Loading...
Search for:
osmosis-membranes
0.005 seconds
Total 23 records
Polyamide/polyacrylonitrile thin film composites as forward osmosis membranes
, Article Journal of Applied Polymer Science ; Volume 133, Issue 42 , 2016 ; 00218995 (ISSN) ; Abbaszadeh, M ; Mousavi, S. A ; Soltanieh, M ; Bakhshi, H ; Sharif University of Technology
John Wiley and Sons Inc
Abstract
Thin film composites (TFCs) as forward osmosis (FO) membranes for seawater desalination application were prepared. For this purpose, polyacrylonitrile (PAN) as a moderately hydrophilic polymer was used to fabricate support membranes via nonsolvent-induced phase inversion. A selective thin polyamide (PA) film was then formed on the top of PAN membranes via interfacial polymerization reaction of m-phenylenediamine and trimesoyl chloride (TMC). The effects of PAN solution concentration, solvent mixture, and coagulation bath temperature on the morphology, water permeability, and FO performance of the membranes and composites were studied. Support membranes based on low PAN concentrations (7 wt...
Enhance the Chlorine Resistance of Reverse Osmosis Membrane
, M.Sc. Thesis Sharif University of Technology ; Mousavi, Abbas (Supervisor) ; Abdekhodaei, Mohammad Jafar (Supervisor)
Abstract
Reverse osmosis membrane one of the common methods used for water desalination, today membrane, thin film composite(TFC) include three layers, top the these layers named selection layer, this poly amid layer contacted with feed water, sensitivity to chlorine in polyamide layer lead to high membrane chlorine sensitive. Difference methods used for enhance the chlorine resistance in polyamide membrane that categorized in three general categories, covering and protection of sensitive areas method has best results in comparison to other methods. In this research protection method choose and used, material that used, sanitized by result from surface analysis of commercial membrane manufactured in...
Improve Performance of Polyamide Reverse Osmosis Membranes by Crosslinking Treatments
, M.Sc. Thesis Sharif University of Technology ; Mousavi, Abbas (Supervisor)
Abstract
Reverse osmosis membranes are one of the most common methods of desalination of water in the world today. In the meantime, aromatic polyamide thin-film composite reverse osmosis membranes have one of the best performances and can be widely used in industry. This project aims to make surface modifications on the made raw membranes and increase the degree of crosslinking to improve the functional properties of the membrane, such as the percentage of salt rejection and the flux of permeate, and the reduction of fouling. For this purpose, polyvinyl alcohol and l-arginine along with maleic anhydride as the crosslinking agent and hexamethylene diisocyanate were used for surface modification of the...
Investigation of development features of membrane cell chlor-alkali technology
, Article CHISA 2006 - 17th International Congress of Chemical and Process Engineering, Prague, 27 August 2006 through 31 August 2006 ; 2006 ; 8086059456 (ISBN); 9788086059457 (ISBN) ; Babazadeh, F ; Kazemeini, M ; Sharif University of Technology
2006
Abstract
As the membrane technology developed at the last 30 years, the relevant processes have been significantly developed. One of which is the chlor alkali technology. The development of membrane technology and its effect on Chlor-Alkali process is capable of evaluation in to two different fields, environmental and energy consumption. Some of environmental problems of mercury and diaphragm processes because of their technological development have been eliminated the energy consumption of these processes is significantly decreased especially in membrane and diaphragm processes. Recently investigation in the field of membrane cell is more focused on cell construction, depolarized cathodes, and fluid...
Effect of Electromagnetic Field on Membrane Fouling in Filtration Process
, M.Sc. Thesis Sharif University of Technology ; Kariminia, Hamid Reza (Supervisor) ; Mousavi, Abbas (Supervisor)
Abstract
Current research studies the effect of electromagnetic field on reducing precipitation on membrane surface in reverse osmosis. Reverse osmosis is one of the most widely applied methods for water desalinization. Despite its advantages over other desalinization techniques, suffers from shortcomings such as blockage of membrane surface. Use of magnetic fields for reducing precipitation in process equipment, the so-called magnetic treatment, has been studied and practiced for decades. This research intends to study the effect of electromagnetic field on water and its mineral content, and the possibility of its application as a method for reducing precipitation and blockage in reverse osmosis...
