and mass transfer process in absorption of refrigerant vapor into a lithium bromide solution of water-cooled incline plate absorber in the Reynolds number range of 5