Sharif Digital Repository

The behavior of a cemented gravely sand is studied using triaxial tests. Undrained tests were performed on saturated specimens, and stress-strain characteristics of the soil, along with volumetric and pore pressure changes, were recognized. Artificially cemented samples are prepared using calcite crystallization as the cementing agent in different percentages. The tests were done in usual range of confining pressures, from 50 to 1200 kPa. The results shows that dilation occurs even at highest confining pressure and least cement content. Also the friction angle of soils increases slightly with cement content, but cohesion intercept increasing is more noticeable  

In this work, the effect of brine salinity on water-in-oil emulsion flow performance in porous media is studied as it imposes a significant challenge to oil production in the petroleum industry. A crude oil sample from an Iranian oilfield and synthetic brine with different salinities (40-140 g/L salt) are used. The results show that the emulsion viscosity and interfacial tension increase slightly with salinity, while they do not considerably affect the flow behavior. The emulsion stability analysis shows that larger w/o emulsion droplets are formed for higher brine salinity, which potentially block more pore spaces through straining and interception mechanisms. This phenomenon resulted in... 

Changes in thermodynamic properties such as pressure, temperature, and composition may result in asphaltene precipitation and deposition in porous media. In addition, asphaltene deposition can cause wettability alteration, permeability reduction, and ultimately a decrease in the productivity of a reservoir. Natural depletion is one of the most common processes of asphaltene deposition in which pressure changes destabilize the dissolved asphaltene in the oil and settle them onto the rock surface. In this work, natural depletion experiments in consolidated core samples were performed under simulated reservoir conditions to obtain reliable data and analyze the asphaltene deposition mechanisms.... 

This work concerns observing the pressure as well as CO2 mole percentage effects on asphaltene molecular weight distributions at reservoir conditions. A high-pressure, high-temperature asphaltene measurement setup was applied, and the amount of precipitated asphaltene at different pressures as well as CO2 mole percentage in an Iranian heavy crude oil was measured. Moreover, the asphaltene molecular weight distributions during titration of crude oil with different n-alkanes were investigated. The gel permeation chromatography (GPC) apparatus was used for characterization of asphaltene molecular weight under different conditions. It has been observed that some thermodynamic changes such as...