Sharif Digital Repository

Microbiological analyses of soil chronically exposed to petroleum complex compounds of some oil springs in south of Iran resulted in isolation and purification of a new native thermophilic strain which is capable to desulfurize petroleum sulfur compounds by 4-S mechanism. Dibenzothiophene (DBT) was selected as a complex sulfiir compound model and many experiments were done to identify the metabolic pathway. The results of these experiments show that DBT is ultimately converted to 2-hydroxybiphenyl (2-HBP) and sulfite. This is a special metabolic pathway in that there is no effect on the carbon skeleton of organic compounds and would be ideal for desulfurization to upgrade the petroleum... 

An experimental study was conducted to investigate the extraction of oxidized sulfur compounds from gas oil. Solvents used for this purpose included acetone, acetonitrile, methanol and propanol. The effect of solvent concentration, solvent to gas oil ratio, temperature, time and number of stages was studied. To select the best solvent and conditions for extraction, two criteria were considered: high desulfurization and more hydrocarbon recovery. Results showed that extraction time and temperature have no significant effect. Methanol for low ability of extraction of oxidized sulfur compounds and propanol for low hydrocarbon recovery were excluded from further experiments. After the tests, the... 

Most sulfide oxidizing bioreactors are based on pure cultures or artificial mixes of microorganisms with strict requirements for growth, which make the system unstable and do not guarantee their long term performance. The ultimate goal of this study is to develop a natural mix of chemotrophic bacteria that may be applied anaerobically for the treatment of sour gas. Activated sludge from local municipal wastewater treatment plant that was maintained in endogenous anaerobic conditions for one year was used in this study. Total suspended solids (TSS) and volatile suspended solids (VSS) of the sludge was 22 gl-1 and 14.3 gl-1, respectively. A glass culture vessel had a volume of 0.65 L was used... 

Electrodeposition of the Co-Ni/Cu multilayer films was carried out in sulfate solution. Cyclic voltammetry and current transient techniques were utilized to characterize the multilayer system and to obtain the nucleation and growth mechanism. The cyclic voltammograms clearly showed that electrodeposition of cobalt-nickel alloy layer was controlled by a kinetic process, where copper ions were reduced under diffusion-controlled mechanism. In addition, the current transients revealed that nucleation mechanism was instantaneous with a typical three-dimensional growth process. The microstructure of the Co-Ni/Cu films was also changed with overpotential. In this system, the growth of multilayer... 

We proposed a model to investigate the transient diffusion of drug (sulphate) into the intervertebral disc. Using finite element method, drug diffusion was simulated and the concentration of diffused drug in each region of disc including Nucleus pulpous (NP), Inner annulus fibroses (IA), and Outer annulus fibroses (OA) was measured. In addition, to investigate the role of CEP permeability on the amount of diffused drug, model was simulated with different cartilage endplate (CEP) permeability. Having obtained concentration distribution for different cases, it was clearly shown that the amount of diffused drug is affected by the endplate permeability and the more permeable CEP, the more... 

Although the capability of using sulfate anion as a wettability modiffier is well established, no systematic investigation on the effect of sulfate ions and natural surfactants in the crude oil including asphaltene and resin on the interfacial tension (IFT) of acidic crude oil (ACO)/sulfate were performed. In this regards, the fluid/fluid interactions are tested through the IFT measurements for ACO, asphaltene and resin extracted from ACO in the presence of sulfate salts including Na2SO4, MgSO4 and CaSO4 while the concentration of each salt ranges between 0 and 45000 ppm. The obtained results demonstrate that the capability of asphaltene molecules is higher for IFT reduction compared with... 

In the present study, photo-Fenton degradation of catechol from aqueous solution was carried out using UV light and iron ions (Fe2+) as activators of persulfate (PS). Catechol degradation from solution was studied under different experimental variables such as solution pH (2.0–10.0), iron dosages (0.1–0.5 g/L), persulfate loadings (1.0–5.0 mM), initial catechol concentrations (20–100 mg/L) and scavengers (TBA and IPA). The comparative study of catechol removal showed that among the applied approaches, the order of degradation of catechol is as follows: PS/Fe2 +/UV > PS/Fe2 + > UV/PS > PS > UV. Furthermore, higher catechol degradation was observed with increasing iron dosage and PS... 

Abstract: We report robust green synthesis of novel 1,2,3-triazole-based sulfonamides bearing different motifs such as fluorine under click conditions in presence of a copper-based magnetically recoverable and reusable heterogeneous nanocatalyst. The organocopper catalyst at 0.5 mol.% was highly recyclable (up to five times) when recovered using an external magnet without significant loss in catalytic activity. The mild reaction conditions and excellent yields (69–95 %) make this protocol an attractive method for efficient synthesis of the title compounds. The structure of product 3a was determined by Röntgen crystal structure analysis. Graphical Abstract: [Figure not available: see... 

