Sharif Digital Repository

This paper describes the photoluminescence study of titanium dioxide (TiO2) nanorods grown by a hydrothermal synthesis method on the surface of fluorine doped tin oxide (FTO) coated glass. The effects of growth conditions including: reaction time, precursor concentration and adding NaCl to hydrothermal solution on the structural and optical properties of productions are examined by using SEM, XRD, TEM and room temperature photoluminescence measurements. Also, the performance of the TiO2 nanorods as a photoanode of dye sensitized solar cells is investigated. The different excitation energies and intensities are chosen to verify the discrete electronic state of radiative recombination centers... 

Copper nanorods have been synthesized by electrodeposition with different lengths in porous polycarbonate (PCT) membranes with a pore diameter of 50nm and a thickness of 4νm. The PCT membranes were dissolved in dichloromethane (CH2Cl2) and the solvent was replaced by methanol solutions. Extinction peaks at 587, 581 and 574nm were observed for the Cu nanorods with aspect ratio R = 6,8 and 10 in methanol, respectively. Polarization of the molecules of the medium around the wires changes the dielectric constant of the medium. Hence, the wavelength of the extinction peaks does not shows good agreement with calculations that were done on basis of Gans' theory with nominal dielectric constant of... 

In the present study, the effect of nanosized graphene oxide layer on thermal stability and biocompatibility of gold nanorods has been examined. The graphene oxide-wrapped gold nanorods were prepared by electrostatic interaction between negatively charged graphene oxide and positively charged nanorods. The resulting nanohybrids were then heated at different time intervals to 95 °C in a water bath to assess the effect of heat on the rods morphology. The structural changes in gold nanorods were monitored via UV-Vis spectroscopy measurements and transmission electron microscopy images. In similar experiments, the graphene oxide used to wrap gold nanorods was reduced by ascorbic acid in a 95 °C... 

In the present study, the effect of nanosized graphene oxide layer on thermal stability and biocompatibility of gold nanorods has been examined. The graphene oxide-wrapped gold nanorods were prepared by electrostatic interaction between negatively charged graphene oxide and positively charged nanorods. The resulting nanohybrids were then heated at different time intervals to 95 °C in a water bath to assess the effect of heat on the rods morphology. The structural changes in gold nanorods were monitored via UV-Vis spectroscopy measurements and transmission electron microscopy images. In similar experiments, the graphene oxide used to wrap gold nanorods was reduced by ascorbic acid in a 95 °C... 

ZnO Nanorods (NRs) are deposited on glass substrate using the hydrothermal method by applying a strategic growth control to improve their aspect ratios. In this research, the aspect ratio was tuned by tailoring the synthesis parameters, including the seed layer annealing temperature, absence/presence of polyethylenimine (PEI) in the growth solution, and the solution preheating process. The effects of these parameters on the morphology, crystal structure, room temperature photoluminescence properties, and current-voltage characteristics were examined by FESEM, XRD, PL, and I-V measurements. It was demonstrated that by varying the seed layer annealing temperature and presence of PEI solution... 

A kinetic model for growth of ZnO nanorods via vapor-liquid-solid (VLS) mechanism based on the bulk diffusion of Zn atoms through the Au-Zn droplet is presented. The dependences of the growth rate on size are given quantitatively. A general expression for the growth rate of nanorods during VLS process is derived. The derived formula shows the dependences of growth rate on lateral size of nanorods, concentration and supersaturation of Zn atoms in the liquid droplet. Based on the presented kinetic model the smaller nanorods have faster growth rate. Au-catalyzed ZnO nanorods are grown by chemical vapor transport and condensation (CVTC) process experimentally. Theoretical and experimental... 

The potential of hydrogen (pH) is a basic and critical parameter representing the function of numerous chemicals/biomolecules. Due to the widespread applications of pH in diverse fields, the development of rapid and simple yet reliable probes for the determination of pH has attracted significant interest. In this paper, by using AuNRs, silver ions, and ascorbic acid as colorimetric pH sensor, a multicolorimetric nanosensor is described for pH measurement. The reduction of silver ions by ascorbic acid which is strongly influenced by pH, results in silver nanoshell deposition on the surface of AuNRs. Consequently, the formation of Au@Ag core-shell NRs causes a series of blue shifts in the... 

We present a novel hybrid electrode based on reduced graphene oxide/nickel/zinc oxide heterostructures. The sensor was fabricated by template-free hydrothermal growth of ZnO nanorod arrays on conductive glass substrates (FTO) followed by conformal electrodeposition of nickel nanoparticles with an average size of 18 nm. Then, in-situ reduction and electrophoretic deposition of graphene oxide (GO) nanosheets on the structured ZnO/Ni electrode was performed. The prepared three-dimensional nanostructure exhibited fast electrocatalytic response (<3 s) towards glucose oxidation due to the large surface area and high electro-activity. The prepared biosensor possessed a wide linear range over... 

Pursuing a sensing structure with a large effective surface area, partial ordered arrays of ZnO nanorods with flower-like structures are introduced for gas sensing applications. Room temperature H2S response of the grown structure shows significant enhancement after modification with Au nanoparticles. High response (about 1270 at 6 ppm H2S gas) and selectivity were achieved by depositing an Au layer with nominal thickness ∼6 nm. X-ray photoelectron spectroscopy (XPS) was utilized to describe the H2S sensing mechanism  

The paper presents graphene-templated self-assembly of gold nanorods into long fibers with controllable optical properties. It is shown that the size of self-assembled nanostructures varies with time and is controlled by chemical reactions between amine groups of graphene and the functional groups of gold. The absorption peak of the nanostructures changes over time while the photoluminescence intensity is quenched. The self-assembled nanostructures with variable plasmon resonance effects are potentially usable for the fabrication of nanoscale devices for biomedical applications. © 2018 Elsevier B.V  

Metamaterials are manmade structures that have attained considerable attention over the past 2 decades in the modern fields like cloaking, sensing, and imaging owing to their ability to harness electromagnetic fields. In this regard, we have inspected the dielectric properties of the hyperbolic metamaterials (HMM) made of metallic nanorods and dielectric medium at the infrared wavelength regime. The periodically arranged subwavelength-sized metallic nanorods embedded in the silicon dioxide (SiO 2) substrate glass. The spacing between two adjacent nanorods is of subwavelength in size. Furthermore, effective permittivity of the metamaterial has been analyzed by employing the Maxwell Garnett...