Sharif Digital Repository

Purpose - The purpose of this paper is to investigate the performance of a specific class of high-resolution central schemes in conjunction with the black oil models for hydrocarbon reservoir simulation. Design/methodology/approach - A generalized black oil model is adopted, in which the solubility of gas in both oil and water and evaporation of oil are considered, leading to a system of equations prone to degeneracy. A computer code is generated and three test cases are solved to evaluate the performance of various schemes in terms of accuracy and discontinuity handling. Findings - It is shown that, although some of the central schemes are highly sensitive to the choice of... 

In this article, the transesterification of waste cooking oil (WCO) to biodiesel fuel (BDF) has been studied using KOH loaded on millimetric γ-Al2O3 particles in a novel type of two-impinging-jets reactor (TIJR). The effects of various parameters such as KOH loading (wt %), catalyst loading, and methanol-to-oil molar ratio on the BDF yield were studied. The catalyst particles with a KOH loading of 25 wt % at appropriate reaction conditions (i.e., catalyst loading = 4 wt % and methanol-to-oil molar ratio = 15:1) and at 65 °C were used in the TIJR. The influences of various operating and design parameters such as jet Reynolds number value, feed flow rate, jet diameter, and the internozzle... 

Owning to interesting properties of biosurfactants such as biodegradability and lower toxicity, they have broad application in the food industry, healthy products, and bioremediation as well as for oil recovery. The present study was aimed to develop a GA-ANFIS model for predicting the breakthrough curves for rhamnolipid adsorption over activated carbon. To that end, a set of 296 adsorption data points were utilized to train the proposed FIS structure. Different graphical and statistical methods were also used to evaluate the model's accuracy and reliability. Results were then compared to those of the previously reported Artificial Neural Network (ANN) and Group Method Data Handling (GMDH)... 

The potential utilization of encapsulation techniques in food, pharmaceutical and agricultural products preparation, presents a new alternative for complementary technologies such as targeting delivery vehicles and carriers for active food ingredients. Encapsulation could be accomplished by different techniques like: simple or complex coacervation, emulsification technique, phase separation, spray drying, spray chilling or spray cooling, extrusion coating, freeze drying, fluidized-bed coating, liposomal entrapment, centrifugal suspension separation, co-crystallization and molecular inclusion complexation. Encapsulation is a method by which one bioactive material or mixture of materials is... 

A procedure based on the linear amplitude sweep (LAS) test has been developed to determine the optimum rejuvenator content for restoring the properties of aged asphalt binders. The LAS test was employed to assess the damage tolerance, fatigue resistance, and fracture behavior of rejuvenated aged binders. In case of fracture analysis, a crack-based indicator to govern the stable crack propagation was defined to characterize fracture resistance of asphalt binders. While rejuvenators improved all of these properties, higher contents were required to restore the cracking behavior of the original binder. The linear relationship between the integrated damage-fatigue-fracture indicator and... 

In this study, biodiesel (FAME) was prepared using a novel heterogeneous catalyst of phosphomolybdic acid (H3PMo12O40, HPMo)/support graphene oxide (GO). The characterization of the catalyst was evaluated by SEM, EDX, Map analysis, TEM, FT-IR, and Raman analyses. The production of biodiesel from waste cooking oil (WCO) was carried out by the electrolysis method. The process of the trans-esterification reaction was optimized by applying the response surface methodology (RSM) based on the central composite design (CCD) approach. The effects of four independent variables of methanol to oil molar ratio (6–12 mol:mol), catalyst weight (0.5–1.5 wt%), time (8–24 h), and voltage (30–70 V) were... 

Watermelon seed oil characteristics were evaluated to determine whether this oil could be exploited as an edible oil. Hexane extraction of watermelon seeds produced yields of 50% (w/w) oil. The refractive index, saponification and iodine value were 1.4712 (at 25 °C), 200 mg KOH/g and 156 g I/100 g, respectively. The acid and peroxide values were 2.4 mg KOH/g and 3.24 mequiv/kg, respectively. The induction time of the oil was also 5.14 h at 110 °C, which was measured for the first time. Total unsaturation contents of the oil was 81.6%, with linoleic acid (18:2) being the dominant fatty acid (68.3%). Considering that the watermelon seed oil was highly unsaturated, the relatively high induction... 

In this study, biodiesel (FAME) was prepared using a novel heterogeneous catalyst of phosphomolybdic acid (H3PMo12O40, HPMo)/support graphene oxide (GO). The characterization of the catalyst was evaluated by SEM, EDX, Map analysis, TEM, FT-IR, and Raman analyses. The production of biodiesel from waste cooking oil (WCO) was carried out by the electrolysis method. The process of the trans-esterification reaction was optimized by applying the response surface methodology (RSM) based on the central composite design (CCD) approach. The effects of four independent variables of methanol to oil molar ratio (6–12 mol:mol), catalyst weight (0.5–1.5 wt%), time (8–24 h), and voltage (30–70 V) were... 

Droplet-based microfluidics technologies hold great attention in a wide range of applications, including chemical analysis, drug screening, and food industries. This work aimed to describe the effects of different physical properties of the two immiscible phases on droplet formation in a flow-focusing microfluidic device and determining proper flow rates to form a droplet within the desired size range. A numerical model was developed to solve the governing equations of two-phase flow and the results were validated with previous experimental results. The results demonstrate different types of droplet formation regimes from dripping to jetting and different production rates of droplets as a... 

Microfluidic systems are an interesting topic for investigation due to their wide-spreading applications. Nowadays, polymeric solutions are used mainly for the generation of microparticles in biomedical engineering, food, and pharmaceutical industries. Droplet-based microfluidic devices have proposed an extensive interest in many applications such as chemical/biological/nanomaterial preparation to understand deeply the droplet size and formation in microchannels. However, numerous experimental and numerical studies have been done for oil-water combination, polymeric solutions behavior in the presence of oil has not been investigated widely. Therefore, it is important to understand the... 

Gas chromatography-mass spectrometry (GC-MS) combined with Chemometric resolution techniques were proposed as a method for the analysis of volatile components of Iranian damask rose oil. The essential oil of damask rose was extracted using hydrodistillation method and analyzed with GC-MS in optimized conditions. A total of 70 components were identified using similarity searches between mass spectra and MS database. This number was extended to 95 components with concentrations higher than 0.01% accounting for 94.75% of the total relative content using Chemometric techniques. For the first time in this work, an approach based upon subspace comparison is used for determination of the chemical...