Sharif Digital Repository

A NiOx−graphene oxide (NiOx−GO) hybrid has been prepared by a simple solution-processed method and was used as hole-extraction material in perovskite solar cells with either gold or carbon as back contact electrode. The impact of GO content on the optoelectronic behavior of NiOx and the photovoltaic performance of the fabricated devices has been studied. Thus, GO incorporation showed a significant improvement in the performance of NiOx-based devices. The best attained efficiency was 13.3%, and it was 45% higher than that with pure NiOx. This is attributed to a significant improvement in the hole extraction, recombination resistance, and energy-level matching in comparison to pure NiOx. In... 

Functional perovskite solar cells can be made by using a simple, inexpensive and stable soluble tetra-n-butyl-substituted copper phthalocyanine (CuBuPc) as a hole transporter. In the present study, TiO2/reduced graphene oxide (T/RGO) hybrids were synthesized via an in situ solvothermal process and used as electron acceptor/transport mediators in mesoscopic perovskite solar cells based on soluble CuBuPc as a hole transporter and on graphene oxide (GO) as a buffer layer. The impact of the RGO content on the optoelectronic properties of T/RGO hybrids and on the solar cell performance was studied, suggesting improved electron transport characteristics and photovoltaic parameters. An enhanced... 

Identifying and reducing the dominant recombination processes in perovskite solar cells is one of the major challenges for further device optimization. Here, we show that introducing a thin interlayer of poly(4-vinylpyridine) (PVP) between the perovskite film and the hole transport layer reduces nonradiative recombination. Employing such a PVP interlayer, we reach an open-circuit voltage of 1.20 V for the best devices and a stabilized efficiency of 20.7%. The beneficial effect of the PVP interlayer is proven by statistical analysis of various samples, many of those showing an open-circuit voltage larger than 1.17 V, and a 30 mV increase in average compared to unmodified samples. The reduced... 

In this research, we employed transient photo-voltage rise and decay measurements to investigate the origin of slow unsymmetrical rise and decay profiles in single and triple cation perovskite solar cells. Drastic changes in photo-voltage decay profile were observed upon insertion of Br−, Cs+ and FA+ ions into perovskite structures. In order to explain our observations, the activation energy for ionic defects was measured and an equivalent circuit model was proposed containing both electrical and ionic components. The electrical branch consists of a diode, the bulk capacitance and resistances for charge transport and recombination. In parallel we introduced an ionic branch describing the... 

Antisolvent crystallization is known as an effective approach for the deposition of pinhole-free solution-processed perovskite layers for high-performance solar cells. Here, we introduce a modified antisolvent dripping method by adding tetra ethyl orthosilicate (TEOS) into chlorobenzene as a conventional antisolvent. Through TEOS modification, perovskite solar cells show efficiencies as high as 16% with more than 85% retention after 290 h storage at ambient conditions in comparison to 20% in pristine cells. This significant enhancement in efficiency and stability mainly related to the decrement of the density of surface defects, which is confirmed by considerably enhanced photoluminescence... 

A low-cost carbon cloth is applied in perovskite solar cells (PSC) as a collector composite and degradation inhibitor. This study incorporates carbon fibers as a back contact in perovskite solar cells, which results in enhancement in all photovoltaic parameters. This material is suitable for large-scale fabrication of PSCs as it has shown an improved long-term stability when compared to the gold counterpart under elevated temperatures  

Scale-up deposition methods in perovskite solar cell research, are mostly used under humidity environment outside the glove-box. Also, the as-printed absorbing layer before the post-annealing process is always wet. Thus, controlling the morphology and crystallization of perovskite thin-films in up-scaled deposition systems is difficult and strongly investigated by the researchers. In this work, we introduce an anti-solvent-free meniscus printing method in which, the absorbing perovskite film with optimal performance is achieved. To this end, we check the printing parameters to get to the optimized film characteristics. Also, a vacuum chamber (<100 Pa) is used for 30 s to remove the solvent... 

The improvement of the quality of the hole transporting layer (HTL) plays a key role in the fabrication of highly efficient and stable perovskite solar cells (PSCs). Here, we used rubrene as a surface treatment agent on top of a spiro HTL. We found that rubrene can cover the pinholes of the spiro layer and provide an excellent contact layer for planar PSCs. Based on this modification, mobile gold ions from the metal electrode are prevented from diffusing through the HTL hindering the degradation of PSCs. The optimized device shows a maximum power conversion efficiency (PCE) of 19.87% and a 79% fill factor (FF), which are higher than the 17.98% PCE and 72% FF of the reference device. In... 

Here in this research, a modified interface between the electron transport layer (ETL) and the perovskite layer in a perovskite solar cell (PSC) is provided by adding the ammonium chloride (NH4Cl) to the tin oxide (SnO2) as the modified ETL of a planar structure as follows: fluorine-doped tin oxide (FTO)/NH4Cl-SnO2/Mixed cation perovskite/Copper indium disulfide (CIS)/Gold (Au). The effects of NH4Cl on ETL are investigated in different amounts from 0.003 to 0.02 M and the best results were obtained in the amount of 0.013 M. The best NH4Cl-SnO2 ETL could increase the power conversion efficiency (PCE) of fabricated planar PSC by 16.79% with open-circuit voltage (Voc) of 1.15 V and negligible... 

