Sharif Digital Repository

Design and construction of an optical fiber sensor for liquid level detection are reported. This sensor operates based on light intensity modulation, and such modulation results from alteration of total internal reflection into partial reflection at the interface. The modulated intensity has been measured by using a pair of fibers, one transmitting source light, another acting as receiving fiber, and a glass prism providing the total and partial reflections. During the level measurements, when a liquid in a vessel touches the 45° faces of the 45-90-45° prism, the total internal reflection is disturbed, and the reflected light is modulated. The performance of this sensor is tested with... 

Design and operation of an optical fiber device for temperature sensing and thermal expansion measurement are reported. The modulated intensity has been measured by using a pair of 450 μm core fiber, one acting as the source and the other one as receiving fiber. In this design, the light intensity modulation is based on the relative motion of the optical fibers and a reflective coated lens. By using displacement calibration data for this sensor, the linear thermal expansion of the aluminum rod is determined. This sensor shows an average sensitivity of about 11.3 mV/°C for temperature detection and 7 μm/°C for thermal expansion detection. Device resolution for a linear expansion measurement... 

Optical fibers, in particular, glass fibers, are mostly used in the field of optical communication, however in recent years new optical sensors based on the optical fibers have been reported in literature and produced commercially. Extrinsic and intrinsic character of the fibers have been implemented in development of such sensing devices. Glass Optical Fibers (GOF) because of low attenuation are more suitable for the optical communication purposes while Plastic Optical Fibers are advantageous for the linking purpose and some sensing operations. Considering this point different (POF) optical fiber sensors have been developed by author to show potential applications of POFs in sensor... 

Operation of an optical system for surface profiling is reported here. Reflection signals for the plane and cylindrical surfaces with different materials are reported. To investigate the precision and sensitivity of the reported system the reflection results of the curved and flat structured surface are compared with that of a structure-free surface. Reported system provides a simple and accurate means for the object shape study through the optical reflection measurements  

The deposition of tetrakis (4-sulonatophenyl) porphyrin (TPPS) thin film on optical fibers presents many possibilities for sensing applications. The J-form aggregation with a narrow and sharp spectral feature at about 490 nm and its sensitivity to humidity have been discussed; a fast change of wavelength occurs according with variation in the humidity level. The reproducibility and high sensitivity of TPPS-coated fibers, along with the capabilities of optical fibers, suggest the device as a good candidate for humidity sensing in harsh environments. © 2018, The Author(s)  

The Virtually-Imaged-Phased-Array (VIPA) is a modified version of etalon used as a hyperfine spectral disperser. We have developed an analytical Gaussian beam tracing formulation which can model the VIPA output pattern and the effects of polarization changes  

In this study the optical beam transfer and imaging in an optical fiber coupling is discussed. In coupling two fibers, some measurements from intensity perspective are performed and intensity profile is investigated. A theoretical model for the power transmission in fiber coupling is developed and theoretical function is compared with the experimental results. The amount of light delivered to the receiving fiber depends on the acceptance angle of the receiving fiber and the core cross sections of both fibers. Intensity profile function obtained theoretically agrees well with the measured results. The intensity variation as a function of the air gap variation is investigated in this article.... 

In this article design and operation of a plastic optical fiber (POF) sensor based on the unconventional light leakage from one fiber to another one causing intensity modulation are presented. The dominant loss mechanism was found to be the evanescent loss and based on this phenomenon the optical fiber sensor was designed. The penetration depth of evanescent wave as a function of different refractive index of cladding was calculated. Operation of this sensor was tested as a liquid level sensor for different liquids and the experimental results are compared. The dry (air interface layer) and wet output (liquid interface layer) signals for this probe were measured for a series of measurements... 

Design and operation of an optical fiber sensor based on the intensity modulation is reported in this article. Two distinct mechanisms are considered for the optical power loss and the sensor operation is explained in terms of these effects. The dominant loss mechanism is found to be the evanescent loss and based on this phenomenon the optical fiber sensor is designed. Performance of this sensor is tested as a liquid level sensor for water and the experimental results are reported. The dry and wet signals for this probe are measured for a series of measurements and important factors concerning the design and operation of sensor are described. The precision of measured values, reproducibility... 

