Sharif Digital Repository

Due to the important role of surface-related properties of NPs in their biological behavior, simple and fast methods that could precisely demonstrate accurate information about NPs' surface, structure and morphology are highly desirable. In this study a set of surface morphological nano-descriptors (size, shape, surface area, agglomeration state, curvature, corner count and aspect ratio) have been defined and extracted from Transmission Electron Microscopy (TEM) images of nanoparticles (NPs) by Digital Image Processing methods. The extracted data represent a thorough description of the surface and morphologies of NPs lying beyond their TEM images and can supply the data required for a... 

Nanoparticles (NPs) are increasingly being used in different branches of science and in industrial applications; however, their rapid detection and characterization at low concentration levels have remained a challenge; more specifically, there is no single technique that can characterize the physicochemical properties of NPs (e.g. composition and size). In this work we have developed a colorimetric sensor array for defining the physicochemical properties of NPs in aqueous solution with ultra-low concentrations (e.g. 10-7g ml-1 for gold NPs). Various NPs were readily identified using a standard chemometric approach (i.e. hierarchical clustering analysis), with no misclassifications over 400... 

As in many other methods that have integrated nanoparticles (NPs), the chemical nose/tongue strategy has also progressed greatly since the entrance of NPs into this field. The fascinating tunable physicochemical properties of NPs have made them powerful candidates for array-based sensing platforms and have enabled the development of real-time, sensitive and portable systems that are able to target complex mixtures of analytes. In particular, the unique optical properties of NPs have a key role in providing promising array-based sensing approaches. This review will describe the main aspects and processes of most common NP-based optical sensor arrays. The fundamental steps in the design of a... 

Once in biological fluids, the surface of nanoparticles (NPs) is rapidly covered with a layer of biomolecules (i.e., the "protein corona") whose composition strongly determines their biological identity, regulates interactions with biological entities including cells and the immune system, and consequently directs the biological fate and pharmacokinetics of nanoparticles. We recently introduced the concept of a "personalized protein corona" which refers to the formation of different biological identities of the exact same type of NP after being exposed to extract plasmas from individuals who have various types of diseases. As different diseases have distinct metabolomic profiles and... 

Graphene nanogrids (crossed graphene nanoribbons synthesized by the oxidative unzipping of multi-walled carbon nanotubes) on a SiO2 matrix containing TiO2 nanoparticles (NPs) were applied as a photocatalytic stimulator in the accelerated differentiation of human neural stem cells (hNSCs) into two-dimensional neural networks. The hydrophilic graphene nanogrids exhibited patterned proliferations of hNSCs (consistent with patterns of the nanogrids), in contrast with the usual random growths occurring on quartz substrates. The number of cell nuclei differentiated on reduced graphene oxide nanoribbon (rGONR) grid/TiO2 NPs/SiO2 increased ∼5.9 and 26.8 fold compared to the number of cells on quartz... 

Finesmigration is a noticeable problem in petroleum-production engineering. Plugging of throats in porous media occurs because of detachment of fine particles from sand surfaces. Thus, the study of interactions between fines and pore surfaces and the investigation of governing forces are important factors to consider when describing the mechanism of the fines-release process. The main types of these forces are electric double-layer repulsion (DLR) and London-van der Waals attraction (LVA). It may be possible to alter these forces with nanoparticles (NPs) as surface coatings. In comparison with repulsion forces, NPs increase the effect of attraction forces. In this paper, we present new... 

Liposomes are known to be promising nanoparticles (NPs) for drug delivery applications. Among different types of self-assembled NPs, liposomes stand out for their non-toxic nature, and their possession of dual hydrophilic-hydrophobic domains. Advantages of liposomes include the ability to solubilize hydrophobic drugs, the ability to incorporate different hydrophilic and lipophilic drugs at the same time, lessening the exposure of host organs to potentially toxic drugs and allowing modification of the surface by a variety of different chemical groups. This modification of the surface, or of the individual constituents, may be used to achieve two important goals. Firstly, ligands for active... 

