Sharif Digital Repository

The performance of an axisymmetric supersonic mixed-compression air intake has been investigated experimentally. The intake has been designed for free stream Mach number of 2.0. This study has two main goals, firstly to investigate the performance of the intake without boundary-layer bleed in design and off-design conditions and secondly to study the effects of a slot bleed on the intake performance. The intake has been tested at free stream Mach numbers of 1.8, 2.0, and 2.2 and zero degree angle of attack. Total pressure recovery (TPR), mass flow ratio (MFR) and flow distortion (FD) have been selected parameters to assess the intake performance. The bleed slot is located upstream of the... 

Today, MEMS have wide applications in modern technologies. Magneto hydro dynamic (MHD) micropumps play an important role in the MEMS industry and have been thoroughly studied in the recent years. In this study, the idea of classic reciprocating micropumps was combined with magneto hydro dynamics (MHD) to develop a novel Magneto Mercury Reciprocating (MMR) micropump. To attain this goal, the Lorentz force, as the actuation mechanism, was used to move a conductive liquid (mercury) slug in a reciprocating manner in order to suck the working fluid (air) from the inlet and pump it to the outlet. The performance of the fabricated MMR micropump was examined in terms of parameters such as pressure... 

Because of its unique properties, graphene has attracted the attentions of many academic research groups and recently, the industry. One of the promising applications of the graphene is in micro/nano-sensors, e.g. using it as a pressure sensor. To use it in mechanical-based nano-sensors, it is very important to investigate the mechanical behavior of the nano-sized graphene sheet and its sensitivity to the medium changes applied on its faces. In this work, we use the molecular dynamics MD method and simulate the behavior of graphene sheet under differential water pressure influences. In this regard, a square straight monolayer graphene sheet is placed as a separator diaphragm between two... 

In this study, droplet generation in a T-junction fluidic channel device was studied by using electrowetting actuation with the consideration of different droplet forming regimes. For this purpose, the finite element method (FEM) was used to solve the unsteady Naiver-Stokes equation. In addition, the level set method was applied to capture the interface between two phases. It was shown that there was a good agreement between obtained data and other work during the process of droplet generation in the absence of electrowetting actuation which results in the decrease in the size of the droplet with increasing the velocity ratios. In the shearing regime, the effectiveness of electrowetting on... 

In high Knudsen number flow regimes microgas flow analysis may not be performed accurately using the classical CFD methods. Alternatively, the gas flow through micro-geometries can be investigated reliably using the direct simulation Monte Carlo (DSMC) method. Our concern in this paper is to use DSMC to study the mixing of two gases in entering simultaneously into a microchannel. The mixing process is assumed to be complete when the mass composition of each species deviates by no more than ±1% from its equilibrium composition. To enhance the mixing process, we focus on the effects of inlet-outlet pressure difference and the pressure ratios of the two incoming CO and N2 streams on the mixing... 

A novel rotary magnetohydrodynamic (MHD) (RMHD) micropump is presented in this paper in order to both benefit exclusive advantages from the MHD micropumps and eliminate the current obstacles in their implementation. Lorentz force, which is the actuation mechanism in RMHD, is used to propel a mercury slug in a circular microchannel in order to suck the working fluid from the inlet and pump it to the outlet. This idea is integrated with a valve which prevents the working fluid from passing through, while allowing the mercury slug to pass, during each pumping loop. The performance of a fabricated RMHD is evaluated, considering parameters such as pressure difference, running duration, electric... 

In this research, a triethylene glycol (TEG)/nano-zeolite Na-Y liquid membrane was developed in order to investigate the effect of zeolite nanoparticles on separation performance of a liquid membrane. To do this, a high yield nano-zeolite Na-Y was synthesized using mid-synthesis addition method. The synthesized samples were characterized by XRD, FT-IR, and SEM (EDX) instrumental techniques. A supported liquid membrane was prepared by impregnating a porous hydrophilic PVDF support with TEG and nano-zeolite Na-Y. The permeation tests of single gas components of O2, N2 and CO2 were carried out at pressure differences of 0.8 and 1.8 bar. The permeances of the single gases were found to be: CO2 >... 