We propose a new system which can generate digital holograms using natural color information. The proposed system can generate about 10 digital holographic video frames per a second using about 6K light sources  

In our previous work, a distributed moisture sensor based on the induced long-period fiber grating in the presence of moisture is proposed. The proposed structure is analyzed numerically (Opt Laser Technol 117:126–133, 2019). In this article, due to the axial symmetry and periodic structure of the proposed sensor, the Love’s potential and Fourier series are employed to obtain an analytical solution for the refractive index variation along the sensor versus moisture density. The analytical method reduces the computation time relative to our numerical calculation drastically. The analytical results are in good agreement with those that are obtained by numerical calculations. The analytical... 

In this paper, the variational method is employed for minimizing the gain ripple of multi-wavelength fiber Raman amplifiers. The variance of gain spectrum of the fiber Raman amplifier is regarded as the cost function, restriction on total pump power and average gain is given as the constraints of the minimization problem. It is shown that the minimization problem with any necessary constraints on the pump powers, average gain and signal to noise ratio, is reduced to a two-point boundary value problem. The method gives the entire possible local and global solutions. The method is applied to different examples of fiber Raman amplifiers with different lengths from 25 km to 100 km and different... 

Design and operation of an optical fiber sensor based on the light leakage from one fiber to another one causing intensity modulation are reported. Performance of this sensor is tested as a liquid level sensor for different liquids and the experimental results are reported. The dry and wet signals for this probe are measured for a series of measurements and important factors concerning sensor operation are described. The precision of measured values, reproducibility of the results (1.3%), and the stability of sensing operation as a function of time at different launching powers are also reported (0.8%). The reported results are promising and verify the successful operation of such a device... 

Assuming that Pauli channels simulate the effect of optical fibers on polarization entangled photons we theoretically find the threshold distance beyond which such pairs loose their entanglement. From the current experimental data and by taking into account all other loss factors, like absorption, we give estimates for these threshold distances. © 2006 Elsevier B.V. All rights reserved  

We describe a semi-analytical approach for the three-dimensional analysis of photonic crystal fibre devices. The approach relies on modal transmission-line theory. We offer two examples illustrating the utilization of this approach in photonic crystal fibres: the verification of the coupling action in a photonic crystal fibre coupler and the modal reflectivity in a photonic crystal fibre distributed Bragg reflector. © 2005 IOP Publishing Ltd  

Scattering of a Gaussian beam by a spherical dielectric object is studied using the vectorial Gaussian beam tracing method. Expansion to a few Gaussian beams with the smaller waists has been used to extend the method to a more generalized one. This method can be applied to a large variety of different shape objects and incident beam profiles. Numerical results of this computationally fast method show a good agreement with the results represented in the literature. © 2004 IEEE  

A simple analytic formula is derived to extract tiny dispersion fluctuations along highly nonlinear fibers from distributed measurements of parametric gain. A refined BOTDA scheme, suitable to track Kerr processes, enables low noise measurements  

Design and operation of a double-fiber sensor for displacement measurements are reported in this study. In this arrangement, one fiber transmits the laser light to the target and the second one receives the light reflected off the target and transmits to a photodetector. Utilizing inexpensive plastic optical fibers offers advantages such as higher reflexability and more robustness at a reasonable cost, which are required for some applications. The novelties of the reported design are compactness of the fiber probe, flexibility, long dynamic range (22 mm), and it is possible to use the source and the detector at the same side. The displacement of the target causes the intensity modulation and... 

The transient response of all optical gain clamped multi channel erbium doped fiber amplifiers (EDFA's) and optical fiber inverter is studied by a semi-classical model. Using the semi-classical theory, the electric field interacting with mater is considered classical and the medium is quantized according to the equations of motion for density matrix. The rate equations and "self consistency" equations, which yield amplitude and phase of the electric fields of oscillator and amplifying channels are derived by considering Maxwell's equations and equation of motion of density matrix. The governing equations form a system of coupled partial differential equations. The relaxation oscillation... 

Network survivability gauges the ability of a network to support the committed Quality of Services (QoS) continuously in the presence of various failure scenarios. We perceive that both performance and availability are integral components of survivability. Therefore, we propose a composite model for survivability that consists of performance and availability analysis. A analytical technique is presented to find the excess loss due to failure (ELF) when the system is operating in gracefully degraded states. An algorithm is proposed to carry out the availability analysis of the network even when the available paths between nodes are non-disjoint. These two models are combined to construct a...