Sharif Digital Repository

In this paper we make use of M-band discrete wavelet transform (MDWT) and Wiener filter for speckle noise suppression of ultrasound images. Assuming multiplicative model for speckle noise, by applying logarithmic transform to noisy observation we convert multiplicative noise to additive one. Then, speckle noise can be reduced by taking the M-band wavelet transform of log-transformed observation and employing an adaptive thresholding technique. In order to improve the performance of this denosing approach, we propose a preprocessing stage which exploits Wiener filtering. Through this stage logtransformed observation is separated into two images and then each of these two images is denoised... 

Generally in the drilling of modern aviation materials such as nickel and titanium base super alloys, problems frequently occur in terms of burr formation at the cutter exit, tool stress, high heat generation on tool surface as well as low process reliability. A recent and promising method to overcome these technological constraints is the use of ultrasonic assistance, where high-frequency and low-amplitude vibrations are superimposed on the movement of cutting tools. This paper presents the design of an ultrasonically vibrated tool holder and the experimental investigation of ultrasonically assisted drilling of Inconel 738-LC. The circularity, cylindricity, surface roughness and hole... 

Calcium titanate-CaTiO3 (perovskite) has been used in various industrial applications due to its dopant/doping mechanisms. Manipulation of defective grain boundaries in the structure of perovskite is essential to maximize mechanical properties and stability; therefore, the structure of perovskite has attracted attention, because without fully understanding the perovskite structure and diffracted planes, dopant/doping mechanisms cannot be understood. In this study, the areas and locations of atoms and diffracted planes were designed and investigated. In this research, the relationship between Young’s modulus and planar density of unit cell, super cells (2 × 2 × 2) and symmetry cells of nano... 

In the area of life assessment, none-destructive methods of inspection and evaluation (NDI/NDE) play important role to ensure if astructure is still healthy enough to get used of. Using ultrasonic stress waves is one of the easiest and cheapest methods of NDI. Accordingly, different modes of lamb wave are mostly of interest..There are various methods for generating lamb waves. One of these methods is using piezoelectric wafer actuator/sensors (PWAS). Accordingly, one of the most important parts of this method is to generate right mode via an appropriate choose of actuating frequency. In this text using a new method for finding tuning frequencies of different lamb wave modes proposed. For... 

It is proved that the endothelial (artery inner lumen cells) function is associated with cardiovascular risk factors. Among all the common non-invasive methods employed in the research setting for assessing endothelial function, flow-mediated dilation is the most widely used one. This technique measures endothelial function by inducing reactive hyperemia using temporary arterial occlusion and measuring the resultant relative increase in blood vessel diameter via ultrasound. In this paper, the limitations associated with the ultrasound technique are overcome by using the photoplethysmogram (PPG) signal recorded during FMD. The correctness of this approach is investigated by modeling the AC... 

In this paper, a new technique based on nonlinear resonance of microbubbles is investigated in order to estimate the amplitude of an ultrasound wave pressure field. First, the existing theoretical model is reviewed. Then, an experimental setup consisting of a bubble generator and transmitting/receiving ultrasound transducers operating in the 1 MHz frequency range is described. The effect of background noise is also taken into account. Results show that the second harmonic oscillations are detectable, paving the way to develop a quantitative method for in vivo calibration of ultrasound waves  

In this research work, an ultrasonic assisted drilling system is employed to apply both rotation and vibration to drill bits. The transducer horn transfers power very efficiently and changes tools effortlessly. The setup used to conduct drilling tests is Inconel 738LC with depth-to-diameter ratios from 2 to 10 by conventional drilling (CD), ultrasonic assisted drilling (UAD), and electro discharge drilling (EDD). The effects of ultrasonic vibration amplitude, spindle speed, and number of steps to drill each hole on machining force and surface roughness in UAD are investigated. The results demonstrate not only a significant improvement in tool life (by applying ultrasonic vibration to the... 

Endothelial dysfunction, which can be noninvasively assessed by flow mediated vasodilation (FMD), predicts an increased rate of adverse cardiovascular events. The endothelial dysfunction is considered as a leading cause of development and progression of the atherosclerotic process. The main aim of this study is to review different non-invasive methods to assess the endothelial dysfunction and to propose enhancements to a new method based on photoplethysmography (PPG). First, non-invasive techniques developed for the evaluation of peripheral endothelial function (including the Doppler ultrasound (US)) will be reviewed. Although noninvasive, US -based techniques present a few disadvantages. To... 

Noninvasive measurement of brachial artery (BA) flow mediated dilation (FMD), commonly measured by high resolution ultrasonography, has provided a non-invasive means for the evaluation of endothelial function. Recently, another technique based on finger photopletysmogram (PPG) analysis has been proposed by the authors. In this paper, simultaneous measurement of BA FMD and PPG signals data from 86 human subjects (43 healthy and 43 risk) is analyzed and a statistical model is proposed to estimate the BA FMD based on PPG signals, the BA diameter at baseline as well as other demographics factors such as age and gender. Linear regression by multivariate analysis was conducted to obtain the... 

3D imaging technologies are applied in numerous areas, including self-driving cars, drones, and robots, and in advanced industrial, medical, scientific, and consumer applications. 3D imaging is usually accomplished by finding the distance to multiple points on an object or in a scene, and then creating a point cloud of those range measurements. Different methods can be used for the ranging. Some of these methods, such as stereovision, rely on processing 2D images. Other techniques estimate the distance more directly by measuring the round-trip delay of an ultrasonic or electromagnetic wave to the object. Ultrasonic waves suffer large losses in air and cannot reach distances beyond a few... 

