Sharif Digital Repository

In this study, polypropylene/clay nanocomposites were prepared by melt blending method and their thermal conductivity and the thermal conductivity of polypropylene/multi-wall carbon nanotube (MWCNT) nanocomposites were investigated and modeled. It is found that the thermal conductivity of the PP/Clay and PP/MWCNT nanocomposites is increased with increasing temperature. The thermal conductivity of the nanocomposites is improved due to incorporation of nanoclay and MWCNT compared with pure PP matrix  

Polystyrene/organoclay nanocomposites were prepared by melt intercalation method in this research. Morphology, tensile and impact properties and deformation mechanism of the samples were studied. To study the structure of nanocomposites, X-ray diffraction and transmission electron microscopy techniques are utilized. The deformation mechanisms of different samples were examined via reflected and transmitted optical microscopy. The results reveal that incorporation of organoclay affects structure, mechanical properties and deformation mechanism of nanocomposite. Introduction of organoclay can facilitate initiation and growth of crazing mechanism in polystyrene at both conditions of loadings,... 

High chemical resistance is the main prerequisites for materials that are intended to be utilized in usages such as chemicals storage containers production. Nanocomposites of epoxy resin containing nanoclay, CaCO3 and TiO2 nanoparticles were prepared and their chemical resistance was studied. Moreover, the effect of electron beam irradiation was explored. TEM micrographs proved the dispersion of nano-size particles in the polymeric matrix. XRD patterns showed an exfoliated structure for nanocomposite containing 1 % nanoclay and intercalated structures for nanocomposites with higher nanoclay contents. SEM showed the pits that appeared in epoxy/nanoclay structure due to chemical corrosion.... 

X-ray diffraction and rheological measurements were used to characterize nanoparticle dispersion in LDPE/LLDPE/nanoclay hybrid nanocomposites. XRD patterns were interpreted with a novel distribution formula and rheological measurements were used to confirm the results. Results of these two methods indicated that increasing clay in all the prepared nanocomposites exhibited a significant improvement in filler-matrix interaction because of increasing the probability of polymer diffusion but further exfoliation need more compatibilizing situations. It seems that this mathematical method could be used for predicting the overall change in clay gallery d-spacing and the extent of... 

Polypropylene matrix nanocomposites reinforced with organoclay are investigated and their ability to replace some polyamide automotive parts is evaluated. This is so interesting from industrial point of view because of cost saving and ease of processing and recycling. This work is focused on different nanocomposite systems which are PP/nanoclay, and PP/PA/nanoclay. Also the effect of compatibilizer is presented here. Structure of these systems are studied by using WAXD, TEM and SEM. Mechanical properties of specimens are studied using uniaxial tensile test. As it will be demonstrated, nanoclay sheets tend to disperse in PA particles. On the other hand, introducing nanoclay into PP/PA blends... 

Poly (vinylidene fluoride) (PVDF) nanocomposites were prepared via melt, solution, and co-precipitation mixing methods using Cloisite 30B as organoclay. The results from X-ray diffraction patterns display intercalation or exfoliation of nanoclay depending on the nanocomposite preparation method. The solvent cast and co-precipitated samples showed exfoliation, while intercalation was observed in the nanocomposites prepared by melt mixing. Introducing organoclay induced formation of β-crystals in the PVDF nanocomposites as evidenced by XRD and FT-IR. FT-IR analysis indicated that the samples prepared by the co-precipitation method had a higher tendency for β phase formation, while the sample... 

In this study organically modified nanoclay were prepared by exchanging of the cetyltrimethylammonium (CTAB), with inorganic/metal ions/cations in montmorillonite structure. To investigate the influence of the amount of modifier on basal spacing and subsequent removal efficiency of hydrocarbon, different amount of modifier was used. The modified and unmodified nanoclays characterized by XRD, CHN and FTIR techniques. The X-ray diffraction results showed that the interlayer spacing of CTAB-modified clays increased from 12 to 22Å. The effectiveness of the sorbent materials for sorption of a range of products was investigated using crude oil, kerosene, gasoline and toluene. The process... 

This work deals with the preparation of epoxy-clay nanocomposites. The results show that the mechanical properties of nanocomposites depend on their compatibility, the epoxy resin used and the purity of the nanoclay. The used bentonite was purified and the effects of the organoclay synthesis and various additives on its characteristics were evaluated. X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Scanning Electron Microscopy (SEM) were used to analyze the microstructure and the phase composition of the nanoclay. The XRD results revealed that when the modifier addition was increased from 10wt.% to 40 wt.%, the interlayer spacing of the nanoclay increased from 12.43 Å being... 

Despite the promise of hydrogel-based stem cell therapies in orthopedics, a significant need still exists for the development of injectable microenvironments capable of utilizing the regenerative potential of donor cells. Indeed, the quest for biomaterials that can direct stem cells into bone without the need of external factors has been the "Holy Grail" in orthopedic stem cell therapy for decades. To address this challenge, we have utilized a combinatorial approach to screen over 63 nanoengineered hydrogels made from alginate, hyaluronic acid, and two-dimensional nanoclays. Out of these combinations, we have identified a biomaterial that can promote osteogenesis in the absence of... 

The objective of this study was to investigate the effects of two compatibilizers, namely maleated polypropylene (PP-g-MA) and maleic anhydride grafted poly (ethylene-co-octene) (EOC-g-MA), on the morphology and thus properties of ternary nanocomposites of polypropylene (PP)/ethylene-octene copolymer (EOC)/clay nanocomposite. In this regard the nanocomposites and their neat polymer blend counterparts were processed twice using a twin screw extruder. X-ray diffraction, transmission electron microscopy, Energy dispersive X-ray spectroscopy, and scanning electron microscopy were utilized to characterize nanostructure and microstructure besides mechanical and rheological behaviors of the... 