The Poiseuille flow through slit-like nanochannels is investigated using the nonequilibrium molecular dynamics simulations. To drive a dense flow through the channel, we use two self-adjusting vertical plates strategy. These plates force the liquid to flow through the nanochannel under adjustable inlet and outlet boundary conditions. Comparing with the dual-control-volume grand-canonical molecular dynamics method, the current strategy provides many advantages. The current strategy does not need particle insertion and deletion, therefore, the system dynamics would not be affected at all. Moreover, the number of particles in the simulation system is fixed due to inserting the two... 

Scale precipitation due to the mixing of incompatible injected water with formation brine and its subsequent deposition in porous media is an unpleasant phenomenon in water injection projects that can lead to severe injectivity and productivity decline. As a result of the complexity of geochemical reactions, modelling scale precipitation and deposition is a challenge. This paper presents a coupled geochemical and fluid flow model to simulate reactive flow in porous media which models pressure difference increase resulting from scale formation during water injection into porous media. To simulate chemical reactions during scale formation and subsequent rock permeability decline, PHREEQC... 

Due to the simple structure and low production cost of Joule-Thomson (JT) refrigeration cycles, these cryogenic systems have widely been used in many food or medicine industries. However, in many scenarios, two or even three cryogenic temperatures are needed to simultaneously supply different cryogenic cooling loads since each product has its own comfort low-temperature range. In this case, multi-evaporator JT systems can be a promising solution to address several cryogenic temperatures via employing different evaporators. Following this objective, an innovative triple-evaporator JT cycle is proposed, where the pressure difference between evaporators is created via a pumping mechanism by... 

This work studies the natural frequencies and modes of liquid sloshing in a rectangular 3D tank with the slotted baffles in middle. A new vibrational model incorporating the pressure difference between the two sides of the baffle, using a transmission function in Laplace space is presented. To this end, a part of the baffle that includes the wall and the slot is modeled in Fluent software, to express this pressure difference as a function of the fluid velocity passing through the baffle. Then, using the boundary element method, and boundary conditions, the equations of the fluid domain are developed. In this research, the rigid baffle is surrounded by a three-dimensional irrotational... 

A high silica CHA-type membrane was synthesized by the in-situ crystallization method on a disk like α-alumina porous support to separate both acid (H2S, CO2) gases from methane. The membrane showed a permeance of 3.39×10-8mol/m2sPa for pure CO2with CO2/CH4 ideal selectivity of 21.6 at 303K and 100kPa pressure difference across the membrane. The membrane was also tested with N2 and O2 pure gases indicating a small O2/N2 selectivity of 1.2-1.4, which shows that this type of membrane is not suitable for O2/N2 separation. The membrane performance was also analyzed by binary (CO2-CH4) and ternary (H2S-CO2-CH4) gas mixtures, with compositions near the real sour natural gas (CO2: 2.13mol%, H2S:... 

The objective of this study was to experimentally investigate the performance of water-alternating gas (WAG) injection in one of Iran's oil reservoirs that encountered a severe pressure drop in recent years. Because one of the most appropriate studies to evaluate the reservoir occurs generally on rock cores taken from the reservoir, core samples drilled out of the reservoir's rock matrix were used for alternating injection of water and gas. In the experiments, the fluid system consisted of reservoir dead oil, live oil, Co 2, and synthetic brine; the porous media were a number of carbonate cores chosen from the oilfield from which the oil samples had been taken. All coreflood experiments were... 

It is of interest to explore transfer of fluid through nanopores because of widespread applications for such systems. Carbon Nanotubes (CNTs) with their exceptional properties are the best candidates as building blocks for nanostructures. Water transfer in lots of biological systems acts as an important role for keeping the tissue working properly. Peptide nanotube is one of the best biological channels which was proposed recently. While the mechanism of water permeation through channels is very complex, however, investigations such as effect of charge distributions and temperature on water permeation could shed light on the determinants of water and proton conduction rates in biol ogical...