A multi-residue method using gas chromatography coupled with flame ionisation detector has been developed for simultaneous determination of 10 pesticides in milk. The methodology involved a sample clean-up procedure using ‘quick, easy, cheap, effective, rugged and safe’ followed by a preconcentration step based on dispersive liquid–liquid microextraction. In this regard, acetonitrile was added to the milk sample with specific pH and ionic strength, and the mixture was rigorously shaken. The extracts were centrifuged; then, the organic phase (acetonitrile) was transferred to a test tube and was mixed with deionised water. The mixture was sonicated and chloroform was added as an acceptor phase... 

Low accuracy, requirement of expensive instruments, derivatization and multi-step sample preparation, inconsistencies during the fabrication process, time-consuming procedures and utilization of eco-unfriendly chemicals are some limitations of various developed methods for detection of 4-methylimidazol (4-MeI). Herein, a rapid and miniaturized fluorescent probe based on the ultrasound‒assisted formation of carbon dots (CDs) in a metallic deep eutectic solvent (MDES) was developed and conveniently implemented to detect 4-MeI in commercial dark soft drinks. In-situ synthesis of CDs-chelated metals in the presence of the target analyte facilitates a kinetically fluorescence emission with no... 

In this paper, the relationship between the position of ultrasound transducers from the photoacoustic source and the reconstructed image is investigated. Our studies have shown that the distance of the transducer and its location from the photoacoustic source specifically affects and is closely related to the quality of the reconstructed image of the source. Also, we introduce a concept called blind angle for photoacoustic computed tomography (PACT) that have planar or circular limited-view geometry. Complete and accurate equations of this relationship are presented in this paper for all different 2D photoacoustic geometries. The main source of these equations is the spherically of the... 

A multi-residue method using gas chromatography coupled with flame ionisation detector has been developed for simultaneous determination of 10 pesticides in milk. The methodology involved a sample clean-up procedure using ‘quick, easy, cheap, effective, rugged and safe’ followed by a preconcentration step based on dispersive liquid–liquid microextraction. In this regard, acetonitrile was added to the milk sample with specific pH and ionic strength, and the mixture was rigorously shaken. The extracts were centrifuged; then, the organic phase (acetonitrile) was transferred to a test tube and was mixed with deionised water. The mixture was sonicated and chloroform was added as an acceptor phase... 

Today, structural Health monitoring is a major concern in the engineering community. Multisite fatigue damage, hidden cracks and corrosion in hard-to-reach locations are among the major flaws encountered in today's extensive diagnosis and/or prognosis of aircraft structures. Ultrasonic waves, lamb waves are particularly advantageous because of their propagation at large distances with little damp in thin-wall structures. In this paper a new rectangular shape array of embedded piezoelectric sensors is developed to detect some damages in large planar structures. An artificial neural network is trained to identify the damage state and its location. Output signals of each sensor due to various... 

A body insonified by a constant (time-varying) intensity sound field is known to experience a steady (oscillatory) force that is called the steady-state (dynamic) acoustic radiation force. Using the classical resonance scattering theorem (RST) which suggests the scattered field as a superposition of a resonance field and a background (non-resonance) component, we show that the radiation force acting on a cylindrical shell may be synthesized as a composition of three components: background part, resonance part and their interaction. The background component reveals the pure geometrical reflection effects and illustrates a regular behavior with respect to frequency, while the others... 

In recent years, new Structural Health Monitoring (SHM) methodologies with a concept of "instantaneous baseline damage detection" are being developed by many researchers. In this context, this paper uses a new method to identify multiple damage in the aluminum plate. For this goal use from spars PZWS sensor network to generate and received guided waves. Ultrasonic waves are generated and measured from all possible different pairs of excitation and sensing transducers. For feature extraction of received signals used from continues wavelet transform. A probabilistic damage diagnostic algorithm based on correlation analysis was investigated to locate single or multiple damages. In this study,... 

In practice, photoacoustic (PA) waves generated with cost-effective, low-energy laser diodes, are weak and almost buried in noise. Reconstruction of an artifact-free PA image from noisy measurements requires an effective denoising technique. Averaging techniques are widely used to increase the signal-to-noise ratio (SNR) of the weak PA signals but the process is time-consuming and in case of very low SNR measurements, hundreds/thousands of data acquisition epochs needed to provide the required data In this study, we propose to use adaptive denoising methodology in which adaptive line enhancers (ALE) has been embedded for increasing the SNR of PA signals in very low-cost PA systems. Our... 

The present study has reported an optimized fabrication and application of a novel PVA/TEOS/Schiff base nanofibers membrane as a highly sensitive copper (II) ions in aqueous environment. Here in, for first time, an ultrasound-assisted synthesized symmetric Schiff base has been immobilized on a hybrid polyvinyl alcohol (PVA) and TEOS using electrospinning technique for detection and filtration of copper ions. For this purpose, various working parameters were evaluated and finally the optimized nano fibers membrane was synthesized with 72 nm thickness and PVA/TEOS/Schiff base ratio of (wt%) 8:6:1. The optimized sample named PTLNFM has been employed successfully as an ultra sensitive... 

A chemically modified carbon-paste electrode (CPE) is prepared by incorporating congo red (CR) immobilized on multi-walled carbon nanotube (MWCNT). The results show that CR is effectively immobilized on the surface of MWCNT under the ultrasonic agitation in aqueous solution and further incorporating the nafion. The prepared electrode, due to the electrostatic repulsions between the CR and ascorbate anion, is capable to mask the response of the ascorbic acid (AA) completely and provide an effective method for the detection of minor amounts of uric acid (UA) in the presence of high concentrations of AA. On the other hand, an increase in the microscopic area of the electrode by addition of...