Sharif Digital Repository

The paper investigates the influences of fluid flow on static and dynamic behaviours of electrostatically actuated carbon nanotubes (CNTs) using strain gradient theory. This nonclassical elasticity theory is applied in order to obtain more accurate results possessing higher agreement with the experimental data. The effects of various fluid parameters such as the fluid viscosity, velocity, mass and temperature on the pull-in properties of the CNTs with two cantilever and doubly clamped boundary conditions are studied. The results reveal the applicability of the proposed nano-system as nano-valves or nano-fluidic sensors  

Since oil reservoirs are limited and energy demand is increasing, seeking for high efficient EOR processes or enhancing the efficiency of current proposed EOR methods for producing trapped oil from reservoirs are highly investigated. As a way out, it is possible to couple the EOR and nanotechnology to utilize the efficiency of both methods together. Regarding this possibility, in the present study, in the first stage of investigation stable and uniform water-based solution of nano-sized particles of copper oxide with different concentrations (0.01–0.05 M) were prepared and then injected into the core samples. In the first stage, the effects of different surfactants with respect to their... 

In this work, a four-turn Pulsating Heat Pipe (PHP) is fabricated and tested experimentally. The novelty of the present PHP is the capability of obtaining various thermal performances at a specific heat input by changing the magnetic field. The effects of working fluid (water and ferrofluid), charging ratio (25%, 40%, and 55%), heat input (25, 35, 45, 55, 65, 75, and 85 W), orientation (vertical and horizontal heat mode), and magnetic field on the thermal performance of PHPs are investigated. The results showed that applying the magnetic field on the water based ferrofluid reduced the thermal resistance of PHP by a factor of 40.5% and 38.3% in comparison with the pure water case for the... 

The present study tries to use the methanol-silver nanofluid filled thermosyphon heat exchanger and compares the effectiveness as well as energy saving with pure methanol. Experimental results show that using methanol-silver nanofluid, leads to energy saving around 8.8-31.5% for cooling and 18-100% for reheating the supply air stream in an air conditioning system  

Effect of using Al 2O 3-water nanofluids with different volume fractions and particle diameters on generated entropy, hydrodynamic performance and heat transfer characteristics of a tangential micro-heat sink (TMHS) was numerically investigated in this research. Results indicated that considerable heat transfer enhancement is possible when using Al 2O 3-water nanofluids as coolant and clearly the enhancement improves with increasing particles concentration and decreasing particles size. However, using nanofluid has also induced drastic effects on the pumping power that increases with particles volume fraction and Reynolds number. Finally, it was found that generated total entropy decreases... 

In this article, mixed-convective heat transfer of nanofluids in a vertical channel partially filled with highly porous medium was studied. In the porous region, the Brinkman-Forchheimer extended Darcy model was used to describe the fluid flow pattern. Different viscous dissipation models were also applied to account for viscous heating. At the porous medium-fluid interface, interfacial coupling conditions for the fluid velocity and temperature were used to derive the analytical solution using a two-parameter perturbation method. The model used for the nanofluids incorporates the effects of Brownian motion and thermophoresis. With constant wall temperature, velocity and temperature profiles... 

In this work, a four-turn pulsating heat pipe (PHP) is fabricated and tested experimentally. The novelty of the present PHP is the capability to obtain various thermal performances at a specific heat input by changing the magnetic field. The effects of working fluid (water and ferrofluid), charging ratio (40% and 70%), heat input (35, 45, 55, 65, 75, and 85 W), orientation (horizontal and vertical heat mode), ferrofluid volumetric concentration (2.5% and 7%), and magnetic field on the thermal performance of PHPs are investigated. The results showed that applying the magnetic field on the water-based ferrofluid reduced the thermal resistance of PHP in all orientations. In the presence of a... 

In this article, the problem of combined forced and natural convection in a vertical porous channel for both regular fluids and nanofluids has been solved by perturbation and numerical methods, taking into account the influences of viscous heating and inertial force. In this regard, various types of viscous dissipation models, including the Darcy model, the power of drag force model, and the clear fluid compatible model, were considered to account for viscous heating. In addition, the mass flux of nanoparticles was also considered in terms of Brownian and thermophoresis mechanisms. The velocity and temperature distributions of both the regular fluid and nanofluid and the Nusselt number... 

Nanofluid is the term applied to a suspension of solid, nanometer-sized particles in conventional fluids; the most prominent features of such fluids include enhanced heat characteristics, such as convective heat transfer coefficient, in comparison to the base fluid without considerable alterations in physical and chemical properties. In this study, nanofluids of aluminum oxide and copper oxide were prepared in ethylene glycol separately. The effect of forced convective heat transfer coefficient in turbulent flow was calculated using a double pipe and plate heat exchangers. Furthermore, we calculated the forced convective heat transfer coefficient of the nanofluids using theoretical... 

Forced convective of a nanofluid that consists of water and Al2O3 in horizontal tubes has been studied numerically. Computed results were validated with existing well established correlation. Two-phase Eulerian model has been implemented for the first time to study such a flow field. A single-phase model and two-phase mixture model formulations were also used for comparison. The comparison of calculated results with experimental values shows that the mixture model is more precise. It is illustrated that the single-phase model and the two-phase Eulerian model underestimates the Nusselt number. Effects of nanoparticles concentration on the thermal parameters are also discussed  

Pulsating Heat Pipes (PHPs) are cooling devices that are compact in size and have an ability to transfer heat in low temperature differences. Working fluids strongly affect the thermal performance of PHPs. In this paper, effects of some thermophysical parameters relating to working fluids, such as boiling point, latent heat of vaporization, surface tension, thermal conductivity and dynamic viscosity, are presented based on experimental and numerical studies done in recent years. Addition of nanoparticles to fluids, or making nanofuild, is a new method of improving thermophysical properties of fluids. Recently, many studies are carried out on thermophysical properties of nano-fuild. Results... 

A new characteristic-based method is developed and used for solving the mixed and forced convection problems. The nano-fluid flow with heat transfer is simulated with a novel characteristic-based scheme in closed domains with different aspect ratios. For this purpose, a FORTRAN code has been written and developed. Water as a pure fluid and water-titanium dioxide as a nano-fluid were considered. The governing equations are solved by the finite volume utilizing a characteristic-based scheme for the convective fluxes. The simulation is done at Grashof numbers from 100 to 104, Reynolds numbers from 100 to 1000, and volume fractions of nano-particles from 0% to 10%. Streamlines, isotherms,... 

By reducing the exploration of new oil reservoirs, enhanced oil recovery from previous oil reservoirs is a solution to supply energy demand. In order to develop the production, various technologies and methods have been proposed such as steaming, direct heating, flooding by nano-fluid, chemical injection, polymer injection and etc. In the present study, nanofluid flooding has been attempted on a rock reservoir with incomplete cone geometry and its performance has been evaluated on oil recovery. The porous media is considered heterogeneous in simulation in accordance with oil reservoirs. The heterogeneous geometry considered in this study is incomplete cone that is heterogeneous in a random... 

In this study, silicon microchannel heat sink (MCHS) performance using nanofluids as coolants was analyzed. The nanofluid was a mixture of nanoscale Cu particles and pure water with various volume fractions. Based on theoretical models and experimental correlations, the heat transfer and friction coefficients required in the analysis were used. In the theoretical model, nanofluid was treated as a single-phase fluid. In the experimental correlation, thermal dispersion due to particle random motion was included. The microchannel heat sink performances for a specific geometries with Wch = W fin = 100 μm and Lch =300 μm is examined. In this study, flow in laminar and turbulent regimes using the...