Sharif Digital Repository

Acrylonitrile (AN) was grafted onto various natural and modified polysaccharides (i.e., gum arabic, gum tragacanth, xanthan gum, sodium alginate, chitosan, sodium carboxymethyl cellulose, hydroxyethyl cellulose, methyl cellulose) by using ceric-carbohydrate redox initiating system. After overcoming practical problems, mainly from the high viscosity of the aqueous solutions of the different substrates, the graft copolymerization reactions were run either in air or in N2 atmosphere under similar conditions. Grafting was confirmed using chemical and spectral (FTIR) proofs. The reactions were kinetically investigated using semi-empirical expressions and time-temperature profiles. An anomalous... 

This review paper is devoted to the intensification of processes for nitrate removal. First, the developments of microfluidic sensors for nitrate detection and analysis have addressed. Second, the process variables of photocatalytic nitrate removal have been categorized according to their relationship with activity, selectivity and stability of the catalyst. The objective of this classification is to generate guidelines toward the photocatalytic process optimization. Third, because of the fact that a single method for nitrate removal faces some challenges, hybrid methods have been presented, and the best choice for nitrate removal can be referred to as photocatalytic – reverse osmosis... 

Acrylonitrile (AN) was grafted onto various natural and modified polysaccharides (i.e., gum arabic, gum tragacanth, xanthan gum, sodium alginate, chitosan, sodium carboxymethyl cellulose, hydroxyethyl cellulose, methyl cellulose) by using ceric-carbohydrate redox initiating system. After overcoming practical problems, mainly from the high viscosity of the aqueous solutions of the different substrates, the graft copolymerization reactions were run either in air or in N2 atmosphere under similar conditions. Grafting was confirmed using chemical and spectral (FTIR) proofs. The reactions were kinetically investigated using semi-empirical expressions and time-temperature profiles. An anomalous... 

A simple and rapid method for simultaneous separation and preconcentration of ultra-trace amounts of nitrate and nitrite using in-syringe liquid microextraction is developed. The extraction procedure is based on the selective ion-pairing complex formation of nitrate and nitrite with Cu(I)-neocuproine in 100 μL of 1-butyl-3-methylimidazolium hexafluorophosphate as an extracting phase within a syringe. The atomic-absorption signal of copper in the ionic liquid layer is proportional to the nitrate and nitrite concentrations. When barbituric acid is used, nitrite is converted into violuric acid and thus it is removed from the environment. In this case, the selectivity of the modified-ligand is... 

Graft copolymerization of methacrylonitrile (MAN) onto carboxymethylcellulose (CMC) was carried out under argon atmosphere in a homogeneous aqueous medium by using ceric ammonium nitrate (CAN) as an initiator. The FTIR spectroscopy and solubility characteristics of the products were used for confirming the graft copolymer formation. The effect of the concentration of the initiator, monomer and polysaccharide as well as the reaction time and temperature on the graft copolymerization reactions were investigated to achieve the optimum grafting conditions (i.e. CAN 0.00065 mol/L, MAN 0.85 mol/L, CMC 1% W/V, reaction temperature 45°C, and reaction time 2 h). According to the empirical rates of... 

Chitin was extracted from shrimp shells and then deacetylated to obtain chitosan. The degree of deacetylation of the chitosan was determined to be 0.76 using pH-metric titration. A large number of cyanide functional groups were introduced onto chitosan by grafting with polyacrylonitrile as an efficient way of modification. The graft copolymerization reactions were carried out under argon atmosphere in a homogeneous aqueous phase (containing a small portion of acetic acid) by using eerie ammonium nitrate as an initiator. Evidence of grafting was obtained by comparing FTIR spectra of chitosan and the graft copolymer as well as solubility characteristics of the products. The synthetic... 

This review paper is devoted to the intensification of processes for nitrate removal. First, the developments of microfluidic sensors for nitrate detection and analysis have addressed. Second, the process variables of photocatalytic nitrate removal have been categorized according to their relationship with activity, selectivity and stability of the catalyst. The objective of this classification is to generate guidelines toward the photocatalytic process optimization. Third, because of the fact that a single method for nitrate removal faces some challenges, hybrid methods have been presented, and the best choice for nitrate removal can be referred to as photocatalytic – reverse osmosis... 

In this study, four types of mixed matrix membranes were fabricated using polysulfone (as the base polymer) and different contents of graphene oxide (GO) nanosheets (as modifier) through wet phase inversion method. Based on the amounts of GO (0, 0.5, 1, and 2 wt%), the synthesized membranes named as M1, M2, M3, and M4, respectively. The membranes characteristics were evaluated using FE-SEM, FT-IR, and water contact angle measurements. In addition, the performance of the prepared membranes was investigated in terms of basic parameters: filtrate water flux, nitrate removal efficiency, and antifouling properties. Results showed significant improvements of the characteristics of modified... 

In this study, four types of mixed matrix membranes were fabricated using polysulfone (as the base polymer) and different contents of graphene oxide (GO) nanosheets (as modifier) through wet phase inversion method. Based on the amounts of GO (0, 0.5, 1, and 2 wt%), the synthesized membranes named as M1, M2, M3, and M4, respectively. The membranes characteristics were evaluated using FE-SEM, FT-IR, and water contact angle measurements. In addition, the performance of the prepared membranes was investigated in terms of basic parameters: filtrate water flux, nitrate removal efficiency, and antifouling properties. Results showed significant improvements of the characteristics of modified... 