Removal of Surface Defects and Improvement of Properties of Reverse Osmosis Membrane in Water Treatment Process
, M.Sc. Thesis Sharif University of Technology ; Bastani, Dariush (Supervisor) ; Mousavi, Abbas (Supervisor)
Abstract
The purpose of this project is to correct the surface defects of the reverse osmosis membrane. The membrane tested in this project was a thin film made of three layers of polyester, polysulfone and polyamide. These three layers provide mechanical resistance to operating pressure, suitable substrate for polyamide layer synthesis and membrane selectivity, respectively.In order to improve the surface properties and modify the reverse osmosis membrane, it was first attempted to coat it with a protective layer of polyvinyl alcohol, then by modifying this layer and improving the properties of polyvinyl alcohol and synthesizing the sulfite agent on it by the esterification reaction, to the best...
The effect of variable catalyst loading in electrodes on PEM fuel cell performance
, Article 3rd International Conference on Fuel Cell Science, Engineering, and Technology, 2005, Ypsilanti, MI, 23 May 2005 through 25 May 2005 ; 2005 , Pages 145-152 ; 0791837645 (ISBN); 9780791837641 (ISBN) ; Farhanieh, B ; Sharif University of Technology
American Society of Mechanical Engineers
2005
Abstract
Catalyst layers are one the important parts of the PEM fuel cells as they are the main place for electrochemical reaction taking place in anode and cathode of the cells. The amount of catalyst loading of this layer has a large effect on PEM fuel cell performance. Non-uniformity of reactant concentration could lead to a variation of current density in anode and cathode catalyst layer. The main reason for this phenomenon is porosity variation due to two effects: 1. compression of electrode on the solid landing area and 2. Water produced at the cathode side of diffusion layer. In this study the effect of variable current density in anode and cathode electrode on cell performance is...
Improvement of performance and fouling resistance of polyamide reverse osmosis membranes using acrylamide and TiO2 nanoparticles under UV irradiation for water desalination
, Article Journal of Applied Polymer Science ; Volume 137, Issue 11 , 2020 ; Bastani, D ; Mousavi, S. A ; Heydari, H ; Vaghar Mousavi, D ; Sharif University of Technology
John Wiley and Sons Inc
2020
Abstract
The purpose of this research is to explain the surface modification of fabricated polyamide reverse osmosis (RO) membranes using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g L−1). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm) followed by the same UV irradiation times was investigated. After that, the membranes modification was done by grafting of acrylamide blended with TiO2 nanoparticles via UV irradiation. The characterization of membranes surface properties and their performance were systematically carried out. The results...
Thin-film nanocomposite forward osmosis membranes modified with Zr-based metal–organic framework to improve desalination performance
, Article Applied Organometallic Chemistry ; Volume 34, Issue 2 , 2020 ; Bayrami, A ; Amini, M ; Sharif University of Technology
John Wiley and Sons Ltd
2020
Abstract
In present work, first, the water-stable metal–organic framework (MOF) nanocrystals, UiO-66-(F)4, were synthesized under green reaction condition and then some PES/PA thin-film nanocomposite (TFN) membranes were prepared using this synthesized nanocrystals (as modifier) and polyethersulfone (as the substrate). The obtained MOF and membranes were characterized by various characterization techniques such as FE-SEM, AFM, PXRD, contact angle measurements and FT-IR spectroscopy. Finally, the forward osmosis performance of the resultant membranes was evaluated by using different concentrations of NaCl as a draw solution and deionized water as a feed solution. Among all used membranes, the membrane...
High-performance thin-film nanocomposite (TFN) forward osmosis (FO) membranes incorporated with porous hydrophobic-core/hydrophilic-shell nanoparticles
, Article Desalination ; Volume 515 , 2021 ; 00119164 (ISSN) ; Bayrami, A ; Shekari, Z ; Amini, M ; Sharif University of Technology
Elsevier B.V
2021
Abstract
The current article discusses some unprecedented information about the improvement in forward osmosis (FO) performance of polyethersulfone/polyamide (PES/PA) membranes, mainly focused on water flux and selectivity along with resistance to fouling phenomenon; which itself is brought in by the introduction of pre-modified zeolitic imidazolate framework-8 MOF nanoparticles. An investigation has been conducted on ZIF-8 nanoparticles surface with hydrophilicity feature to evaluate their potential for utilization in active polyamide layer of FO membranes for the first time, free from any decrease in water flux value (when hydrophobic ZIF-8 is exploited solely) and selectivity (when mSiO2 with...