Here in this research, a modified interface between the electron transport layer (ETL) and the perovskite layer in a perovskite solar cell (PSC) is provided by adding the ammonium chloride (NH4Cl) to the tin oxide (SnO2) as the modified ETL of a planar structure as follows: fluorine-doped tin oxide (FTO)/NH4Cl-SnO2/Mixed cation perovskite/Copper indium disulfide (CIS)/Gold (Au). The effects of NH4Cl on ETL are investigated in different amounts from 0.003 to 0.02 M and the best results were obtained in the amount of 0.013 M. The best NH4Cl-SnO2 ETL could increase the power conversion efficiency (PCE) of fabricated planar PSC by 16.79% with open-circuit voltage (Voc) of 1.15 V and negligible... 

Perovskite solar cells have been constructed under the standard procedure by employing soluble tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material. Solution processed device construction was carried out under ambient conditions of 50–60% ambient humidity. Triphenylamine substitution played the double role of imparting solubility to the core metal phthalocyanine as well as to introduce electron-rich ligands, which could enhance the role of Zn phthalocyanine as hole transporter. Indeed, the obtained material was functional. The present data highlight tetratriphenylamine-substituted Zn phthalocyanine as hole transporting material but also highlight the importance of... 

Perovskite solar cells (PSCs) have attracted significant attention due to their excellent efficiency reaching 22.1% in just the past few years. Despite their high efficiency, the limited long-term stability of PSCs has to be overcome. Moisture environments has been recognized as a main degradation pathway of perovskite materials. This review summarizes recent studies about relationship of the stability of PSCs with moisture environment. We also discuss the current standard strategies for enhancing the stability of PSCs by modifying the properties of either the perovskite material itself or its interfaces. © 2018  

Scalable coating methods have recently emerged as practical alternative deposition techniques to the conventional spin-coating despite their lower yielding power conversion efficiencies (PCEs). The most important barrier acting against the use of scalable deposition methods to get a highly absorbing (>95%) film with controlled morphology in the high crystallinity of perovskite particles is the impossibility of antisolvent dripping during the deposition. Here, we demonstrate the positive role of both the surfactant-engineering and the vacuum-annealing (<100 Pa) process in improving the device performance to overcome this limit. A detailed optimization of the vacuum-assisted meniscus printing... 

Perovskite solar cells (PSCs) have attracted significant attention due to their excellent efficiency reaching 22.1% in just the past few years. Despite their high efficiency, the limited long-term stability of PSCs has to be overcome. Moisture environments has been recognized as a main degradation pathway of perovskite materials. This review summarizes recent studies about relationship of the stability of PSCs with moisture environment. We also discuss the current standard strategies for enhancing the stability of PSCs by modifying the properties of either the perovskite material itself or its interfaces  

FAPbI3 perovskites are excellent candidates for fabrication of perovskite solar cells (PSCs) with high efficiency and stability. However, these perovskites exhibit phase instability problem at room temperature. In this work, to address this challenge we use methylammonium chloride (MACl) as an additive and employed a layer-by-layer thermal evaporation technique to fabricate high-quality perovskite films on a large scale of 25 cm2. The optimized perovskite films show high crystallinity with large grains in the μm-range and reveals phase stability due to the presence of MACl after the annealing process. Finally, we achieved PSCs with 17.7% and 15.9% for active areas of 0.1 cm2 and 0.8 cm2,... 

The antisolvent method has been used extensively to induce the growth of high-quality perovskite layers for efficient solar cells. However, uncontrollable nucleation and crystallization increases the risk of formation of undesirable defects. Here, we report a facile way to control the nucleation and crystallization stages in perovskite formation by changing the temperature of chlorobenzene (CB) in the antisolvent method. When CB is injected on the spinning substrate with a precursor solution, CB temperature affects the nucleation process as well as the crystallization process. As the CB temperature increases, nuclei increase in size, leading to the formation of larger perovskite crystals... 

Herein, we show that surface treatment of PEDOT:PSS films using propionic acid (PA) results in better device performance for the resulting CH3NH3PbI3 perovskite solar cells (PCE > 15%). N2 blow spreading of PA appears critical in enhanced performance. This weak acid treatment leads to no worse roughness, while providing larger perovskite grains  

Nickel oxide (NiOx) is a promising hole transport material in inverted organic-inorganic metal halide perovskite solar cells. However, its low intrinsic conductivity hinders its further improvement in device performance. Here, we employ a trimercapto-s-triazine trisodium salt (TTTS) as a chelating agent of Ni2+ in the NiOx layer to improve its conductivity. Due to the electron-deficient triazine ring, the TTTS complexes with Ni2+ in NiOx via a strong Ni2+-N coordination bond and increases the ratio of Ni3+:Ni2+. The increased Ni3+ concentration adjusts the band structure of NiOx, thus enhancing hole density and mobility, eventually improving the intrinsic conductivity of NiOx. As a result,... 

Perovskite solar cells (PSCs) have shown rapid progress in a decade of extensive research and development, aiming now towards commercialization. However, the development of more facile, reliable, and reproducible manufacturing techniques will be essential for industrial production. Many lamination methods have been initially designed for organic photovoltaics (OPVs), which are conceptually similar to PSCs. Lamination could provide a low-cost and adaptable technique for the roll-to-roll production of solar cells. This review presents an overview of lamination methods for the fabrication of PSCs and OPVs. The lamination of different electrodes consisting of various materials such as metal back... 

Perovskite solar cells have been constructed under ambient conditions by using 2,2',7,7'-Tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-OMeTAD) mixed with a small quantity of soluble tetra-n-butyl substituted copper phthalocyanine as hole transporting material. The introduction of the phthalocyanine derivative resulted in an impressive increase of cell efficiency, which changed from 10.4% in the absence to 15.4% in the presence of phthalocyanine. This effect is related to the creation of deep traps in the hole transporting phase which block back-travelling electrons as well as to the improvement of the structural quality of the spiro-OMeTAD film in the presence of...