Sharif Digital Repository

This investigation presents both theoretical and experimental studies on the size of a growing bubble in power-law non-Newtonian liquids. At first, some previous works on the prediction of bubble size in Newtonian liquids have been extended by considering the balance of forces acting on the bubble at the moment of separation. Predicted bubble sizes were validated against the experimental results for a wide range of operating conditions, including different gas flow rates and needle diameters as well as a wide range of physical properties of the Newtonian liquids. Furthermore, in order to determine the size of the bubbles formed in power-law non-Newtonian liquids with a similar analysis, the... 

Electroosmosis has many applications in fluid delivery at microscale, sample collection, detection, mixing and separation of various biological and chemical species. In biological applications, most fluids are known to be non-Newtonian. Therefore, the study of thermal features of non-Newtonian electroosmotic flow is of great importance for scientific communities. In the present work, the fully developed electroosmotic flow of power-law fluids in a slit microchannel is investigated. The related equations are transformed into non-dimensional forms and necessary changes are made to adapt them for non-Newtonian fluids of power-law model. Results show that depending on different flow parameters... 

Creating hydraulically induced fractures in oil/gas reservoirs is one of the methods for Enhanced Oil Recovery (EOR) that has been applied extensively in petroleum industry in recent years. Despite its popularity, the design process of Hydraulic Fracture treatment is mostly empirical based on the previous experiences gained in the oil-rich formation. The reason lies in the complexities involved in the Hydraulic Fracture process including interacting effects of fluid(s) flowand solid deformations, injection of non-Newtonian fluids in the porous media, leak-off of the injected fluid into the formation, complex geometry of the induced fracture in the intact or naturally fractured rock,... 

We provide the simulation of electroosmotic phenomenon in nanochannels using the Dissipative Particle Dynamics (DPD) method. We study the electroosmotic phenomenon for both newtonian and non-newtonian fluids. Literature shows that most of past electroosmotic studies have been concentrated on continuum newtonian fluids. However, there are many nano/microfluidic applications, which need to be treated as either non-newtonian fluids or non-continuum fluids. In this paper, we simulate the electroosmotic flow in nanochannel considering no limit if it is neither continuum nor non-nonewtonian. As is known, the DPD method has several important advantages compared with the classical molecular dynamics... 

Contraction flow is one of important geometries in fluid flow both in Newtonian and non-Newtonian fluids. In this study, flow of a viscoelastic fluid through a planar 4:1 contraction with rounded corners was investigated. Six different rounding ratios (RR =0, 0.125, 0.25, 0.375, 0.438, 0.475, 0.488) was examined using the linear PTT constitutive equation at creeping flow and isothermal condition. Then the resulting PDE set including continuity, momentum, and PTT constitutive equations were implemented to the OpenFOAM software. The results clearly show vortex deterioration with increasing rounding diameter, so that when rounding corner exceeds a critical value, the vortex disappears... 

We use the dissipative particle dynamics (DPD) method to simulate the non-Newtonian electroosmotic flow (EOF) through nanochannels. Contrary to a large amount of past computational efforts dedicated to the study of EOF profile, this work pays attention to the EOF of non-Newtonian fluids, which has been rarely touched in past publications. Practically, there are many MEMS/NEMS devices, in which the EOF behaviour should be treated assuming both non-continuum and non-Newtonian conditions. Therefore, our concern in this work is to simulate the EOF through nanochannels considering both non-Newtonian fluid properties and non-continuum flow conditions. We have chosen DPD as our working tool because... 

Since the discovery of inertial focusing in 1961, numerous theories have been put forward to explain the migration of particles in inertial flows, but a complete understanding is still lacking. Recently, computational approaches have been utilized to obtain better insights into the underlying physics. In particular, fundamental aspects of particle focusing inside straight and curved microchannels have been explored in detail to determine the dependence of focusing behavior on particle size, channel shape, and flow Reynolds number. In this review, we differentiate between the models developed for inertial particle motion on the basis of whether they are semi-analytical, Navier-Stokes-based,... 

The biomicrofluidic devices utilizing electrophoresis for sample manipulation are usually encountered with non-Newtonian behavior of working fluids. Hence, developing theoretical models capable of predicting the electrophoretic velocity of colloidal particles in non-Newtonian fluids is of high importance for accurate design and active control of these devices. The present investigation is dealing with the electrophoresis of a spherical particle in a biofluid obeying the Quemada rheological model. The sphere radius is considered to be significantly larger than the Debye length. Moreover, it is assumed that the particle zeta potential is small so that the Debye-Hückel linearization is... 

The influence of variable fluid properties on mixed electroosmotic and pressure driven flow of non-Newtonian fluids is investigated in this paper. The non-linear coupled energy and momentum equations are solved by means of an iterative numerical approach. The results reveal that the temperature dependent effects only become significant at very high values of the Debye-Hückel parameter in case of combined electroosmotic and pressure driven flow and could safely be neglected in other cases. It is observed that the physical properties variation lead to a higher mean velocity in case of pressure assisted flow and a lower mean velocity in case of pressure opposed flow. Furthermore, the... 

Both nonlinear rheology and finite EDL thickness effects on the mixing process in an electroosmotically actuated Y-sensor are being investigated in this paper, utilizing a depthwise averaging method based on the Taylor dispersion theory. The fluid rheological behavior is assumed to obey the power-law viscosity model. Analytical solutions are obtained assuming a large channel width to depth ratio for which a 1-D profile can efficiently describe the velocity distribution. Full numerical simulations are also performed to determine the applicability range of the analytical model, revealing that it is able to provide accurate results for channel aspect ratios of ten and higher and quite... 

