Sharif Digital Repository

Lignocellulosic materials are recalcitrant to bioconversion, due to their rigid physiochemical structure. In this work, the effects of Fe2O3–TiO2 and NiO–TiO2 nanoparticles (NPs) and FeCl3 and NiCl2 salts, on the anaerobic digestion (AD) of wheat straw have been investigated. For this purpose, metal oxide-TiO2 NPs were synthesized and fully characterized. Results showed that addition of 0.252 mg of NiO–TiO2/g total solids (TS) to batch assays resulted in increase of soluble chemical oxygen demand (COD) and 67% increase in volatile fatty acids (VFAs) concentration compared to control tests during the first 4 days of experiments. These results indicate that hydrolysis and acidogenesis rates... 

Sufficient quantity of trace metals is essential for a well performing anaerobic digestion (AD) process. Among the essential trace elements in active sites of multiple important enzymes for AD are iron and nickel ions. In the present study, iron and nickel in the form of Fe2O3 and NiO were coated on TiO2 nanoparticles to be used in batch and continuous operation mode. The effect of TiO2, Fe2O3–TiO2, and NiO–TiO2 nanoparticles on each step of AD process was assessed utilizing simple substrates (i.e. cellulose, glucose, acetic acid, and mixture of H2–CO2) as well as complex ones (i.e. municipal biopulp). The hydrolysis rate of cellulose substrate increased with higher dosages of the coated... 

This work describes a novel Fe3O4@SiO2@polypyrrole magnetic nanocomposite and its application in the preconcentration of Cd(ii) and Ni(ii) ions. The parameters affecting the preconcentration procedure were optimised by a Box-Behnken design using response surface methodology. Three variables (extraction time, magnetic sorbent amount, and pH) were selected as the main factors affecting the sorption step, while four variables (type, volume and concentration of the eluent, and elution time) were selected as the main factors in the optimisation study of the elution step. Following the sorption and elution of analytes, the ions were quantified by FAAS. The limits of detection were 0.3 and 1.2 ng... 

Laser induced breakdown spectroscopy and subsequent acoustic response during microplasma formation are employed to identify cancerous human breast tissues. The characteristic optical emissions identify Ca, Na, and Mg rich species in cancerous tissues compared to those of healthy ones. Furthermore, we show that the characteristic parameters of the microplasma, generated on the unhealthy tissues, are elevated. We report higher decibel audio signals emanating from laser induced microplasma and a subsequent audio blueshift for malignant tissues. The higher abundance of trace elements in cancerous tissues as well as higher plasma temperature and electron density in laser induced microplasma... 

Nanotechnology is gaining more attention in biotechnological applications as a research area with a huge potential. Nanoparticles (NPs)can influence the rate of anaerobic digestion (AD)as the nano-sized structures, with specific physicochemical properties, interact with substrate and microorganisms. The present work has classified the various types of additives used to improve the AD processes. Nanomaterials as new additives in AD process are classified into four categories: Zero-valent metallic NPs, Metal oxide NPs, Carbon based nanomaterials, and Multi-compound NPs. In the following, application of nanomaterials in AD process is reviewed and negative and positive effects of these materials... 

The main goal of this research is to use the biomass productivity, carbohydrate content, and carbohydrate productivity as useful responses for optimization of macronutrients concentrations (K2HPO4, NaHCO3, and NaNO3) in cultivation of Spirulina microalgae as a feedstock for bioethanol production. In this study, individual and synergistic effects of medium components on the mentioned responses were investigated. The culture medium was optimized using central composite design for achieving the maximize biomass productivity (165 mg L−1 day−1 at K2HPO4: 438 mg L−1, NaHCO3: 15.92 g L−1, and NaNO3: 0.5 g L−1), carbohydrate content (42.0% of dry mass at K2HPO4: 192 mg L−1, NaHCO3: 5.71 g L−1, and... 

In this study, the impacts of salinity, ion type, and aging process were investigated on coalescence and spreading of crude oil interfaces (including an oil droplet and an oil film) under gravity, through drop rest time measurement techniques, aided by an image analysis system. Three different salt solutions of NaCl, Na2SO4, and MgCl2 were studied at different ionic strengths, ranged from 1% to 150% of Persian Gulf seawater ionic strength. According to the results, aging the oil droplet in the brine increased the interfacial rigidity. Addition of a gas phase - by thinning the surface oil film - almost doubled both rest time and spreading time values. In the aged mode, the presence of salt in... 

In the present work, we investigated the characteristics of polycyclic aromatic hydrocarbons (PAHs) and metal(loid)s in indoor/outdoor PM10, PM2.5, and PM1 in a retirement home and a school dormitory in Tehran from May 2012 to May 2013. The results indicated that the annual levels of indoor and outdoor PM10 and PM2.5 were much higher than the guidelines issued by the World Health Organization (WHO). The most abundant detected metal(loid)s in PM were Si, Fe, Zn, Al, and Pb. We found higher percentages of metal(loid)s in smaller size fractions of PM. Additionally, the results showed that the total PAHs (ΣPAHs) bound to PM were... 

With over 8 million inhabitants and 4 million motor vehicles on the streets, Tehran is one of the most crowded and polluted cities in the Middle East. Frequent exceedances of national daily PM2.5 limit have been reported in this city during the last decade, yet, the chemical composition and sources of fine particles are poorly determined. In the present study, 24-hour PM2.5 samples were collected at two urban sites during two separate campaigns, a one-year period from 2014 to 2015 and another three-month period at the beginning of 2017. Concentrations of organic carbon (OC), elemental carbon (EC), inorganic ions, trace metals and specific organic molecular markers were measured by chemical... 

Implementation of metal organic frameworks (MOFs) in the separation science has attracted many researchers attention. In this study, the role of metal, ligand, the reaction condition and modification on the extraction efficiency of some MOFs was investigated. Among the prevalent reported MOFs, some members of the MIL and MOF–5 families were chosen, and eleven MOF–based sorbents were prepared by changing the metal and ligand type, reaction condition, and/or functionality through post synthetic modification (PSM). MIL–101 and MIL–101–NH2 based structures were initially synthesized based on the chromium and iron salts. Also, three zinc–based structures including MOF–5, [NH2(CH3)2]2...