Loading...
Search for: palladium-catalyst--carbon-nanotubes
0.005 seconds

    Hydro-purification of crude terephthalic acid using palladium catalyst supported on multi-wall carbon nanotubes

    , Article Journal of Industrial and Engineering Chemistry ; 2015 ; ISSN: 1226086X Tourani, S ; Khorasheh, F ; Rashidi, A. M ; Safekordi, A. A ; Sharif University of Technology
    Abstract
    Palladium catalysts supported on functionalized multi-wall carbon nanotubes were synthesized for hydro-purification of crude terephthalic acid containing 2100ppm 4-carboxybenzaldehyde (4-CBA) as impurity. PdCl2 and Pd(OAc)2 were used as precursors. Palladium loadings were 0.05 to 0.6wt.% with catalysts reduced at 200 to 400°C. Catalysts prepared from both precursors with least 0.3wt.% palladium resulted in 99%+ removal of 4-CBA. The most desired selectivity was obtained for the catalyst with PdCl2 as precursor, reduction temperature of 300°C, and palladium loading of 0.3wt.%. This catalyst had slightly better performance than the commercial catalyst (0.5wt.% of palladium on activated carbon)... 

    Hydro-purification of crude terephthalic acid using palladium catalyst supported on multi-wall carbon nanotubes

    , Article Journal of Industrial and Engineering Chemistry ; Volume 28 , August , 2015 , Pages 202-210 ; 1226086X (ISSN) Tourani, S ; Khorasheh, F ; Rashidi, A. M ; Safekordi, A. A ; Sharif University of Technology
    Korean Society of Industrial Engineering Chemistry  2015
    Abstract
    Palladium catalysts supported on functionalized multi-wall carbon nanotubes were synthesized for hydro-purification of crude terephthalic acid containing 2100ppm 4-carboxybenzaldehyde (4-CBA) as impurity. PdCl2 and Pd(OAc)2 were used as precursors. Palladium loadings were 0.05 to 0.6wt.% with catalysts reduced at 200 to 400°C. Catalysts prepared from both precursors with least 0.3wt.% palladium resulted in 99%+ removal of 4-CBA. The most desired selectivity was obtained for the catalyst with PdCl2 as precursor, reduction temperature of 300°C, and palladium loading of 0.3wt.%. This catalyst had slightly better performance than the commercial catalyst (0.5wt.%...