Sharif Digital Repository

The present study examined the sorption capacity and sorption kinetics of four-type perlite for oil spills clean up. These four types are different on their porous space, expansion ability and special surface area. The tests were done both in static and dynamic methods. Experiments showed that the perlite spread on oil spill rapidly and floated on the surface of oil spill because of its low density (80-180 kg/m3). Scanning Electron Micrograph (SEM) of a typical structure of expanded perlite showed that it of high porous space. Sorption kinetic of oil spill into porous expanded perlite was evaluated by weight increase of crude oil with sorption time. According to kinetic study sorption of oil... 

During the past decades, a significant increase occurred in accidental oil spill in the aquatic environments. In this regard, oil spill in Marine freshwater is still considered as a major environmental hazard. In this research, the experimental data on the sorption capacity of expanded perlite to crude oil were correlated with the equilibrium isotherm of Langmuir, Freudlich, Tempkin and the three parameter Redlich-Peterson isotherms. The results obtained from each specified isotherms were compared and accuracy of the models were favorably discussed. Accuracy of each model using the error function were evaluated. Moreover, the effect of type of objective function on the final results was... 

Sorption capacity as well as sorption kinetics of oil onto four different expanded perlites with different physical and surface properties were studied. In order to meticulously measure the amount of oil to be sorbed onto the adsorbents used in this study both static and dynamic methods were employed. It would be worth noting that the adsorbent, i.e., perlite can spread on the oil and float on the surface thanks to its low density. The variation of the amount of oil sorbed onto the adsorbents with time was recorded and the weight of adsorbent was monitored at each specified time. The experimental results showed that grain sizes with high surface area can sorb oil to be spread on water... 

The aim of this research work is to investigate sorption characteristic of acid treated brown algae Sargassum bevanom (acid treated S. bevanom) for the removal of Cr(VI) ions from aqueous solutions. The acid-treated alga was prepared by transferring the S. bevanom into 0.5. M HCl and then stirring the mixture at 300. rpm for 6. h at room temperature. The sorption of Cr(VI) ions by batch method is carried out. The optimum conditions of biosorption were found to be: a biomass dose of 0.7. g in 100. ml of Cr(VI), contact time of 110. min and pH 3, respectively. In optimum condition, removal efficiency was 89.64%. It was found that temperature has a positive effect on the removal efficiency.... 

This work describes a novel Fe3O4@SiO2@polypyrrole magnetic nanocomposite and its application in the preconcentration of Cd(ii) and Ni(ii) ions. The parameters affecting the preconcentration procedure were optimised by a Box-Behnken design using response surface methodology. Three variables (extraction time, magnetic sorbent amount, and pH) were selected as the main factors affecting the sorption step, while four variables (type, volume and concentration of the eluent, and elution time) were selected as the main factors in the optimisation study of the elution step. Following the sorption and elution of analytes, the ions were quantified by FAAS. The limits of detection were 0.3 and 1.2 ng... 

Removal of fluoride ions was investigated using a new adsorbent of yttrium alginate biocomposite (YALG). Effect of various parameters such as pH, contact time, initial concentration of fluoride ions and temperature on the sorption capacity of adsorbent was studied. Performing a mathematical assessment of fluoride sorption, isotherm and kinetics models including Freundlich & Langmuir isotherms and pseudo first & second order kinetics were applied on experimental equilibrium results through this work. Isotherm analysis revealed that Langmuir model showed a better evaluation from sorption equilibrium data than Freundlich. Based on kinetics evaluation, the pseudo second-order equation was... 

In this paper, uranium sorption onto amberlite CG-400 anion exchange resin in the presence of phosphate anions was studied. The effect of contact time between the sorbent and aqueous solution, pH, initial concentration of uranium and temperature were also investigated. Kinetic studies show that uranium sorption onto amberlite CG-400 resin in the presence of phosphate is a fast process and follows pesudo-second-order kinetics. It was also found that the pH value and the presence of phosphate play very important roles in the uranium sorption onto CG-400 resin. Optimum pH for uranium sorption in the presence of phosphate anions was about 3.5. The experimental sorption isotherm is successfully... 

The UiO-66 NH2 and ZIF-8 metal organic framework nanoparticles (NMOFs) were incorporated into the polyvinylidene fluoride (PVDF) nanofibrous membrane. Then, the chitosan nanofibers were coated on the PVDF nanofibers to produce the PVDF/chitosan nanofibers. The performance of synthesized PVDF/NMOFs single layer and PVDF/chitosan/NMOFs two layers nanofibrous membranes was investigated for BSA protein molecules and Cr(VI) ions separation via ultrafiltration membrane process. The potential of synthesized nanofibers was also examined for BSA and Cr(VI) adsorption in a batch system. The characteristics of synthesized nanofibrous membranes were determined using SEM, EDX, TGA, BET, porosity and...