Sharif Digital Repository

The globular structure of M2 high speed steel in the rolled - annealed and as cast conditions was investigated in the semisolid state. Metallographic observations resulted in globular austenite particles that were surrounded by a liquid phase. Dissolution of various carbides in the austenite phase at semisolid temperatures led to grain boundary liquation and formation of near-spherical solid grains in a liquid matrix. Therefore, at the semisolid state, the solid particles were free from carbides. MC-type and M6C-type eutectic carbides re-precipitated at the grain boundaries during cooling of the samples from the semisolid temperature. The variation of shape factor versus holding time and... 

The evolution of primary and secondary γ′ precipitates in the high γ′ volume fraction Rene 80 Ni based superalloy has been examined during aging at elevated temperatures for periods up to 1750 h. While the increase in average dimension of particles followed the cube rate Lifshitz, Slypzof and Wagner (LSW) law, rt-3-r0 -3=kt, there were significant discrepancies between the experimental and theoretical particle size distributions (PSDs) and inconsistency with the kinetic constants associated with the two populations of particles. These differences are attributed to the influence of elastic coherency strains which have not been considered in conventional capillarity driven coarsening models.... 

Emulsion flooding is a promising method for enhanced oil recovery (EOR). The static and dynamic behavior of the emulsions is greatly influenced by the nature of the applied surfactant. In this work, the effect of fatty acids, as natural surface-active agents, and their chain length on the emulsion behavior was investigated in both bulk and porous media. A panel of the fatty acids with different chain lengths (6 < C < 18) was applied at constant concentration and pH. Upon the static stability tests, emulsion stability at the optimum value of chain length (C14) was increased by two orders of magnitude. Under the optimal condition, the hydrogen bonding between dissociated and undissociated... 

The formation damage (FD) caused by the invasion of drilling fluid severely affects reservoir performance during production. Most of the published research studies which address this type of FD have been carried out at the core or field scale. Thus, the main aim of the paper is to investigate the pore-scale mechanisms of FD induced by drilling fluids and their control with silica nanoparticles (NPs) using a microfluidic approach. The proper identification of the mechanisms of FD can lead to the proper selection of NP type and concentration as well as a suitable method to remediate FD. The micromodel was designed in a way to closely simulate the cross-flow at the wellbore surface. A... 

Droplet generation is very important in biochemical processes such as cell encapsulation, digital PCR (Polymerase Chain Reaction), and drug delivery. In the present paper, a density-based method called “fluidic barrier” is introduced to produce multiple emulsions on a centrifugal microfluidic platform or Lab-on-a-CD (LOCD). We show that the density and the viscosity of the fluids involved are important parameters for predicting the characteristics of the droplets generated with this method. Moreover, we broadened this concept by using the fluidic barriers to separate reactive chemicals. As a proof of concept, alginate and CaCl2 solutions are separated by an oil barrier to control the... 

The role of emulsions as a prevalent phenomenon is broadly investigated in the petroleum industry since forming the emulsion has many severe harmful implications. Heavy components of crude oil such as wax and asphaltene make the water-in-oil (w/o) emulsion more stable, while the role of these components on the emulsion viscosity has not been fully understood. In this regard, to find a proper demulsifier to break these emulsions, it is necessary to know the mechanisms of emulsion formation by heavy oil components. In this study, the effects of waxy-oil and asphaltenic-oil on w/o emulsion were investigated by measuring volume and viscosity of the formed emulsion after an elapsed time, followed... 

The effects of Sr additions (0.3, 0.6 and 0.9 wt%) on the microstructural evolution, thermal stability, and mechanical properties of a cast Mg–4Zn alloy were investigated. The extent of grain growth and stability of the intermetallic compounds were studied by optical and scanning electron microscopy (SEM), respectively. Mechanical properties of the studied alloys were evaluated by shear punch testing (SPT) method and also the hardness test. Hardness and shear strength of the base alloy were increased by Sr additions in the as-cast condition, due to the grain refinement effect of Sr and also presence of the Sr-containing Mg17Sr2 and Mg70Zn25Sr5 precipitates. However, the optimum amount of Sr... 

Separating produced water is a key part of production processing for most crude oils. It is required for quality reasons, and to avoid unnecessary transportation costs and prevent pipework corrosion rates caused by soluble salts present in the water. A complicating factor is that water is often present in crude oil in the form of emulsions. Experiments were performed to evaluate the performance of ultrasonic fields in demulsifying crude oil emulsions using novel pipe-form equipment. A horn-type piezoelectric ultrasonic transducer with a frequency of 20 kHz and power ranging from 80 W to 1000 W was used for experimental purposes. The influences of the intensity of ultrasonic fields,...