Despite various applications of hydrogels, they have poor gel strength and low resistance against crack propagation which lead to the limitation of their applications. For overcoming this inherent weakness, the current study has focused on the simultaneous utilization of interpenetrating polymer network (IPN) structure and nanocomposite hydrogels. It is known that IPN and nanocomposite gels can improve gel strength. The combination of IPN and nanocomposite structure was developed in hydrogels for improving gel strength. For this purpose, bentonite was successfully modified with a cationic surfactant, (3-methacrylamidopropyl) trimethyl ammonium chloride (MAPTAC), as intercalate, and... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

Inclusion of nano-clays into hydrogels is an efficient approach to produce nanocomposite hydrogels. The introduction of nano-clay into hydrogels causes an increase in water absorbency. In the present work, Nanocomposite hydro-gels based on kappa-carrageenan were synthesized using sodium montmorillonite as nano-clay. Acrylamide and meth-ylenebisacrylamide were used as monomer and crosslinker, respectively. The structure of nanocomposite hydrogels was investigated by XRD and SEM techniques. Swelling behavior of nanocomposite hydrogels was studied by varying clay and carrageenan contents as well as methylenebisacrylamide concentration. An optimum swelling capacity was achieved at 12% of sodium... 

Polyurethane (PU) nanocomposites with 0, 1, 3, 5, and 7 wt-% nanoclay contents were prepared. X-ray diffraction patterns, transmission electron microscopy images, tensile test, and thermogravimetric analysis were utilised to reveal the morphological, mechanical, and thermal-resistant properties of the prepared nanocomposites. The exfoliated structure was obtained for nanoclay contents up to 3 wt-%. Incorporation of nanoclay to the PU matrix prompted the thermal stability of the polymer. A nanocomposite filled with 3 wt-% nanoclay showed the best tensile strength in the prepared nanocomposites. Subsequently, the nanocomposite with the 3 wt-% nanoclay was reinforced with carbon and glass... 

Foams for biomedical applications were made from polyvinyl alcohol, polyvinyl alcohol / polyvinyl pyrrolidone blend and their nanocomposites with nanoclay by clean processes. Air was entrapped into the aqueous polymer solutions during vigorous mixing and then the solutions were freeze-dried. The foams structure was stabilized by crosslinking via gamma irradiation without using any harmful chemicals. The hydrophilic biocompatible foams possessed interconnected open cell structure with remarkable capacity to absorb and retain water. The foams in wet state were soft and flexible. Desirable pore structure and higher water absorption was obtained at a solution concentration of 5 wt% for both... 

In this study, injectable PEG-based hydrogels containing Laponite particles with mechanical and structural properties close to the natural articular cartilage are introduced. The nanocomposites are fabricated by imide ring opening reactions utilizing synthesized copolymers containing PEG blocks and nanoclay through a two-step thermal poly-(amic acid) process. Butane diamine is used as nucleophilic reagent and hydrogels with interconnected pores with sizes in the range of 100–250 µm are prepared. Improved viscoelastic properties compared with the conventional PEG hydrogels are shown. Evaluation of cell viability utilizing human mesenchymal stem cells determines cytocompatibility of the... 

In this investigation, core-shell rubber particles and organically modified clay were added to an epoxy resin and the changes in mechanical behavior were studied. As expected, the yield strength of the organoclay-filled epoxies increased modestly with increasing clay content and the yield strength of the rubber-modified compounds decreased with rubber content. Interestingly, the compressive yield strength of epoxy resins containing both rubber particles and organoclay (a.k.a. hybrid nanocomposites) was found to be independent on organoclay content (up to 5 phr). The fracture toughness of organoclay-filled epoxies increased modestly with clay content and, as expected, the increases in... 

Novel montmorillonite (Mt) chitosan/poly(vinyl alcohol) (PVA) nanocomposite electrospun nanofibrous membranes (ENM) were prepared and utilized for the treatment of colored wastewater. The Mt. with different mass percentages (0, 1.0, 2.0 and 3.0 mass%) was added to the membrane structure, and its effect on morphology, pore size, porosity, mechanical strength, and permeation properties of ENM were investigated. The fabricated membranes were used as affinity membranes for dye removal with ultrafast permeating adsorption. The results showed that incorporating Mt. as a reinforcing agent improved the nanocomposite ENM resistance to compaction. Young's modulus for the prepared membranes increased... 

Following our previous work on morphology, corrosion resistance and thermal properties of unsaturated polyester (UP)/nanoclay composites, the effect of electron beam (EB) irradiation on mechanical properties of UP/nanoclay composites with various nanoclay contents is investigated in this work. Moreover, influence of EB irradiation with doses of 100, 500 and 1000 kGy on tensile properties and hardness of nanocomposite was examined. FTIR spectroscopy was employed to examine the effect of irradiation on chemical structure of polymer. EB irradiation up to 500 kGy led to the improvement of tensile strength and hardness of the samples. The best mechanical properties were observed for the... 

In directional drilling, the most important thing that leads to pulling out the drill string is end of mud motor working life. Considering the working conditions of down hole mud motors; increasing the mechanical properties of their stator’s elastomer is crucial. Some attempts were done to increase the motor performance through geometrical changes but lack of material improvement is significant in previous studies. In this study, NBR/nanoclay composite samples were prepared through melt intercalation in an internal mixer and tested with regard to the temperature and drilling mud of down hole. Hardness, tear, fatigue and tensile test results of neat NBR elastomer and nanocomposite of NBR and...