Originally, the application of nano zero valent iron/nickel (nZVI/Ni) particles for nitrate removal in porous media was studied. nZVI/Ni was prepared and employed in batch and continuous modes. Based on batch experiments, the reaction kinetics was consistent with the adsorption model by the order of 1-1.5. The variation of the kinetics order depends on pH and nickel content. So that highest reactivity was observed for nZVI with 10% of Ni at pH ≤ 3. Nitrate remediation in a continuous system was mostly influenced by seepage velocity, quantity and freshness of nZVI/Ni and particle size of porous media. In a batch mode, the maximum nitrate removal was 99% while in a continuous mode it did not... 

Nano-sized particles of manganese oxides have been prepared by a very simple and cheap process using a decomposing aqueous solution of manganese nitrate at 100 °C. Scanning electron microscopy, transmission electron microscopy and X-ray diffraction spectrometry have been used to characterize the phase and the morphology of the manganese oxide. The nano-sized manganese oxide shows efficient catalytic activity toward water oxidation and the epoxidation of olefins in the presence of cerium(iv) ammonium nitrate and hydrogen peroxide, respectively  

A soil microbial fuel cell was investigated that uses soil and groundwater to generate electricity. The cathode surface area and materials are always important for increasing power. Power density was shown to be a linear function of cathode surface area. Biofilm formation on the graphite cathode was observed to be helpful in enhancing power output and maximum performance reached 89.2 mW/m2. As an application for the insertion-type soil microbial fuel cell, nitrate removing was investigated in cathode. Nitrate was reduced in an aerobic cathode at the rate of 37.5 mg nitrate/lit/day and 55 mg nitrate/lit/day in anaerobic cathode  

In this study, solvent extraction method has been utilized for separation of molybdenum and vanadium from nitrate solution by utilizing coupling of acid and solvating extractants (D2EHPA and TBP extractants). The outcomes demonstrated that synergistic solvent extraction improves stability of formatted complexes for transfer to the organic phase. The main parameters such as pH value, concentration of extractants, NH4OH concentration as the stripping agent and contact time were optimized at 0.4, 15% (v/v) D2EHPA, 10% (v/v) TBP, 2 M and 30 min, respectively. The maximum separation factor of 24.84 was obtained with a new synergistic mixture of D2EHPA and TBP diluted with kerosene. According to... 

The present study shows the approach developed and employed to wastewater treatment utilizing the vermifiltration technique in a region with a population of approx. 280 people. The domestic sewage from the residential area accumulated in the septic tank was fed into the system designed based on the combination of the sand filter and the vermifilter with the optimum loading rate of 2m2 per day for 45 days. The pH, electrical conductivity, chemical oxygen demand, turbidity and nitrate concentration of wastewater were measured before and after vermitreatment for the mentioned period. The results demonstrated that the unique combination of the vermifiltration system with the sand filter was able... 

In this study, the effect of mixotrophic, heterotrophic, photoautotrophic (CO2 of air source), and photoautotrophic (bicarbonate source) cultivation of Chlorella vulgaris was investigated on microalgae growth rate and nutrient removal under different kinds of nitrogen sources. The highest N–NH3 +, N–NO3 −, P–PO4 3− (in ammonium source), and P–PO4 3− (in nitrate source) removal efficiency (87.28 ± 0.89, 70.00 ± 1.20, 87.00 ± 3.10, and 78.10 ± 1.95%, respectively) was reached in the mixotrophic culture. In all cultivations, when nitrate was used as the nitrogen source, specific growth rate, biomass productivity, and specific oxygen production rate (SOPR) were higher than the one with ammonium... 

The aim of this research is the study of hexyltriphenylphosphonium bromide (HTPB) ionic liquid as a bifunctional promoter (solvent and catalyst) in the presence of cerium(IV) ammonium nitrate as a single electron oxidant for the Michael reaction at room temperature and solvent-free conditions. A novel, one-pot and environmentally benign the process to achieve the chemoselective of 2-(3-oxo-1,3-diarylpropyl)malononitrile derivatives instead of 2-(1,3-diarylallylidene)malononitriles using a three-component reaction involving acetophenone derivatives, various aromatic aldehydes and malononitrile was developed. This protocol is simple and provides biologically interesting products in good... 

The aim of this research is the study of hexyltriphenylphosphonium bromide (HTPB) ionic liquid as a bifunctional promoter (solvent and catalyst) in the presence of cerium(IV) ammonium nitrate as a single electron oxidant for the Michael reaction at room temperature and solvent-free conditions. A novel, one-pot and environmentally benign the process to achieve the chemoselective of 2-(3-oxo-1,3-diarylpropyl)malononitrile derivatives instead of 2-(1,3-diarylallylidene)malononitriles using a three-component reaction involving acetophenone derivatives, various aromatic aldehydes and malononitrile was developed. This protocol is simple and provides biologically interesting products in good... 

Groundwater vulnerability assessment of urban areas is a challenging task in the fast trend of urbanization around the globe. This study introduces a new approach for modifying well-known parameters of common vulnerability indexes to adjust them for urban areas. The approach is independent of a specific weighting system. The aquifer of Mashhad city, contaminated by domestic wastewater, is selected as a case in this study. In order to evaluate the aquifer vulnerability due to anthropogenic activities, at first, parameters of depth to groundwater, recharge, land use, and soil are modified based on their basic concepts and their influences on contamination attenuation. Then, the modified... 

The aim of this study is to develop a new fuzzy optimization model to find the optimal factor weights of modified DRASTIC index for groundwater vulnerability mapping an urban aquifer to nitrate contamination. Eight factors including water table depth, recharge, aquifer media, soil media, topography, impact of vadose zone, hydraulic conductivity, and land use are considered and rated. A fuzzy linear regression is formulated between the values of eight factors and corresponding nitrate concentration in groundwater. An optimization model based on real code genetic algorithm with objective of minimizing the sum of the fuzzy spread of the regression coefficients is implemented. Aquifer of Mashhad...