Sharif Digital Repository

Information integrity in cache memories is a fundamental requirement for dependable computing. As caches comprise much of a CPU chip area and transistor counts, they are reasonable targets for single and multiple transient faults. This paper presents: 1) a fault detection scheme for tag arrays of cache memories and 2) an architectural cache to improve dependability as well as performance. In this architecture, cache space is divided into sets of different sizes and different tag lengths. The error detection scheme and the cache architecture have been evaluated using a trace driven simulation with soft error injection and SPEC 2000 applications. The results show that error detection... 

The modified couple stress theory is employed in this paper in order to formulate the size-dependent strain energy release rate of Euler-Bernoulli and Timoshenko notched beams. As a case study, the normalized energy release rate of the aforementioned beams has been developed for three-point bending as a function of the ratio of material length scale parameter to the beam depth. The results of the current model are compared to the experimental data. The good agreement between the present results and the experimental values indicates that the current model can be successfully applied to evaluate size dependent energy release rate of structures  

The experimental observations indicate that the mechanical behavior of micro and nano scale structures is size-dependent. In this study, employing the modified couple stress theory the size-dependent strain energy release rate of notched Euler-Bernoulli beams made of functionally graded material (FGM) is formulated. The normalized energy release rate for the problem of three-point bending in notched FG beams is obtained using the procedure established by Kienzler and Herrmann [Kienzler R, Herrmann G, An elementary theory of defective beams. Acta Mech 1986; 62:37-46]. It is assumed that the material properties vary continuously along the beam thickness according to a power law distribution.... 

The governing equations of coupled thermoelasticity of Timoshenko micro-beams are developed based on the generalized thermoelastic theory and non-Fourier heat conduction model. Such problems may arise in MEMS such as micro-pumps as well as micro-sensors. The present model is on the basis of non-classical continuum theory and non-Fourier heat conduction model which has capability of capturing the size-effect in micro-scaled structures. Governing equations and both classical and non-classical boundary conditions of motion are obtained using the variational approach. As the case study, the present model is utilized for the simply supported micro-beams subjected to a constant impulsive force per... 

In this paper, static behavior and pull-in of micro tweezers is studied. The micro tweezer is modelled as two cantilever beams. Static behavior of the micro tweezer under the effect of electrostatic actuation is modelled using the Euler-Bernoulli beam theory. In order to capture size effects on the behavior of micro tweezers, modified couple stress theory is utilized. It is shown when the voltage between two electrodes increased from some specific value, micro beams adhere to each other and it is observed that the pull-in voltage predicted by the modified couple stress theory considerably differs with that of the classical theory of elasticity. Results of this paper can be used for accurate... 

In this paper, the strain gradient theory, a non-classical continuum theory able to capture the size effect happening in micro-scale structures, is employed in order to investigate the size-dependent nonlinear forced vibration of Euler-Bernoulli microbeams. The nonlinearities are caused by mid-plane stretching and nonlinear external forces such as van-der-Waals force. The nonlinear governing equations of the microbeams are solved analytically utilizing the perturbation techniques. The primary, super-harmonic and sub-harmonic resonances of a microbeam are studied and the size-dependency of the frequency responses is assessed. The results indicate that the nonlinear forced vibration behavior... 

In this paper, a size-dependent non-classical yield criterion is introduced on the basis of the modified couple stress theory in order to capture the size-dependency of the micro-scale structure yielding loads where the attempts of the classical yield criteria such as the von-Mises have been in vain. In order to develop the new yield criterion, the deviatoric part of the micro-scale structure strain energy density, including both classical and non-classical parts, is equated to the deviatoric strain energy density of a macro-size tensile-test sample at the yielding point. For bending of microbeams and torsion of microbars, the size-dependent yielding moments have been determined based on the... 

Wettability alteration of rock surfaces toward gas wetting have been recognized as a practical approach for maximizing the production from the gas condensate reservoirs. Most of the reported work in this area applied the so called sessile drop contact angle measurement technique to examine the change in wetting state of a surface. However, the size-dependent wetting behavior of drop which could affect the exact determination of wettability and wettability changes was not well discussed in the previous studies. Therefore, in this work, the size dependency of contact angle for four different liquid-solid-gas systems; i.e., water-calcite-air, water-treated calcite-air (nanofluid treated... 

Dynamic contact angle measurement; as a standard method for surface wettability analysis, is usually conducted through the analysis of sessile drops formed following the low rate injection of fluid from beneath through a drilled hole via an injection needle. However, understanding/characterizing the changes of drop contact angle from the point where the flat solid surface begins is not well discussed yet. Moreover, during the evaluation of size-dependent behavior of contact angle of millimeter-scale drops, the effect of the drilled hole is ignored. In this regard, in the current study, the experimental and thermodynamic characterizations of the sessile drop advancing contact angle... 

The classical yield criteria do not describe the yield size-dependency that has been observed in micro-scale structures (Fleck, Muller, Ashby, & Hutchinson, 1994; Stolken and Evans 1998; Moreau et al. 2005), and may also significantly underestimate the yield loads of structures at micron and sub-micron scales (Son, Jeong, & Kwon, 2003; Liu et al., 2013). The present paper suggests a specific size-dependent yield criterion based on the strain gradient theory that is aimed at addressing this inadequacy. In order to develop the strain gradient based yield criterion, the deviatoric part of the strain energy is calculated based on this theory and equated to the deviatoric strain energy of a... 