Hydrodynamically fully developed flow of power-law fluids under combined action of electroosmotic and pressure gradient forces in rectangular microreactors is analyzed considering heterogeneous catalytic reactions. The Poisson-Boltzmann, Cauchy momentum, and concentration equations are considered in two dimensions and after being dimensionless are numerically solved applying a finite difference algorithm. Variation of axial concentration gradient, and axial and horizontal mass diffusions are taken into account as well. To accomplish a more general analysis, the velocity distribution is obtained by solving continuity and Cauchy momentum equations and is not considered as an average axial... 

The present study, deals with a new mixing technique using a two-phase electrode array, which is charged with alternating current (AC) signals, located in specific parts of the geometry. This significantly contributes to a chaotic mixing mechanism using a low amplitude AC voltage within a micro-channel. Study analysis demonstrates that the optimization of the effective parameters such as geometrical features, voltage amplitude, fluid inlet velocity, AC frequency and phase lag for a defined fluid can lead to an optimum and highly efficient mixer by considerably increasing disturbances in a primary highly ordered laminar flow. Three different geometries of micro mixer are studied; one-ring... 

Smoothed particle hydrodynamics (SPH) was applied to simulate the free falling of cylindrical bodies in three types of fluids including Newtonian, generalized-Newtonian and viscoelastic fluids. Renormalized derivation schemes were used because of their consistency in combination with the latest version of no slip boundary condition to improve the handling of moving fluid-structure interactions (FSIs). Verification of the method was performed through comparing the results of some benchmark examples for both single and two phase flows with the literature. The effects of some parameters such as the viscosity of the Newtonian fluid, the n index of the power-law fluid and the relaxation time of... 

The formation of water drops as a Newtonian fluid and formation of a shear-thinning non-Newtonian fluid, Carboxyl Methyl Cellulose (CMC) from a capillary into different bulk fluids are experimentally investigated. A high speed camera is used to visualize the images of the drops and an image-processing code employed to determine the drop properties from each image. It was found that the properties of the water drops when they are drooped into the liquids bulk fluids such as toluene and n-hexane are almost the same while they differed substantially when they were drooped into the air bulk fluid. It is shown that during the formation of water drop in all three kinds of bulk fluids, the drop... 

The presence of small amount of polymer in Newtonian liquids affects the fluid behavior significantly and creates superficial differences between Newtonian and non-Newtonian drop formation. In the present study, Newtonian and non-Newtonian shear-thinning drop formation in air is examined experimentally and the geometrical parameters, such as drop elongation length, minimum neck diameter and current contact angle are studied for water, glycerin solutions (79, 89 and 94% w/w) and Carboxymethyl cellulose (CMC) solutions (0.5 to 1.5% w/w) drops. The results indicate that at initial stages of the drop growth, Newtonian and non-Newtonian liquids behave similarly. However, at the start of the... 

Using hydrophobic surfaces is one of the efficient methods to preserve energy in fluid transfer systems. However, the studies have been concentrated on Newtonian fluids despite the wide applications of non-Newtonian fluids in daily life and many industries such as the biological, foodstuff, chemical, petroleum, cosmetic, and lab on a chip fields. In this study, we consider power-law fluids as a typical example of non-Newtonian fluids and investigate the effect of hydrophobic microgrooves on the pressure drop in channels by utilizing the phase field method. We demonstrate that the optimum size of the rectangular microgrooves in which the maximum pressure drop reduction (PDR) happens for both... 

In the present research, the rising behavior of air bubble in a viscous liquid is investigated experimentally. Aqueous solutions of glycerol and CMC were used as the Newtonian and shear-thinning non-Newtonian viscous liquids, respectively. The bubble is formed via injection of air by a syringe pump and rises in the quiescent viscous liquid. The process was captured using a high-speed camera (1000 fps) and was post processed to obtain the bubble characteristics such as the center of mass and aspect ratio. The experimental results were verified using the existing literatures and the non-dimensional numbers were reduced to two (Velocity number and Flow number) by lumping the parameters. In... 

This research is a numerical analysis exhaustively investigating two-dimensional (2D) transient convective heat transfer in a differentially heated rectangle, possessing sinusoidal corrugated side walls at constant temperatures. The quadrilateral space is filled with a power-law non-Newtonian fluid, plus the right and left walls are uniformly cooled and heated, respectively. The top and bottom walls are retained as adiabatic and the side walls are recast exploiting sinusoidal corrugated shape. The governing equations of the problem are solved using the finite volume method. The evaluation of fluid flow and heat transfer is conducted in such a manner that the power law index n varies from 0.6... 

Fouling in blood flow is very common and may decrease the blood flow in human body and lead to critical health issues. Upon injury in a blood vessel, the body's defensive system triggers a process to create a blood clot called “Thrombus”, which prevents bleeding. Blood clots are formed by a combination of blood cells, platelets, and fibrins. In this study, we investigate a controlled drug delivery using the magnetic nanoparticles in blood vessels under the influence of magnetic fields. For this purpose the Maxwell and the Navier-Stokes equations for the system are solved. In contrary to the previous studies it is assumed that the blood is a non-Newtonian fluid. The number of particles has...