Sharif Digital Repository

A telescoped approach was developed for the efficient synthesis of methoxybenzene through the generation of an unstable intermediate reagent, based on the Br-Li exchange reaction of p-bromoanisole and n-BuLi, followed by its reaction with water. In the first stage, p-methoxyphenyllithium was synthesized and consumed immediately in the second stage. For this purpose, an integrated glass microfluidic device was fabricated using laser ablation followed by the thermal fusion bonding method. The impact of various parameters, including solvent, reaction time, molar ratio, concentration of reagents, and flow rates were investigated to achieve the highest yield of the desired product, leading to an... 

The synthesis and structures of two new octadentate, Schiff-base calixpyrrole macrocycles are presented in which modifications at the meso-substituents (L1) or the aryl spacer between the two pyrrole-imine donor compartments (L2) are introduced. The outcomes of these changes are highlighted in the structures of binuclear Pacman complexes of these macrocycles, [M2(L1)] and [M2(L 2)]. Both palladium and cobalt complexes of the fluorenylmeso- substituted macrocycle H4L1 adopt rigid, but laterally twisted geometries with enclosed bimetallic microenvironments; a consequence of this spatial constraint is an exo-exo-bonding mode of pyridine in the dicobalt complex [Co2(py)2(L1)]. In contrast, the... 

Herein we describe the synthesis and characterization of the first platinum(IV) metal-organic cage [(Me3PtIV)8(byp)12](OTf)8 (2), in which the organometallic moieties trimethylplatinum(IV) (PtMe3) occupied the corners of a cubane structure and 4,4′-bipyridine ligands used as linkers. The first-principles density functional theory calculations showed that the highest occupied molecular orbitals were localized on the PtMe3 moieties, while the lowest unoccupied molecular orbitals were distributed on the organic linkers. © 2021 American Chemical Society  

A very efficient and mild procedure for the trimethylsilylation of a wide variety of alcohols, including primary, allylic, benzylic, secondary, hindered secondary, tertiary, and phenols with hexamethyldisilazane on the surface of silica gel dispersed with LiClO4 in room temperature at few minutes in excellent yields under neutral conditions is reported. This procedure also allows the excellent selectivity under LP-SiO2 system for silylation of alcohols in the presence of amine and phenolic hydroxy groups. © 2005 Elsevier B.V. All rights reserved  

In this study, a hydrophilic metal-organic framework (MOF) was applied to improve the performance of a cellulosic membrane for forward osmosis (FO) desalination application. The characterization results confirmed that the MOF particles existed within the matrix of the modified membrane. The MOF loading led to adjustment of the membranes in terms of overall porosity, pore inter-connectivity and hydrophilicity. These features caused an improvement in the pure water permeability (72%) and reduce the structural parameter of the modified membrane to 136 μm. The FO water flux of the modified membrane enhanced by about 180% compared to an unmodified membrane, without decreasing its selectivity. FO... 

Nanocages (NCs) have emerged as a new class of drug-carriers, with a wide range of possibilities in multi-modality medical treatments and theranostics. Nanocages can overcome such limitations as high toxicity caused by anti-cancer chemotherapy or by the nanocarrier itself, due to their unique characteristics. These properties consist of: (1) a high loading-capacity (spacious interior); (2) a porous structure (analogous to openings between the bars of the cage); (3) enabling smart release (a key to unlock the cage); and (4) a low likelihood of unfavorable immune responses (the outside of the cage is safe). In this review, we cover different classes of NC structures such as virus-like... 

A unique combination of a supported cobalt complex and the first example of supported NHPI in acetic acid gives a surprisingly stable heterogeneous catalytic system for the selective aerobic oxidation of methylaromatics to benzaldehydes at atmospheric pressure. © The Royal Society of Chemistry 2005  

Conditions for an efficient ligand-free Heck C-C coupling reaction of aryl iodides and bromides with terminal olefins under aerobic conditions have been developed. Critical to the success of this new protocol is the use of palladium acetate as an extremely active catalyst for the Heck reaction in water and aqueous media. Both the base and the solvent were found to have a fundamental influence on the efficiency of the reaction, with K2CO3 and a mixture of (2:1) H2O/DMSO being the optimal base and solvent, respectively  

A metal-organic framework [Co3(BDC)3(DMF)2(H2O)2] was synthesized and structurally characterized. X-ray single crystal analysis revealed that the framework contains a 2D polymeric chain through coordination of 1,4-benzenedicarboxylic acid linker ligand to cobalt centers. The polymer crystallize in monoclinic P21/n space group with a=13.989(3) Å, b=9.6728(17) Å, c=16.707(3) Å, and Z=2. The polymer features a framework based on the perfect octahedral Co-O6 secondary building units. The catalytic activities of [Co3(BDC)3(DMF)2(H2O)2]n for olefins oxidation was conducted. The heterogeneous catalyst could be facilely separated from the reaction mixture, and reused three times without significant... 

Spherical dielectric particles, nanofibers, and nanorods have been widely used as embedded scattering objects in nanostructured thin film solar cells. Here we propose micron-scale rod-like dielectric particles as a more effective alternative to the spherical ones for light trapping in thin film solar cells. The superior performance of these micro-rods is attributed to their larger scattering efficiency relative to the spherical particles as evidenced by full-wave optical calculations. Using a one-pot process, 1.7 μm-long bullet-shaped silica rods with 330 nm diameter are synthesized and their concentration in a N719-sensitized solar cell is optimized. A solar cell with an optimal... 