In this paper, the strain gradient theory, a non-classical continuum theory able to capture the size effect happening in micro-scale structures, is employed in order to investigate the size-dependent nonlinear forced vibration of Euler-Bernoulli microbeams. The nonlinearities are caused by mid-plane stretching and nonlinear external forces such as van-der-Waals force. The nonlinear governing equations of the microbeams are solved analytically utilizing the perturbation techniques. The primary, super-harmonic and sub-harmonic resonances of a microbeam are studied and the size-dependency of the frequency responses is assessed. The results indicate that the nonlinear forced vibration behavior... 

This study investigates influence of fringing field effect on the voltage dependent behavior of electrostatically actuated micro-beams. For this purpose, the size dependent beam model is used. Strain gradient formulation is utilized to consider size effects. The effect of fringing field effect on the beam's behavior is investigated and it is shown that lack of considering the fringing field effect in the formulation of the problem may lead to considerable error in predicting the size dependent micro-beams behavior under the effect of electrostatic actuation. The results of this research can be used for safe and stable design of electrostatically actuated micro-beams  

This paper investigates the dynamic behavior of microcantilevers under suddenly applied DC voltage based on the modified couple stress theory. The cantilever is modeled based on the Euler-Bernoulli beam theory and equation of motion is derived using Hamilton's principle. Both analytical and numerical methods are utilized to predict the dynamic behavior of the microbeam. Multiple scales method is used for analytical analysis and the numerical approach is based on a hybrid finite element/finite difference method. The results of the modified couple stress theory are compared with those from the literature as well as the results predicted by the classical theory. It is shown that the modified... 

This paper investigates the deflection and static pull-in of microbridges based on the modified couple stress theory, a non-classic continuum theory able to predict the size effects for structures in micron and sub-micron scales. The beam is modeled using EulerBernoulli beam theory and the nonlinearities caused by mid-plane stretching have been considered. It is shown that modified couple stress theory predicts size dependent normalized deflection and pull-in voltage for microbeams while according to classical theory the normalized behavior of microbeams is independent of the size of the beam. According to results, when the thickness of the beam is in order of length scale of the beam... 

This paper studies stress distribution in a single-walled carbon nanotube (SWCNT) under internal pressure with various chirality. Strain gradient theory is used to capture the size-dependent behavior of the SWCNT. Minimum total potential energy principle is successfully applied to derive the governing differential equation and its associated boundary conditions. Due to complexity of the governing differential equation and boundary conditions, numerical scheme is used to solve the problem. Comparing the results based on strain gradient theory and that of classical elasticity shows a major difference between these two methods. However, a close examination of the results indicates that both... 

In this paper, size-dependent vibration analysis of axially functionally graded (AFG) supported nanotubes conveying nanoflow under longitudinal magnetic fields are performed, aiming at performance improvement of fluid-interaction nanosystems. Either the density or the elastic modulus of the AFG nanotube varies linearly or exponentially along the axial direction. Based on the nonlocal continuum theory, the higher-order dynamical equation of motion of the system is derived considering no-slip boundary condition. Galerkin discretization technique and eigenvalue analysis are implemented to solve the modeled equation. The validity of the simplified model is justified by comparing the results with... 

In this paper, size-dependent vibration analysis of axially functionally graded (AFG) supported nanotubes conveying nanoflow under longitudinal magnetic fields are performed, aiming at performance improvement of fluid-interaction nanosystems. Either the density or the elastic modulus of the AFG nanotube varies linearly or exponentially along the axial direction. Based on the nonlocal continuum theory, the higher-order dynamical equation of motion of the system is derived considering no-slip boundary condition. Galerkin discretization technique and eigenvalue analysis are implemented to solve the modeled equation. The validity of the simplified model is justified by comparing the results with... 

Since the classical continuum theory is neither able to evaluate the accurate stiffness nor able to justify the size-dependency of micro-scale structures, the non-classical continuum theories such as the modified couple stress theory have been developed. In this paper, a new comprehensive Timoshenko beam element has been developed on the basis of the modified couple stress theory. The shape functions of the new element are derived by solving the governing equations of modified couple stress Timoshenko beams. Subsequently, the mass and stiffness matrices are developed using energy approach and Hamilton's principle. The formulations of the modified couple stress Euler-Bernoulli beam element... 

One of the most popular constitutive rules that correlate the continuum and atomic properties in multi-scale models is the Cauchy-Born (CB) hypothesis. Based on this constitutive law of continuum media, it assumes that all atoms follow the deformation subjected to the boundary of crystal. In this paper, the validity and failure of CB hypothesis are investigated for the silicon nano-structure by comparison of the continuum and atomic properties. In the atomistic level, the stresses and position of atoms are calculated using the molecular dynamics (MD) simulation based on the Tersoff inter-atomic potential. The stresses and strains are compared between the atomistic and continuous media to... 

In this paper, the modified couple stress theory is employed to develop a size-dependent beam element able to predict the size-dependency observed in microbeams. The stiffness matrix is obtained for the aforementioned beam element. As an example, the deflection of a microcantilever is evaluated using the proposed beam elements and the results of the finite element method are compared to the analytical results obtained by the classical beam theory. The maximum deflection of the beam is depicted versus the ratio of the beam thickness to the material length scale parameter, the parameter appearing in non-classical continuum theories. The results show that when the characteristic size of the...