Sharif Digital Repository

The steam reforming of ethylene glycol, a simple model compound for biomass-derived liquids, is considered to be an environmentally green process for producing renewable hydrogen. Both Pt and Ni species are known for their catalytic activity under steam reforming reaction conditions. In this investigation, alumina supported Ni-Pt bimetallic catalysts (X wt% Ni-Y wt% Pt/Al2O3 named XNi-YPt) were employed for steam reforming of ethylene glycol. The prepared catalysts were characterized by XRD, BET, H2-TPR, H₂-Chemisorption, and TEM. It was observed that Ni/Pt ratio strongly affected the redox behavior, BET surface area, and particle size of the samples that in turn affected their catalytic... 

This paper proposes using sodium-cooled fast reactor technologies for use in hydrogen vapor methane (SMR) modification. Using three independent energy rings in the Russian BN-600 fast reactor, steam is generated in one of the steam-generating cycles with a pressure of 13.1 MPa and a temperature of 505 °C. The reactor's second energy cycles can increase the gas-steam mixture's temperature to the required amount for efficient correction. The 620 ton/hr 540 °C steam generated in this cycle is sufficient to supply a high-temperature synthesis current source (700 °C), which raises the steam-gas mixture's temperature in the reactor. The proposed technology provides a high rate of hydrogen... 

In this research, a series of NiO–MgO–SiO2 catalyst samples with various nickel contents (5, 10, 15 and 20 wt %) were prepared by a co-precipitation method followed by a hydrothermal treatment and employed in propane steam reforming. The analyses revealed that the enhancement of the nickel content up to 15 wt % improved the propane conversion to 98.6% at 550 °C. Nonetheless, further increase in the nickel loading reduced the catalyst activity due to the formation of larger and more poorly dispersed active sites. Besides, 15 wt % nickel loading led to the high resistance against coke deposition with no detectable carbon on the catalyst surface. In addition, it was revealed that, the decrease... 

The present study aims to analyze a combined heat and power (CHP) system with an approach towards exergy analysis and employing biomass gasification. The cycle modeling was carried out using Cycle-Tempo and the main purpose was to achieve parametric analysis of the model. The systems function was studied by categorizing alternative biomass fuels, also qualitative and quantitative analyses of the biomass fuel samples were presented and considering the trade-off points, most appropriate biomass fuel with respect to exergy efficiency and delivered power were determined. The results indicated that the bagasse and wood chips had the total exergy efficiency of 54.5 and 57.1% in trade-off point,... 

In this research, a series of NiO-xMgO-SiO2 catalysts with various MgO/SiO2 molar ratios were prepared via precipitation method followed by a hydrothermal treatment in the presence of PVP as surfactant. The synergic effect between MgO and SiO2 leading to the various characteristic and catalytic performance during propane steam reforming was investigated in detail. The results showed that 15 wt% NiO-0.5MgO–SiO2 catalyst possessed the highest catalytic activity (68.9% conversion for C3H8 at 550 °C) with a negligible amount of carbon formation after 20 h of reaction duration. This superior catalytic performance can be attributed to the enhanced basicity strength along with strong metal-support... 

A compartment model was developed to describe the flow pattern of gas within the dense zone of a tapered membrane-assisted fluidized-bed reactor (TMAFBR), in the bubbling mode of operation for steam reforming of methane under wall heat flux. The parameters of the developed model (i.e., number of compartments for the bubble and emulsion phases) were determined using the experimental data reported elsewhere [Adris AM, Lim CJ, Grace JR. The fluidized bed membrane reactor system: a pilot scale experimental study. Chem Eng Sci 1994; 49:5833-43.] and good agreements were obtained between model predictions and corresponding experimental data. The developed model was then utilized to predict the... 

For the production of synthesis gas utilised in Midrex direct reduction plants, catalytic steam/CO2 hydrocarbon reforming in tubular reformer is the major process. Owing to the high heat input through the Midrex reformer tube wall, the endothermic nature of reforming reactions, low mass velocity of feed gas and large tube diameter, the catalyst bed is exposed to considerable axial and radial temperature gradients. These radial concentration and temperature gradients may create local areas with potential for carbon formation. To investigate this phenomenon, a rigorous two-dimensional model is developed for simulating the operation of a Midrex reformer which applies a dual catalyst loading... 

The paper presents a comparison of steam methane reforming (SMR), sorption enhanced steam methane reforming (SE-SMR), auto-thermal reforming (ATR), and sorption enhanced auto-thermal reforming (SE-ATR) in a fixed bed reformer for hydrogen production. A one-dimensional, unsteady-state heterogeneous reactor model for each process which includes mass and thermal dispersion in the direction of flow and axial pressure distribution, has been simulated using gPROMS® 4.0.1 model builder, while CEA and Aspen Plus® have been employed to analyze the equilibrium performance and simulate the process flowsheets of individual process respectively. The performance of the individual hydrogen production... 

Auto-thermal reforming (ATR), a combination of exothermic partial oxidation and endothermic steam reforming of methane, is an important process to produce syngas for petrochemical industries. In a commercial ATR unit, tubular fixed bed reactors are typically used. Pressure drop across the tube, high manufacturing costs, and low production capacity are some disadvantages of these reactors. The main propose of this study is to offer an optimized radial flow, spherical packed bed reactor as a promising alternative for overcoming the drawbacks of conventional tubular reactors. In the current research, a one dimensional pseudo-homogeneous model based on mass, energy, and momentum balances is... 