Nowadays, nanoparticles (NPs) are used in a variety of biomedical applications including brain disease diagnostics and subsequent treatments. Among the various types of NPs, magnetic nanoparticles (MNPs) have been implemented by many research groups for an array of life science applications. In this paper, we studied MNPs controlled delivery into the endothelial cells using a magnetic field. Dynamics equations of MNPs were defined in the continuous domain using control theory methods and were applied to crossing the cell membrane. This study, dedicated to clinical and biomedical research applications, offers a guideline for the generation of a magnetic field required for the delivery of... 

Liposomes are known to be promising nanoparticles (NPs) for drug delivery applications. Among the different types of self-assembled NPs, liposomes stand out for their non-toxic nature and their possession of dual hydrophilic-hydrophobic domains. The advantages of liposomes include the ability to solubilize hydrophobic drugs, the ability to incorporate different hydrophilic and lipophilic drugs at the same time, lessening the exposure of host organs to potentially toxic drugs and allowing modification of the surface by a variety of different chemical groups. This modification of the surface, or of the individual constituents, may be used to achieve two important goals. First, ligands for... 

This study, for the first time, reports the synthesis of CuO- and Cu2O nanoparticles (NPs) using the Salvia hispanica extract by a high-gravity technique. The original green synthesis procedure led to the formation of nanoparticles with promising catalytic and biological properties. The synthesized nanoparticles were fully characterized and their catalytic activity was evaluated through a typical Azide-Alkyne Cycloaddition (AAC) reaction. The potential antibacterial activity against gram positive (S. aureus) and gram negative (E. coli) bacteria were investigated. It was shown that the antibacterial properties were independent of the NP morphology as well as of the texture of the synthesis... 

We investigate the use of simple nontoxic Cu2SnS3 (CTS) nanoparticles (NPs) as low-cost dopant-free hole-transport materials (HTMs) a substitute for spiro-OMeTAD in an n-i-p mesoscopic architecture of perovskite solar cells (PSCs). Besides, this work confirms the critical role of the crystalline phase of CTS NPs on the performance of the device. Using a facile one-pot heating-up procedure, pure zincblende and wurtzite structures of CTS NPs were obtained by sulfur element and thiourea as the sulfur source, respectively, and were dispersed in chloroform to make very stable nonpolar ink that is compatible with the perovskite. Nanoparticles with the wurtzite crystal phase showed much better... 

Due to their ultra-small size, nanoparticles (NPs) have distinct properties compared with the bulk form of the same materials. These properties are rapidly revolutionizing many areas of medicine and technology. NPs are recognized as promising and powerful tools to fight against the human brain diseases such as multiple sclerosis or Alzheimer's disease. In this review, after an introductory part on the nature of protein fibrillation and the existing approaches for its investigations, the effects of NPs on the fibrillation process have been considered. More specifically, the role of biophysicochemical properties of NPs, which define their affinity for protein monomers, unfolded monomers,... 

Protein fibrillation process (e.g., from amyloid beta (Aβ) and α-synuclein) is the main cause of several catastrophic neurodegenerative diseases such as Alzheimer's and Parkinson diseases. During the past few decades, nanoparticles (NPs) were recognized as one of the most promising tools for inhibiting the progress of the disease by controlling the fibrillation kinetic process; for instance, gold NPs have a strong capability to inhibit Aβ fibrillations. It is now well understood that a layer of biomolecules would cover the surface of NPs (so called "protein corona") upon the interaction of NPs with protein sources. Due to the fact that the biological species (e.g., cells and amyloidal... 

The most important issue during synthesis of nanoparticles (NPs) is to avoid particle agglomeration and adhesion. There have been several attempts to use special substances such as organic surfactants, polymers and stable ligands for this purpose. In this study, silver NPs were synthesised with and without gelatin macromolecules, as a green natural biopolymer, which resulted in NPs with varying shapes and sizes. The effect of morphological characteristics on the antibacterial and antifungal properties of the synthesised NPs were studied, by comparing Gram-negative (Escherichia coli) versus Gram-positive (Staphylococcus aureus) bacteria as well as fungi (Candida albicans) by calculation of... 

