Sharif Digital Repository

Maritime structures such as waterfronts, offshore platforms and hulks all face different maritime sediments. There are different methods to prevent the growth of organic and non-organic material on humid surfaces, but the utilization of antifouling paints has had the most efficiency. The growth of these maritime pollutions has been stopped on hulks by the antifouling paints. Ever since the nineteenth century, antifouling paints have been utilized with different mechanisms and the most important one was the TBT self-polishing paints that were banned in 2003 by the International Marine Organization (IMO) because of the high pollution it creates in the environment. There have been many efforts... 

The rising cost of energy and the global warming in recent years have highlighted the need of more advanced systems with higher efficiency and less gas emissions. Consequently, plenty of researches have done on waste heat recovery and renewable sources of energy recently. The target of the present research is feasibility study of heat recovery in automobiles' paint ovens and designing an efficient system to use the lost energy. Research has been carried out on the theory, evaluating the amount of lost and available energy through Thermodynamics and heat transfer principle and choosing applicable design and construction of heat exchanger, especially for their use in ovens for energy recovery,... 

This paper investigates the influence of intumescent paint on the performance of FRP bars subjected to low (25–450 °C) and severe (450–800 °C) elevated temperatures. In this research, glass and carbon FRP bars with epoxy resin and coated with nitrogen-based intumescent paint were used. In addition to the temperature effects, a variety of FRP bar diameters were employed to determine its effect on the tensile behavior of FRP bars in the presence of intumescent paint. Further, Bayesian regression methods and ANOVA (ANalysis Of VAriance) were applied on the results to develop a predictive model form and quantify the contribution of the variables in the tensile performance of FRP bars,... 

Wall walking robots are designed for different purposes, rescue operations, wall inspections and jobs such as painting and cleaning and fire fighting for tall buildings. These are some cases that these types of robots are extensively used. This paper describes a design of a new serial mechanism for wall climbing job. In deed we are seeking to define a minimum degree of freedom mechanism to be applied in a robot moving vertically on a surface. This mechanism has 5 links, but at any point it works with its 4 links, actually in each cycle of motion the linkage will be interchanged. Copyright © 2006 by ASME  

In automobile painting industries, new automobile body products frequently should be tested in order to determine the actual thermal behavior of a paint curing process before starting mass production. During the hardening processes of dipped paint coating, applied in the electrophoretic enameling process, or top paint coating, applied in the final coating process, the automobile body must be warmed up according to the specific paint manufacturer curve. Consequently, prediction of car body temperature during the curing process may be vital in the design and performance analysis of the paint ovens. Numerical simulation of these processes may reduce expensive and time-consuming experimental... 

After the emergence of modern technologies in recent years, learning methods have attained a new form. Using game consoles as educational tools is a new idea which is gained attracted by some researchers. This paper proposes a new method for improving English lab classes using Sony PSP (PlayStation Portable) handheld game consoles especially for Iranian schools. © 2008 IEEE  

In this study, the effects of fiber type (i.e., carbon and glass fibers) and intumescent paint on the tensile performance of fiber reinforced polymer (FRP) sheets at elevated temperatures are investigated. For this purpose, a series of tensile tests were conducted on the glass and carbon fiber reinforced polymer (GFRP and CFRP) sheets, with and without intumescent fire retardant paint, at different elevated temperatures. The studied temperatures ranged from 25 °C to 600 °C. Scanning electron microscopy was also used to examine the effects of elevated temperatures on FRP sheets and the fire protecting mechanism of the intumescent paint. Based on the test results, the tensile strength of the... 

Condensation heat transfer on stainless steel tube utilizing superhydrophobic coatings was investigated. The electrophoretic deposition and spraying methods were employed to coat the tubes’ outer surface. The mixture that was synthesized for spray coating was a hybrid paint. It incorporated polyurethane matrix and a colloidal suspension containing organic nanoparticles. The hybrid paint had a proper adhesion to the substrate which caused more durability compared to the electrophoretic coating. The agglomeration of nanoparticles in the hybrid paint caused the formation of particles with larger size compared to the particles in the electrophoretic coating. Consequently, contact angle... 

Condensation heat transfer on stainless steel tube utilizing superhydrophobic coatings was investigated. The electrophoretic deposition and spraying methods were employed to coat the tubes’ outer surface. The mixture that was synthesized for spray coating was a hybrid paint. It incorporated polyurethane matrix and a colloidal suspension containing organic nanoparticles. The hybrid paint had a proper adhesion to the substrate which caused more durability compared to the electrophoretic coating. The agglomeration of nanoparticles in the hybrid paint caused the formation of particles with larger size compared to the particles in the electrophoretic coating. Consequently, contact angle... 

Depending on the type of dopant metal, many kinds of zircon based pigments are produced and blue vanadium pigment is the most important one of them. In this study, blue zircon ceramic pigments were synthesized from intermediate product, resulting from decomposition of zircon sand with NaOH. In this regard, various amounts of sulfuric acid, water, NH4VO3 as colorant, NaF as mineralizer and extra quartz were added to the prepared Na 2ZrSiO5. Role of quartz was to omit the repercussions of presence of free zirconia in the composition. The main objective of this work is to assess various reactions at different temperatures during blue pigment synthesis. Phase analysis was done by X ray... 

Comprehensive two-dimensional gas chromatography and flame ionization detection combined with unfolded-partial least squares is proposed as a simple, fast and reliable method to assess the quality of gasoline and to detect its potential adulterants. The data for the calibration set are first baseline corrected using a two-dimensional asymmetric least squares algorithm. The number of significant partial least squares components to build the model is determined using the minimum value of root-mean square error of leave-one out cross validation, which was 4. In this regard, blends of gasoline with kerosene, white spirit and paint thinner as frequently used adulterants are used to make... 

Automotive industry frequently needs to test new products, according to different production parameters, in order to determine the actual thermal behavior of bodies before mass production is implemented. Numerical simulation of these processes can reduce the very expensive and time consuming experimental procedures. For the drying and hardening process of the top paint applied in the coating process, the body temperature must be raised according to the paint manufacturer regulations. Consequently, prediction of temperature distribution of the car body during various zones of ovens is very vital in the design and performance analysis of the paint dryers. In this research, a novel...