The effect on the thermal parameters of superconducting transition-edge bolometers produced on a single crystalline SrTiO3 (STO) substrate with and without a CeO2 buffer layer was investigated. Metal-organic deposition was used to deposit the 20-nm CeO2 buffer layer, whereas RF magnetron sputtering was applied to fabricate 150-nm-thick superconducting YBa2Cu3O7-δ (YBCO) thin film. The critical transition temperature for both of the YBCO films was 90 K, and the transition width was ∼1.9 K. The bolometers fabricated from these samples were characterized with respect to the voltage phase and amplitude responses, and the results were compared with that of simulations conducted by applying a... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

Metal Organic Frameworks (MOFs) have received enormous attention in catalysis field due to their special structures and various promising applications. One of the intriguing applications of MOFs is utilization of them as precursors for synthesis of metal oxide nanomaterials. Base on this strategy, in this work, we have applied Cu-MOF to prepare a series of noble metal nanoparticles (Ag and Au) decorated CuO (M/CuO) as efficient catalyst. As-prepared nanocomposites were characterized by various analytical techniques and their catalytic performances appraised by using of the catalytic reduction of p-nitrophenol to p-aminophenol as a reliable model reaction. Experimental results suggest that... 

In this study, zeolitic imidazolate framework (ZIF-8) as a metal-organic framework (MOF) and its hybrid nanocomposites based on graphene oxide (GO) and carbon nanotubes (CNTs) were synthesized by facile method at an ambient temperature. The sufficiency of GO and CNT substrates as the main components of the composites to grow nanoscale MOFs and increase dispersive forces were investigated. The characteristics of the MOF and hybrid nanocomposites were studied using FTIR, SEM, XRD, BET and TGA techniques. The prepared nanomaterials applied as adsorbents to remove malachite green (MG) as a cationic dye from colored wastewater. The removal rates of the hybrid nanocomposites were greater than that... 

Three versions of zirconium-based metal organic frameworks, NH2-UiO-66, GMA-UiO-66, and EDA-UiO-66, were synthesized and employed as adsorbent for CO2/CH4 separation. GMA-UiO-66 was synthesized via a ring opening reaction between the amine species in the framework and epoxy groups in glycidyl methacrylate (GMA), while the green aza-Michael addition reaction was used for the first time to functionalize GMA-UiO-66 with ethylenediamine (EDA). The products were characterized by BET, XRD, TGA, FESEM, ICP-OES, 1H NMR, mass spectroscopy, and FTIR-ATR methods to monitor their textural properties before and after functionalization. The results indicated that GMA was successfully grafted to the... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

Zinc-rich ethyl silicate coatings are quite successful in protecting steel against corrosion under severe exposing conditions. In spite of providing excellent cathodic protection to steel structure after film curing, two-component zinc-rich ethyl silicate coatings have some limitations, one of which is inadequate shelf life as a result of in-can binder gelation. In this work, the preparation steps of ethyl silicate such as pre-hydrolysis, dehydration and organometallic reactions were surveyed and herein an approach towards understanding the cause and effect relationship of the use of ingredients is presented. The effects of water and catalytic acid dosages on gel time under accelerated... 

Since Gram-negative bacteria have a predominant role in nosocomial infections, there are high demands to develop a fast and sensitive method for diagnosis of bacteria in clinical samples. To address this challenge, we designed a novel electrochemical biosensor based on aptamers immobilized in engineered zeolitic imidazolate Framework-8 (ZIFs-8) via EDC-NHS chemistry. Cyclic voltammetry and electrochemical impedance spectroscopy techniques were conducted to monitor the electrochemical characterization. With respect to unique π-πinteractions between aptamer and graphene oxide (GO), the differential pulse voltammetry technique was applied with ferrocene-graphene oxide (Fc-GO) as an... 

In this research, an adsorbent with manifold interplay sites for the adsorption of sulfur components is developed in a silver ion functionalized Cr3+ based metal-organic framework (MIL-101(Cr)-SO3Ag). The adsorption performance of MIL-101(Cr), MIL-101(Cr)-SO3H, and MIL-101(Cr)-SO3Ag was evaluated in dynamic adsorption system in terms of its adsorption capacity. MIL-101(Cr)-SO3Ag could interact with H2S through multiple ways which performed about 4 times higher adsorption capacity (96.75 mg/g) rather than MIL-101(Cr); further, the high adsorption capacity of MIL-101(Cr)-SO3Ag was almost unchanged after five successive adsorption–desorption cycles, making it a potential adsorbent for an... 

We demonstrated a novel mixed-matrix composite membrane (MMCM) based on acrylated polyurethane (APU) and UiO-66 nanoparticles to separate CO 2 /N 2 mixture. UiO-66 and functionalized UiO-66 including NH 2 -UiO-66 and glycidyl methacrylate (GMA)-UiO-66 were loaded into APU/2-hydroxyethyl methacrylate (APUH) matrix at variable concentrations between 3 and 30 wt %. APUH/GMA-UiO-66 MMCMs exhibited strong adhesion with a support layer of polyester/polysulfone, which was not deteriorated after immersion in water for a long time (20 days). Incorporation of UiO-66 and its functionalized forms increased simultaneously permeability and CO 2 /N 2 selectivity, which were indeed superior in comparison...