Zwitterion-functionalized MIL-125-NH2-based thin-film nanocomposite forward osmosis membranes: towards improved performance for salt rejection and heavy metal removal
, Article New Journal of Chemistry ; Volume 46, Issue 31 , 2022 , Pages 15205-15218 ; 11440546 (ISSN) ; Bagherzadeh, M ; Navi, H ; Nikkhoo, M ; Amini, M ; Sharif University of Technology
Royal Society of Chemistry
2022
Abstract
In the current study, thin-film nanocomposite membranes (TFN-Mx) based on a zwitterion-functionalized metal-organic framework (MOF) have been developed for the forward osmosis (FO) salt-water separation process. The active polyamide layer was formed through the interfacial polymerization of the m-phenylenediamine aqueous phase (with or without the presence of MIL-125-NH-CC-Cys) and the trimesoyl chloride organic phase. In comparison with the results from the surface of the unmodified membrane, a nanofiller-incorporated TFN-M0.10 membrane represents a smoother and more wettable surface that collaborates synergically to enhance the membrane antifouling ability. Among the examined membranes,...
Water Recycling from Output Residual Flow of Reverse Osmosis Membranous Units
, M.Sc. Thesis Sharif University of Technology ; Moosavi, Abbas (Supervisor)
Abstract
In this research, we focus on reduction of solutes in left out water from reverse osmosis membranous units (brine) with reduction of scaling factors of membrane. This research is important from that perspective that the out put brine from reverse osmosis membranous unit After purification by this method, enter into membranous system in order to increase in recovered water volume and also minimization of out put waste from membranous system and decrease the environmental damages. The method used in this research, is three processes of cooling, chemical desalination and seeding by crystal material. In this research is investigated the type and amount of matter for chemical desalination and...
Study of Surface Properties and Performance of Reverse Osmosis Membranes after Surface Modification via Irradiation
, Ph.D. Dissertation Sharif University of Technology ; Bastani, Dariush (Supervisor) ; Mousavi, Abbas (Supervisor)
Abstract
Today reverse osmosis (RO) is the dominant technology for desalination. Most of commercially available RO membranes are polyamide thin film composite (TFC) types which exhibit good performance. However, the major obstacle for application of polyamide TFC RO membranes is fouling which can be mitigate by surface modification.In this research, surface modification of fabricated aromatic polyamide TFC RO membranes was carried out using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g/L). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm)...
Hydrodynamic Simulation of Flow in Reverse Osmosis Membranes for Seawater Disalination
, M.Sc. Thesis Sharif University of Technology ; Seif, Mohamad Saeed (Supervisor) ; Mehdigholi, Hamid (Supervisor)
Abstract
Water is the most essential human need and the lack of fresh water soon is one of the biggest problems of mankind. One way to deal with the lack of fresh water is desalination of seawater. Seawater desalination is done by different thermal and membrane methods. In this research, the methods and history of freshwater supply methods and the role of chains in the progress of seawater desalination, and the measures taken in the field of seawater desalination have been investigated. Among the various methods discussed and proposed in this research, it was concluded that reverse osmosis membrane is available and has an acceptable economic efficiency compared to other methods. After choosing the...
Ultrahigh permeable C2N-inspired graphene nanomesh membranes versus highly strained c2n for reverse osmosis desalination
, Article Journal of Physical Chemistry B ; Volume 123, Issue 41 , 2019 , Pages 8740-8752 ; 15206106 (ISSN) ; Akhavan, O ; Sharif University of Technology
American Chemical Society
2019
Abstract
The reverse osmosis (RO) desalination capability of hydrogenated and hydroxylated graphene nanomesh membranes (GNMs) inspired by the morphology of carbon nitride (C2N) has been studied by using molecular dynamics simulation. As an advantage, water permeance of the GNMs is found to be several orders of magnitude higher than that of the available RO filters and comparable with highly strained C2N (S-C2N) as follows: 6,6-H,OH > 12-H > S-C2N > 5,5-H,OH > 10-H. The reverse order is found for salt rejection, regardless of S-C2N. The hydrophilic character of the incorporated -OH functional group is believed to be responsible for linking the water molecules in feed and permeate sides via the...