Oxido-peroxido W(VI)-histidine–MgAl-layered double hydroxide composite was prepared by using MgAl-layered double hydroxide as a host and oxido-peroxido W(VI)-histidine complex as a guest. The composite was characterized by XRD, IR, EDX,SEM and TEM techniques. This composite is tested for catalytic selective sulfoxidation reactions using hydrogen peroxide as oxidant showing good to moderate conversion along with high selectivity. Copyright © 2018 John Wiley & Sons, Ltd  

Direct extraction of molybdenum from sulfate solution with synergistic extractants (mixture of D2EHPA and TBP) was studied in the rotation column. The influence of extractant concentration and initial pH of aqueous phase was studied in the bench scale experiments. The outcomes demonstrated that the synergistic solvent extraction enhances the constancy of the extracted complexes for transfer into the organic phase. In the continuous experiments, the effect of different operating parameters such as speed of agitation, inlet solvent flow rate and inlet aqueous flow rate on the holdup, mean drop size, drop size distribution, slip and characteristic velocities and extraction percentage were... 

The electrodeposition of cobalt, nickel and Ni-Co alloys was studied by electrochemical techniques. Cyclic voltammetry and current transient measurements were used to characterize the Co-Ni system in other to obtain the nucleation and growth mechanism. The cyclic voltammetry results clearly showed that electrodeposition of cobalt, nickel and Co-Ni alloy is diffusion-controlled process with a typical nucleation mechanism. The redox potentials of the Co and Ni are shifted to more cathodic potentials in the Co-Ni alloy system. In addition, the current transients revealed that nucleation mechanism is instantaneous with a typical three-dimensional (3D) nucleation and growth process. The number of... 

Catalytic decomposition of the ethyl mercaptan over an H-ZSM-5 zeolite in a newly designed microreactor was undertaken in this study. A numerically developed distributor possessing superior flow distribution was amended to 24 parallel microchannels with 64 mm length, 700 μm width, and 600 μm depth. Ethyl mercaptan complete conversion required 350 °C through the developed microreactor while in a conventional fixed-bed-reactor 400 °C was needed. Higher selectivity towards the main products of this decomposition (hydrogen sulfide and ethylene) were observed in this microreactor in comparison to that of a fixed-bed-reactor. In addition, lower selectivity towards formation of byproducts was... 

The electrodeposition of cadmium is studied by electrochemical techniques with the presence of the organic agents. The cyclic voltammetry results clearly show that the electrodeposition of cadmium is a diffusion-controlled process associated with a typical nucleation process. With addition of the thiourea, 3-Picolin and benzyl alcohol organic agents simultaneously in sulfate solution, the redox potential of cadmium is shifted to more negative potentials. In this case, the current transients reveal an instantaneous nucleation with a typical three-dimensional (3D) growth mechanism, while it shows progressive nucleation mechanism without the ternary-species organic agents. In addition, the... 

Metal pH50 and ΔpH50 values were determined and compared for a number of organic systems to select a synergistic system for the separation of Cd from Zn. The largest ΔpH50(Zn-Cd) value was obtained with HRJ-4277 (nonylsalicylic acid)/Cyanex 471X (triisobutyl phosphine sulphide or TIBPS) system and reached 1.53 pH units, indicating excellent separation of Cd from Zn with this system. Shellsol 2046 was chosen as the diluent of the system due to its larger ΔpH50(Zn-Cd) and excellent phase separation compared with other diluents. Distribution isotherms and subsequent McCabe-Thiele diagrams indicate that 99% Cd could be extracted in two stages at pH 3.80 and A / O ratio of 1.5 : 1. The extraction... 

Deposition of barium sulfate (or BaSO4) has already been recognized as a devastating problem facing process industries and oilfield operations, mainly owing to its low solubility in aqueous solutions. Predicting and also preventing the overall damage caused by BaSO4 precipitation requires a profound knowledge of its solubility under different thermodynamic conditions. The main aim of this study is to develop a solubility prediction model based on a hybrid of least squares support vector nachines (LSSVM) and coupled simulated annealing (CSA) aiming to predict the solubility of barium sulfate over wide ranges of temperature, pressure and ionic compositions. Results indicate that predictions of... 

Supported iron oxide nanoparticles are found to be efficient and recoverable catalyst in the selective oxidation of thiols to their corresponding disulfides using hydrogen peroxide as green oxidant at room temperature. The protocol features an easy work-up, simplicity and the utilizing mild reaction conditions, as well as high selectivity toward disulfides, are highly advantageous compared to alternative reported methodologies. The supported iron oxide nanoparticles could be easily recovered and reused several times without any loss of activity. ICP-MS results prove that there is no metal leaching observed, and demonstrating the stability of the catalyst under the reaction conditions  

We have evaluated the catalytic activity of a molybdenum(VI) oxo-peroxo complex through the oxidation and reduction of sulfur-based compounds. Arylalkyl, diaryl and dialkyl sulfides are selectively oxidized to corresponding sulfoxides, with tert-butyl hydroperoxide (TBHP), in the presence of MoO(O 2)(phox) 2 complex as catalyst. This molybdenum complex was also found to be an efficient catalyst for the deoxygenation of sulfoxides to sulfides with PPh 3 in excellent yields and chemoselectivity  

A novel cellulose supported copper NHC complex has been prepared by the reaction of cellulose supported imidazolium salt with copper(i) iodide. The catalyst is active in the synthesis of 1,2,3-triazoles via a one-pot reaction of alkyl/benzyl halides or tosylates and terminal alkynes, with sodium azide in water