Sharif Digital Repository

A three-dimensional finite element (FE) model for armchair, zigzag and chiral single-walled carbon nanotubes (SWCNTs) is proposed. By considering the covalent bonds as connecting elements between carbon atoms, a nanotube is simulated as a space frame-like structure. Here, the carbon atoms act as joints of the connecting elements. To create the FE models, nodes are placed at the locations of carbon atoms and the bonds between them are modeled using three-dimensional elastic beam elements. Using Morse atomic potential, the elastic moduli of beam elements are obtained via considering a linkage between molecular and continuum mechanics. Also, a new wall thickness (bond diameter) equal to 0.1296... 

The nonequilibrium molecular dynamics (NEMD) simulations are performed to calculation the cross drag over a nanotube located in a uniform liquid argon flow. As is known, the behavior of fluid flows in nano-scale sizes is very different from that in microscopic and macroscopic sizes. In this work, our concern is on the flow of argon molecules over a nanotube which occurs in nanoscale sizes. We calculate the cross drag enforced the nanotube at Re<10. In this regard, we use the molecular dynamics and simulate the flow of argon molecules over (6,0), (8,0) and (10,0) nanotubes. The simulations are performed at different velocities and the cross drag coefficient is computed at different Reynolds... 

A single-walled nanotube structure embedded in an elastic matrix is simulated by the nonlocal EulerBernoulli, Timoshenko, and higher order beams. The beams are assumed to be elastically supported and attached to continuous lateral and rotational springs to take into account the effects of the surrounding matrix. The discrete equations of motion associated with free transverse vibration of each model are established in the context of the nonlocal continuum mechanics of Eringen using Hamilton's principle and an efficient meshless method. The effects of slenderness ratio of the nanotube, small scale effect parameter, initial axial force and the stiffness of the surrounding matrix on the natural... 

This review is mostly focused on the recently emerged methodologies for preparing the appropriate extracting media with enhanced capacity, stability and selectivity, which could be used in capillary microextraction (CME). We particularly consider conductive polymers, sol-gel-based materials, monolithic coatings, molecularly-imprinted polymers and xerogels. Moreover, we discuss recent advances in configuration of CME, array capillaries and unbreakable substrates  

Solid-phase microextraction (SPME) is a fast, solvent-free technique, which, since its introduction in the 1990s, has been increasingly applied to sample preparation in analytical chemistry. Conventional SPME fibers are fabricated by making a physical bond between the usual silica substrate and the polymeric coatings. However, some applications are limited, as the lifetime and the stability of conventional SPME fibers cannot meet the demands of analyzing relatively non-volatile compounds with more polar moieties. There have been attempts to analyze less volatile compounds by increasing the thermal, physical and chemical stability of the fibers. In this review, we present some new... 

Magnetic carbon nanotubes (MCNTs) have been widely studied for their potential applications in medicine, diagnosis, cell biology, analytical chemistry, and environmental technology. Introduction of MCNTs paved the way for the emergence of new approaches in nanobiotechnology and biomedicine as a result of their multifarious properties embedded within either the carbon nanotubes (CNTs) or magnetic parts. Numerous preparation techniques exists for functionalizing CNTs with magnetic nanoparticles, and these versatile strategies lay the ground for the generation of novel and versatile systems which are applicable to many industries and biological areas. Here, we review and discuss the recent... 

The potential of electrospun cellulose acetate/chitosan/single walled carbon nanotubes/ferrite/titanium dioxide (CA/chitosan/SWCNT/Fe3O4/TiO2) nanofibers was investigated for the removal of Cr(VI), As(V), Methylene blue and Congo red from aqueous solutions via the adsorption and photocatalytic reduction processes. The properties of synthesized SWCNT/Fe3O4/TiO2 and fibers were characterized using TEM, SEM, FTIR, XRD, TGA and BET analysis. In adsorption process, the influence of adsorbent type including SWCNT to Fe3O4 ratio, TiO2 to SWCNT/Fe3O4 ratio and SWCNT/Fe3O4/TiO2 concentration as well as the adsorption parameters including pH, contact time, and initial concentration of adsorbates on... 

Since that pathogenic bacteria are major threats to human health, this paper describes the fabrication of an effective and durable sensing platform based on gold nanoparticles/carbon nanoparticles/cellulose nanofibers nanocomposite (AuNPs/CNPs/CNFs) at the surface of glassy carbon electrode for sensitive and selective detection of Staphylococcus aureus (S. aureus). The AuNPs/CNPs/CNFs nanocomposite with the high surface area, excellent conductivity, and good biocompatibility was used for self-assembled of the thiolated specific S. aureus aptamer as a sensing element. The surface morphology of AuNPs/CNPs/CNFs nanocomposite was characterized with field emission scanning electron microscopy... 

With the passage of time and more advanced societies, there is a greater emergence and incidence of disease and necessity for improved treatments. In this respect, nowadays, aptamers, with their better efficiency at diagnosing and treating diseases than antibodies, are at the center of attention. Here, in this review, we first investigate aptamer function in various fields (such as the detection and remedy of pathogens, modification of nanoparticles, antibiotic delivery and gene delivery). Then, we present aptamer-conjugated nanocomplexes as the main and efficient factor in gene delivery. Finally, we focus on the targeted co-delivery of genes and drugs by nanocomplexes, as a new exciting...