An efficient graphyne membrane for water desalination
, Article Polymer ; Volume 175 , 2019 , Pages 310-319 ; 00323861 (ISSN) ; Moosavi, A ; Sharif University of Technology
Elsevier Ltd
2019
Abstract
Desalination of sea saline water seems a successful solution to supply clean water. For desalination, novel nanoporous membranes have been proposed as a substitute for the classic reverse osmosis (RO) membranes. The one-atom-thick graphyne membrane has shown great potential in water desalination. By applying functional groups (FGs) into the pores of the monolayer graphyne membranes, the water permeability and the ion rejection were passively increased. The effects of applying various FGs such as Hydrogen, Fluorine, Carboxyl and Amine, effect of the salt concentration, the applied pressure, and the effective diameter of the graphyne pores were determined by molecular dynamics (MD)...
On the design of graphene oxide nanosheets membranes for water desalination
, Article Desalination ; Volume 422 , 2017 , Pages 83-90 ; 00119164 (ISSN) ; Tavakoli, R ; Sharif University of Technology
Elsevier B.V
2017
Abstract
According to current researches, graphene oxide (GO) membranes show promising desalination properties due to ease of synthesis, low production cost, and high efficiency. There are several experimental works to study ionic sieving properties of GO membranes. However, it is difficult to characterize atomistic mechanism of water permeation and ion rejection by experimental approaches. On the other hand, there exist a few reports in which the atomistic picture of water permeation across GO membranes is investigated by means of molecular dynamics (MD) simulation. In the present work, in addition to water desalination, the atomic scale mechanism of ion rejection is studied using large scale MD...
Enhancement of surface properties and performance of reverse osmosis membranes after surface modification: a review
, Article Desalination ; Volume 420 , 2017 , Pages 330-383 ; 00119164 (ISSN) ; Bastani, D ; Musavi, S. A ; Sharif University of Technology
Abstract
Reverse osmosis (RO) membrane process has become the most promising technology for desalination to produce purified water. Among numerous polymeric materials used to fabricate RO membranes, aromatic polyamide thin film composite (TFC) membranes are dominant in commercial RO membrane processes because of their high salt rejection and water permeability as well as their excellent chemical, thermal, and mechanical stability. However, the major hindrance to the effective application of polyamide TFC RO membranes is membrane fouling. Furthermore, polyamide TFC RO membranes have limited stability to chlorine, which is commonly used as disinfect to control membrane biofouling. These two factors...
Preparation of poly(vinyl chloride) (PVC) ultrafiltration membranes from PVC/additive/solvent and application of UF membranes as substrate for fabrication of reverse osmosis membranes
, Article Journal of Applied Polymer Science ; Volume 135, Issue 21 , 2018 ; 00218995 (ISSN) ; Asadollahi, M ; Musavi, A ; Bastani, D ; Sharif University of Technology
John Wiley and Sons Inc
2018
Abstract
Ultrafiltration (UF) membranes were prepared from poly(vinyl chloride) (PVC) as main polymer, poly(vinyl pyrrolidone) (PVP) as additive, and 1-methyl-2-pyrrolidone (NMP) as solvent using Design Expert software for designing the experiments. The membranes were characterized by SEM, contact angle measurement, and atomic force microscopy. The performance of UF membranes was evaluated by pure water flux (PWF) and blue indigo dye particle rejection. In addition, the molecular weight cutoff of UF membranes was determined by poly(ethylene glycol) (PEG) rejection. The UF membranes were used as substrates for fabrication of polyamide thin film composite (TFC) reverse osmosis (RO) membranes. The...
Conceptual arrangement and basic design of drinking water reverse osmosis desalination plants
, Article International Journal of Environmental Science and Technology ; Volume 18, Issue 12 , 2021 , Pages 4019-4036 ; 17351472 (ISSN) ; Farhadi, F ; Sharif University of Technology
Springer Science and Business Media Deutschland GmbH
2021
Abstract
To propose a conceptual arrangement of reverse osmosis desalination plants, four comprehensive decision algorithms and a software are developed. Typically, commercial software predict the performance of the reverse osmosis membranes based on their pre-determined configuration; however, the developed decision algorithms and the developed software in this study have the capability of introducing the conceptual arrangement of pretreatment units, reverse osmosis membranes, and energy recovery devices for both seawater and brackish water reverse osmosis plants. To perform a comprehensive study, alongside the developed software and the decision algorithms, both design considerations of the...