Supportless Ni-Pd-0.1CNT foamy nanocatalyst with specific surface area of 611.3 m2/g was produced by electroless deposition of nickel, palladium and multiwall carbon nanotube (MWCNT) on interim polyurethane substrate. Application of temperature programmed reduction (TPR) and temperature programmed oxidation (TPO) data into Kissinger (Redhead) kinetic model showed lessening of their activation energies due to Pd and CNT addition. Presence of foamy Ni/SiC caused 8% higher steam reforming of methane; while Ni-Pd-0.1CNT presence resulted in 22% higher methane conversion. The catalytic behavior of the samples was described by morphological and compositional studies which were carried out by... 

In this research, the propane steam reforming (PSR) as a promising alternative route over a mesoporous NiO–MgO–SiO2 catalyst to produce syngas (SG) was undertaken. This catalyst was prepared using a co-precipitation method followed by hydrothermal treatment. The influence of such catalyst preparation factors as the hydrothermal time and temperature, pH and calcination temperature on the physicochemical characteristics of the prepared samples were examined. Next, these materials were characterized through the BET-BJH, XRD, TPR, and FTIR analyses. The thermal stability of this catalyst was tested through the TGA and DTA techniques. Furthermore, the deactivation of the calcined catalysts at... 

In this paper, a comparative techno-economic evaluation of hydrogen production by glycerol reforming in aqueous and gaseous phases are presented. To accomplish the techno-economic evaluation, firstly the process modeling and design are presented. Based on the equipment purchased costs, with 80 kg/h hydrogen production, the total cost of hydrogen production is estimated 3.65 and 3.55 $/kgH2 for steam reforming and aqueous phase reforming plants, respectively. Regarding the installation factor in the equipment costs, the total cost of hydrogen production is estimated 7.49 and 7.45 $/kgH2 for steam reforming and aqueous phase reforming plants, respectively. To investigate the impact of... 

In this study, 15 wt. % NiO-MgO-SiO2 catalysts modified by La2O3 promoter were prepared through a co-precipitation route and employed for syngas production via propane steam reforming. Various techniques including X-Ray diffraction, BET, TPR, CO2-TPD, CO-chemisorption, TPO, and Scanning electron microscopy were utilized to characterize the final samples. The results indicated that the incorporation of La2O3 enhanced the metal-support interaction providing less reducible Ni species. In comparison with the La-free catalyst, the promoted ones possessed higher metal dispersion and smaller Ni particles. Nonetheless, excessive amounts of La covering the active sites negatively decreased the Ni... 

Currently, ammonia, as a clean and sustainable energy carrier, is intensively synthesized from its elements during the Haber-Bosch technology. This process requires a large amount of energy and emits numerous amounts of carbon dioxide, because hydrogen is dominantly produced from fossil fuels through reforming processes. Biomass-derived glycerol steam reforming is an attractive alternative to traditional reforming for reducing the dependence on hydrocarbon resources and mitigating climate change. This research aims to intensify a heat-integrated process for the co-production of ammonia and syngas from glycerol valorization. In this process, glycerol reforming continuously provides hydrogen... 

Hydrogen and syngas, as two effective clean fuels, have a considerable stake in the global fuel market. These are dominantly produced from fossil fuels through reforming processes, which lose a large amount of energy and emit numerous amounts of CO2. Bio-renewable glycerol steam reforming is an attractive alternative to traditional reforming for reducing the dependence on hydrocarbon resources and mitigating climate change. This research aims to manage a heat-integrated reactor with three concentric cylinders, containing exothermic-side (methane tri-reforming), endothermic-side (glycerol steam reforming), and permeation-side for co-production of pure hydrogen and syngas. In this process,... 

Potent carbon-neutral energy carriers bring a vital solution for sustained industrialization and environmental protection. Hydrogen as a novel zero-emission energy carrier offers more than twice energy per unit mass compared to other fuels. Membrane reactor technology transforms gray hydrogen to blue by selective hydrogen separation and carbon dioxide capture from the product mixture. Moreover, improved reactant conversion during reversible steam reforming of methane, methanol, and ethanol; water gas-shift; and dehydrogenation of cyclic and aliphatic hydrocarbons as well as enhanced hydrogen yield are results of selective and distributed hydrogen separation from membrane reactor. In this... 

Methane steam reforming (MSR) is an assuring reaction using steam to produce H2 as clean energy over a nicκel-based catalyst. We synthesized mesoporous monometallic NiMgAl2O4 and bimetallic NiCoMgAl2O4 catalysts in a two-step combustion method using a mix of fuels and powder metallurgy. BET-BJH, XRD, TGA, TPR, FESEM, and EDX-mapping characterized surface area, porosity, morphology, crystalline structure, and metal-support interaction behavior. The products exhibited strong interaction of well-structured MgAl2O4 spinel with NiO, in both specimens. The MSR evaluation tests at 750 °C under atmospheric pressure, CH4:H2O feed ratio of 1:1.2 showed the bimetallic catalyst has the highest... 

Catalytic reduction of nitrobenzene is the leading technological step in aniline production. The hydrogen required for this stage, is dominantly produced from fossil fuels through reforming processes, which take much energy and emit large amounts of CO2. Biomass-derived glycerol steam reforming is an attractive alternative to traditional reforming to reduce the dependence on hydrocarbon resources and mitigate climate change. This research aims to analyze a mass- and heat-integrated multi-tubular membrane reactor, containing nitrobenzene hydrogenation (exothermic-side) and glycerol steam reforming (endothermic-side) for co-production of aniline and syngas. In this process, hydrogenation...