Sharif Digital Repository

Hyperelastic materials have high deformability and nonlinearity in load-deformation behavior. Based on a phenomenological approach, these materials are treated as a continuum, and a strain energy density is considered to describe their hyperelastic behavior. In this paper, the mechanical behavior characterization of these materials is studied from the continuum viewpoint. For this purpose, the strain energy density is expressed as sum of independent functions of the mutual multiple of principal stretches. These functions are determined by applying the governing postulates on the form of the strain energy density. It is observed that a consistent strain energy density is expressible in terms... 

Rubberlike materials are characterized by high deformability and reversibility of deformation. From the continuum viewpoint, a strain energy density function is postulated for modeling the behavior of these materials. In this paper, a general form for the strain energy density of these materials is proposed from a phenomenological point of view. Based on the Valanis-Landel hypothesis, the strain energy density of incompressible materials is expressed as the sum of independent functions of the principal stretches meeting the essential requirements on the form of the strain energy density. It is cleared that the appropriate mathematical expressions for constitutive modeling of these materials... 

In this article, a strain energy density function of the Saint Venant-Kirchhoff type is expressed in terms of a Lagrangian deformation measure. Applying the governing postulates to the form of the strain energy density, the mathematical expression of this measure is determined. It is observed that this measure, which is consistent with the strain energy postulates, is a strain type with the characteristic function more rational than that of the Seth-Hill strain measures for hyperelastic materials modelling. In addition, the material parameters are calculated using a novel procedure that is based on the correlation between the values of the strain energy density (rather than the stresses)... 

In this paper, a new multi-scale approach is presented based on the modified boundary Cauchy-Born (MBCB) technique to model the surface effects of nano-structures. The salient point of the MBCB model is the definition of radial quadrature used in the surface elements which is an indicator of material behavior. The characteristics of quadrature are derived by interpolating data from atoms laid in a circular support around the quadrature, in a least-square scene. The total-Lagrangian formulation is derived for the equivalent continua by employing the Cauchy-Born hypothesis for calculating the strain energy density function of the continua. The numerical results of the proposed method are... 

In this paper, a novel multi-scale approach is developed for modeling of the surface effect in crystalline nano-structures. The technique is based on the Cauchy-Born hypothesis in which the strain energy density of the equivalent continua is calculated by means of inter-atomic potentials. The notion of introducing the surface effect in the finite element method is based on the intrinsic function of quadratures, called as an indicator of material behavior. The information of quadratures is derived by interpolating the data from probable representative atoms in their proximity. The technique is implemented by the definition of reference boundary CB elements, which enable to capture not only... 

Carbon nanotubes (CNTs) with and without end caps may be used for fluid storage and transport, respectively, referred to as CNT-nanovessel and CNT-nanopipe. The determination of the stiffness in the hoop (circumferential) and radial directions, ideal hoop strength, and hoop stress-strain curve of such nanostructures is of particular interest. Due to the proposed viewpoint, a chiral free-standing single-walled CNT (SWCNT) has a natural angle of twist and natural extension along the axis of the tube. For example, for the SWCNT (9,3) with diameter of 0.85 nm and chirality angle of 13.9°, the natural angle of twist per unit length is 1.45×10-3 rad/nm. Previously, only Vercosa et al. (2010) who... 

The growth of slant cracks by fretting fatigue of a half plane in contact with a flat rounded pad was studied. The mode I and mode II stress intensity factors for cracks of various lengths and directions were calculated using the semi-analytical method of the distribution of dislocations, and their cumulative effect on the crack growth was investigated using the strain energy density criterion. The results showed dominance of mode I fracture on crack growth, and based on the observation of strain energy density factor versus crack orientation, the results also suggest that depending on the crack length, the most critical orientations of cracks are at 0° to 20° outward the contact zone. Good... 

A transverse-plane hyperelastic micromechanical model of brain white matter tissue was developed using the embedded element technique (EET). The model consisted of a histology-informed probabilistic distribution of axonal fibers embedded within an extracellular matrix, both described using the generalized Ogden hyperelastic material model. A correcting method, based on the strain energy density function, was formulated to resolve the stiffness redundancy problem of the EET in large deformation regime. The model was then used to predict the homogenized tissue behavior and the associated localized responses of the axonal fibers under quasi-static, transverse, large deformations. Results... 

In this paper, a hierarchical multi-scale technique is developed to investigate the thermo-mechanical behavior of nano-crystalline structures in the presence of edge dislocations. The primary edge dislocations are generated by proper adjustment of atomic positions to resemble discrete dislocations. The interatomic potential used to perform atomistic simulation is based on the Finnis-Sinclair embedded-atom method as many-body potential and, the Nose-Hoover thermostat is employed to control the effect of temperature. The strain energy density function is obtained for various representative volume elements under biaxial and shear loadings by fitting a fourth order polynomial in the atomistic... 

In this paper, a continuum–atomistic multi-scale method is presented in modeling the nonlinear behavior of nano-materials under large deformation. In order to identify an appropriate strain energy function for crystalline nano-structures with different percentages of spherical voids, the hyperelastic method is employed for specimen whose behavior is determined based on the molecular dynamics analyses. In the atomistic level, the EAM many-body potential is employed to model the interactions between the atoms of Al RVEs. The atomistic strain energy density curves and surfaces are generated by applying the uniaxial, biaxial and simple shear deformations to the boundaries of RVEs. The material... 

This paper presents a bi-directional closed-form analytical solution, in the framework of nonlinear soft composites mechanics, for top-down hyperelastic characterization of brain white matter tissue components, based on the directional homogenized responses of the tissue in the axial and transverse directions. The white matter is considered as a transversely isotropic neo-Hookean composite made of unidirectional distribution of axonal fibers within the extracellular matrix. First, two homogenization formulations are derived for the homogenized axial and transverse shear moduli of the tissue, based on definition of the strain energy density function. Next, the rule of mixtures and... 

In this paper, a micromechanical model for connective soft tissues based on the available histological evidences is developed. The proposed model constituents i.e. collagen fibers and ground matrix are considered as hyperelastic materials. The matrix material is assumed to be isotropic Neo-Hookean while the collagen fibers are considered to be transversely isotropic hyperelastic. In order to take into account the effects of tissue structure in lower scales on the macroscopic behavior of tissue, a strain energy density function (SEDF) is developed for collagen fibers based on tissue hierarchical structure. Macroscopic response and properties of tissue are obtained using the numerical... 

In this research, the nonlinear elastic behavior of human extensor apparatus was investigated. To this goal, firstly the best material parameters of hyperelastic strain energy density functions consisting of the Mooney–Rivlin, Ogden, invariants, and general exponential models were derived for the simple tension experimental data. Due to the significance of stress response in other deformation modes of nonlinear models, the calculated parameters were used to study the pure shear and balance biaxial tension behavior of the extensor apparatus. The results indicated that the Mooney–Rivlin model predicts an unstable behavior in the balance biaxial deformation of the extensor apparatus, while the...