Different compositions of TiO2–BaTiO3 nanocomposites are synthesized with various weight ratios for dye-sensitized solar cell (DSSC) applications. TiO2 and BaTiO3 nanoparticles (NPs) are synthesized by sol-gel and solvothermal methods, respectively and are employed as the photoanode electrodes. BaTiO3 NPs have pure cubic perovskite crystal structure with an average size of 20-40 nm, while TiO2 NPs show pure anatase phase with 15-30 nm size. The power conversion efficiency (PCE) enhancement of the cells is first attained by controlling the thickness of the films for light harvesting improvement. The fabricated DSSC composed of pure BaTiO3 NPs with an optimal thickness of 25 μm shows... 

Nowadays, nanoparticles (NPs) are used in a variety of biomedical applications including brain disease diagnostics and subsequent treatments. Among the various types of NPs, magnetic nanoparticles (MNPs) have been implemented by many research groups for an array of life science applications. In this paper, we studied MNPs controlled delivery into the endothelial cells using a magnetic field. Dynamics equations of MNPs were defined in the continuous domain using control theory methods and were applied to crossing the cell membrane. This study, dedicated to clinical and biomedical research applications, offers a guideline for the generation of a magnetic field required for the delivery of... 

This paper presents a compact and cost effective method for on-chip separation of silica-coated magnetic nanoparticles (SMNPs) with different hydrodynamic size. Three types of SMNPs (Fe3O4@SiO2) with the same magnetic core but with different thickness of silica shells were successfully separated using the developed microfluidic platform. The innovative aspect of the presented separation method is that the induced velocity on the three different types of SMNPs while imposed to the same magnetic field gradient in a static fluid is inversely proportional to their overall, non-magnetic volume. This is due to the enhanced Stokes’ drag force exerted on the nanoparticles (NPs) resulting from their... 

Nanotechnology is gaining more attention in biotechnological applications as a research area with a huge potential. Nanoparticles (NPs)can influence the rate of anaerobic digestion (AD)as the nano-sized structures, with specific physicochemical properties, interact with substrate and microorganisms. The present work has classified the various types of additives used to improve the AD processes. Nanomaterials as new additives in AD process are classified into four categories: Zero-valent metallic NPs, Metal oxide NPs, Carbon based nanomaterials, and Multi-compound NPs. In the following, application of nanomaterials in AD process is reviewed and negative and positive effects of these materials... 

As a low-cost method, hydrophilic SiO2 nanoparticles (NPs) and fluid catalytic cracking (FCC) coarse particles were used as assistant materials to improve the fluidity of Al2O3 and TiO2 hard-to-fluidize nanopowders. To decrease the strong electrostatic forces between the hydrophilic nanopowders, prepared samples were fluidized in the presence of methanol vapor. Results revealed that the amount of SiO2 NPs, increased from 5 to 50 wt. %, has a beneficial effect on the fluidization quality of the binary (hard-to-fluidize NPs + SiO2) and ternary (hard-to-fluidize NPs + SiO2 + FCC) mixtures. However, the amount of FCC particles when it varied from 15 to 30 wt. % in the ternary mixtures should... 

Co-precipitation of CoCl2.6H2O with graphene oxide (GO) and heating at 400°C for 4 h under hydrogen resulted in the construction of cobalt/ reduced GO (Co/rGO) nanocomposite utilisable in magnetic thermal therapy. Field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, vibrating sample magnetometry, thermogravimetric analysis/derivative thermogravimetry, and X-ray diffraction methods characterised the samples. Time-temperature curves of the samples containing 30, 50, 70, and 100 µg ml−1 Co/rGO nanoparticles (NPs) suspended in phosphate-buffered saline were determined at different specific heating rates. Magnetic-field response of...